Traffic-Driven Energy Efficient Operational Mechanisms in Cellular Access Networks

Recent explosive growth in mobile data traffic is increasing energy consumption in cellular networks at an incredible rate. Moreover, as a direct result of the conventional static network provisioning approach, a significant amount of electrical energy is being wasted in the existing networks. Therefore, in recent time, the issue of designing energy efficient cellular networks has drawn significant attention, which is also the foremost motivation behind this research. The proposed research is particularly focused on the design of self-organizing type traffic-sensitive dynamic network reconfiguring mechanisms for energy efficiency in cellular systems. Under the proposed techniques, radio access networks (RANs) are adaptively reconfigured using less equipment leading to reduced energy utilization. Several energy efficient cellular network frameworks by employing inter-base station (BS) cooperation in RANs are proposed. Under these frameworks, based on the instantaneous traffic demand, BSs are dynamically switched between active and sleep modes by redistributing traffic among them and thus, energy savings is achieved. The focus is then extended to exploiting the availability of multiple cellular networks for extracting energy savings through inter-RAN cooperation. Mathematical models for both of these single-RAN and multi-RAN cooperation mechanisms are also formulated. An alternative energy saving technique using dynamic sectorization (DS) under which some of the sectors in the underutilized BSs are turned into sleep mode is also proposed. Algorithms for both the distributed and the centralized implementations are developed. Finally, a two-dimensional energy efficient network provisioning mechanism is proposed by jointly applying both the DS and the dynamic BS switching. Extensive simulations are carried out, which demonstrate the capability of the proposed mechanisms in substantially enhancing the energy efficiency of cellular networks

A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives

The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain

Joint relay selection and bandwidth allocation for cooperative relay network

Cooperative communication that exploits multiple relay links offers significant performance improvement in terms of coverage and capacity for mobile data subscribers in hierarchical cellular network. Since cooperative communication utilizes multiple relay links, complexity of the network is increased due to the needs for efficient resource allocation. Besides, usage of multiple relay links leads to Inter- Cell Interference (ICI). The main objective of this thesis is to develop efficient resource allocation scheme minimizes the effect of ICI in cooperative relay network. The work proposed a joint relay selection and bandwidth allocation in cooperative relay network that ensures high achievable data rate with high user satisfaction and low outage percentage. Two types of network models are considered: single cell network and multicell network. Joint Relay Selection and Bandwidth Allocation with Spatial Reuse (JReSBA_SR) and Optimized JReSBA_SR (O_JReSBA_SR) are developed for single cell network. JReSBA_SR considers link quality and user demand for resource allocation, and is equipped with spatial reuse to support higher network load. O_JReSBA_SR is an enhancement of JReSBA_SR with decision strategy based on Markov optimization. In multicell network, JReSBA with Interference Mitigation (JReSBA_IM) and Optimized JReSBA_IM (O_JReSBA_IM) are developed. JReSBA_IM deploys sectored-Fractional Frequency Reuse (sectored- FFR) partitioning concept in order to minimize the effect of ICI between adjacent cells. The performance is evaluated in terms of cell achievable rate, Outage Percentage (OP) and Satisfaction Index (SI). The result for single cell network shows that JReSBA_SR has notably improved the cell achievable rate by 35.0%, with reduced OP by 17.7% compared to non-joint scheme at the expense of slight increase in complexity at Relay Node (RN). O_JReSBA_SR has further improved the cell achievable rate by 13.9% while maintaining the outage performance with reduced complexity compared to JReSBA_SR due to the effect of optimization. The result for multicell network shows that JReSBA_IM enhances the cell achievable rate up to 65.1% and reduces OP by 35.0% as compared to benchmark scheme. Similarly, O_JReSBA_IM has significantly reduced the RN complexity of JReSBA_IM scheme, improved the cell achievable rate up to 9.3% and reduced OP by 1.3%. The proposed joint resource allocation has significantly enhanced the network performance through spatial frequency reuse, efficient, fair and optimized resource allocation. The proposed resource allocation is adaptable to variation of network load and can be used in any multihop cellular network such as Long Term Evolution-Advanced (LTE-A) network

Energy efficiency in cellular wireless networks

Energy efficiency of Long Term Evolution (LTE) cellular communication networks has become a major concern for network operators, not only to reduce the operational costs, but also to reduce their environmental effects. Within LTE cellular networks, base stations are responsible for most of the energy consumption, consuming 70-95% or more of the network power depending on the network topology, configuration, radio technology and data rates that are used. Power control is an important function in cellular wireless networks and refers to setting the output power levels of transmitters, termed eNodeB in the downlink and user equipment (UEs) in the uplink. LTE utilizes two different mechanisms for uplink power control: Open Loop Power Control (OLPC) and Closed Loop Power Control (CLPC). Uplink OLPC is performed by the UE following eNodeB configuration and can compensate for long term channel variation such as path loss and shadowing. The uplink CLPC mechanism attempts to improve power control performance by compensating fast channel variations due to multipath fading. In CLPC the eNodeB sends Transmit Power Control (TPC) commands to the UE to adjust the UE’s transmit power. This thesis focuses on an Open Loop Power Control (OLPC) scheme for LTE uplink by using the Okumura-Hata propagation path loss model to set the User Equipment (UE) uplink transmit power control parameters in order to reduce the UE energy consumption. In general, the UE requires more power to connect to distant base stations than closer base stations and therefore this thesis analyses the required power levels using the Okumura-Hata propagation path loss model. Estimation of path loss is very important in initial deployment of wireless network and cell planning. This thesis analyses the Okumura-Hata propagation path loss in different receiver antenna heights (

Capacity Enhancement Approaches for Long Term Evolution networks: Capacity Enhancement-Inspired Self-Organized Networking to Enhance Capacity and Fairness of Traffic in Long Term Evolution Networks by Utilising Dynamic Mobile Base-Stations

The long-term evolution (LTE) network has been proposed to provide better network capacity than the earlier 3G network. Driven by the market, the conventional LTE (3G) network standard could not achieve the expectations of the international mobile telecommunications advanced (IMT-Advanced) standard. To satisfy this gap, the LTE-Advanced was introduced with additional network functionalities to meet up with the IMT-Advanced Standard. In addition, due to the need to minimize operational expenditure (OPEX) and reduce human interventions, the wireless cellular networks are required to be self-aware, self-reconfigurable, self-adaptive and smart. An example of such network involves transceiver base stations (BTSs) within a self-organizing network (SON). Besides these great breakthroughs, the conventional LTE and LTE-Advanced networks have not been designed with the intelligence of scalable capacity output especially in sudden demographic changes, namely during events of football, malls, worship centres or during religious and cultural festivals. Since most of these events cannot be predicted, modern cellular networks must be scalable in terms of capacity and coverage in such unpredictable demographic surge. Thus, the use of dynamic BTSs is proposed to be used in modern and future cellular networks for crowd and demographic change managements. Dynamic BTSs are complements of the capability of SONs to search, determine and deploy less crowded/idle BTSs to densely crowded cells for scalable capacity management. The mobile BTSs will discover areas of dark coverages and fill-up the gap in terms of providing cellular services. The proposed network relieves the LTE network from overloading thus reducing packet loss, delay and improves fair load sharing. In order to trail the best (least) path, a bio-inspired optimization algorithm based on swarm-particle optimization is proposed over the dynamic BTS network. It uses the ant-colony optimization algorithm (ACOA) to find the least path. A comparison between an optimized path and the un-optimized path showed huge gain in terms of delay, fair load sharing and the percentage of packet loss

RF Coverage Planning And Analysis With Adaptive Cell Sectorization In Millimeter Wave 5G Networks

The advancement of Fifth Generation Network (5G) technology is well underway, with Mobile Network Operators (MNOs) globally commencing the deployment of 5G networks within the mid-frequency spectrum range (3GHz–6GHz). Nevertheless, the escalating demands for data traffic are compelling MNOs to explore the high-frequency spectrum (24GHz–100GHz), which offers significantly larger bandwidth (400MHz-800 MHz) compared to the mid-frequency spectrum (3GHz–6GHz), which typically provides 50MHz-100MHz of bandwidth. However, it is crucial to note that the higher-frequency spectrum imposes substantial challenges due to exceptionally high free space propagation loss, resulting in 5G cell site coverage being limited to several hundred meters, in contrast to the several kilometers achievable with 4G. Consequently, MNOs are faced with the formidable task of accurately planning and deploying hundreds of new 5G cells to cover the same areas served by a single 4G cell.This dissertation embarks on a comprehensive exploration of Radio Frequency (RF) coverage planning for 5G networks, initially utilizing a conventional three-sector cell architecture. The coverage planning phase reveals potential challenges, including coverage gaps and poor Signal-to-Interference-plus-Noise Ratio (SINR). In response to these issues, the dissertation introduces an innovative cell site architecture that embraces both nine and twelve sector cells, enhancing RF coverage through the adoption of an advanced antenna system designed with subarrays, offering adaptive beamforming and beam steering capabilities. To further enhance energy efficiency, the dissertation introduces adaptive higher-order cell-sectorization (e.g., nine sector cells and twelve sector cells). In this proposed method, all sectors within a twelve-sector cell remain active during peak hours (e.g., daytime) and are reduced to fewer sectors (e.g., nine sectors or six sectors per cell) during off-peak hours (e.g., nighttime). This dynamic adjustment is facilitated by an advanced antenna system utilizing sub-array architecture, which employs adaptive beamforming and beam steering to tailor the beamwidth and radiation angle of each active sector. Simulation results unequivocally demonstrate significant enhancements in RF coverage and SINR with the implementation of higher-order cell-sectorization. Furthermore, the proposed adaptive cell-sectorization method significantly reduces energy consumption during off-peak hours. In addition to addressing RF coverage planning, this dissertation delves into the numerous challenges associated with deploying 5G networks in the higher frequency spectrum (30GHz-300GHz). It encompasses issues such as precise cell site planning, location acquisition, propagation modeling, energy efficiency, backhauling, and more. Furthermore, the dissertation offers valuable insights into future research directions aimed at effectively surmounting these challenges and optimizing the deployment of 5G networks in the high-frequency spectrum

Técnicas de pré-codificação para sistemas multicelulares coordenados

Doutoramento em TelecomunicaçõesCoordenação Multicélula é um tópico de investigação em rápido crescimento e uma solução promissora para controlar a interferência entre células em sistemas celulares, melhorando a equidade do sistema e aumentando a sua capacidade. Esta tecnologia já está em estudo no LTEAdvanced sob o conceito de coordenação multiponto (COMP). Existem várias abordagens sobre coordenação multicélula, dependendo da quantidade e do tipo de informação partilhada pelas estações base, através da rede de suporte (backhaul network), e do local onde essa informação é processada, i.e., numa unidade de processamento central ou de uma forma distribuída em cada estação base. Nesta tese, são propostas técnicas de pré-codificação e alocação de potência considerando várias estratégias: centralizada, todo o processamento é feito na unidade de processamento central; semidistribuída, neste caso apenas parte do processamento é executado na unidade de processamento central, nomeadamente a potência alocada a cada utilizador servido por cada estação base; e distribuída em que o processamento é feito localmente em cada estação base. Os esquemas propostos são projectados em duas fases: primeiro são propostas soluções de pré-codificação para mitigar ou eliminar a interferência entre células, de seguida o sistema é melhorado através do desenvolvimento de vários esquemas de alocação de potência. São propostas três esquemas de alocação de potência centralizada condicionada a cada estação base e com diferentes relações entre desempenho e complexidade. São também derivados esquemas de alocação distribuídos, assumindo que um sistema multicelular pode ser visto como a sobreposição de vários sistemas com uma única célula. Com base neste conceito foi definido uma taxa de erro média virtual para cada um desses sistemas de célula única que compõem o sistema multicelular, permitindo assim projectar esquemas de alocação de potência completamente distribuídos. Todos os esquemas propostos foram avaliados em cenários realistas, bastante próximos dos considerados no LTE. Os resultados mostram que os esquemas propostos são eficientes a remover a interferência entre células e que o desempenho das técnicas de alocação de potência propostas é claramente superior ao caso de não alocação de potência. O desempenho dos sistemas completamente distribuídos é inferior aos baseados num processamento centralizado, mas em contrapartida podem ser usados em sistemas em que a rede de suporte não permita a troca de grandes quantidades de informação.Multicell coordination is a promising solution for cellular wireless systems to mitigate inter-cell interference, improving system fairness and increasing capacity and thus is already under study in LTE-A under the coordinated multipoint (CoMP) concept. There are several coordinated transmission approaches depending on the amount of information shared by the transmitters through the backhaul network and where the processing takes place i.e. in a central processing unit or in a distributed way on each base station. In this thesis, we propose joint precoding and power allocation techniques considering different strategies: Full-centralized, where all the processing takes place at the central unit; Semi-distributed, in this case only some process related with power allocation is done at the central unit; and Fulldistributed, where all the processing is done locally at each base station. The methods are designed in two phases: first the inter-cell interference is removed by applying a set of centralized or distributed precoding vectors; then the system is further optimized by centralized or distributed power allocation schemes. Three centralized power allocation algorithms with per-BS power constraint and different complexity tradeoffs are proposed. Also distributed power allocation schemes are proposed by considering the multicell system as superposition of single cell systems, where we define the average virtual bit error rate (BER) of interference-free single cell system, allowing us to compute the power allocation coefficients in a distributed manner at each BS. All proposed schemes are evaluated in realistic scenarios considering LTE specifications. The numerical evaluations show that the proposed schemes are efficient in removing inter-cell interference and improve system performance comparing to equal power allocation. Furthermore, fulldistributed schemes can be used when the amounts of information to be exchanged over the backhaul is restricted, although system performance is slightly degraded from semi-distributed and full-centralized schemes, but the complexity is considerably lower. Besides that for high degrees of freedom distributed schemes show similar behaviour to centralized ones