229 research outputs found
Robust Transmissions in Wireless Powered Multi-Relay Networks with Chance Interference Constraints
In this paper, we consider a wireless powered multi-relay network in which a
multi-antenna hybrid access point underlaying a cellular system transmits
information to distant receivers. Multiple relays capable of energy harvesting
are deployed in the network to assist the information transmission. The hybrid
access point can wirelessly supply energy to the relays, achieving multi-user
gains from signal and energy cooperation. We propose a joint optimization for
signal beamforming of the hybrid access point as well as wireless energy
harvesting and collaborative beamforming strategies of the relays. The
objective is to maximize network throughput subject to probabilistic
interference constraints at the cellular user equipment. We formulate the
throughput maximization with both the time-switching and power-splitting
schemes, which impose very different couplings between the operating parameters
for wireless power and information transfer. Although the optimization problems
are inherently non-convex, they share similar structural properties that can be
leveraged for efficient algorithm design. In particular, by exploiting
monotonicity in the throughput, we maximize it iteratively via customized
polyblock approximation with reduced complexity. The numerical results show
that the proposed algorithms can achieve close to optimal performance in terms
of the energy efficiency and throughput.Comment: 14 pages, 8 figure
User Association in 5G Networks: A Survey and an Outlook
26 pages; accepted to appear in IEEE Communications Surveys and Tutorial
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Simultaneous Wireless Information and Power Transfer for Decode-and-Forward Multi-Hop Relay Systems in Energy-Constrained IoT Networks
This paper studies a multi-hop decode-and-forward (DF) simultaneous wireless
information and power transfer (SWIPT) system where a source sends data to a
destination with the aid of multi-hop relays which do not depend on an external
energy source. To this end, we apply power splitting (PS) based SWIPT relaying
protocol so that the relays can harvest energy from the received signals from
the previous hop to reliably forward the information of the source to the
destination. We aim to solve two optimization problems relevant to our system
model. First, we minimize the transmit power at the source under the individual
quality-of-service (QoS) threshold constraints of the relays and the
destination nodes by optimizing PS ratios at the relays. The second is to
maximize the minimum system achievable rate by optimizing the PS ratio at each
relay. Based on convex optimization techniques, the globally optimal PS ratio
solution is obtained in closed-form for both problems. By setting the QoS
threshold constraint the same for each node for the source transmit power
problem, we discovered that either the minimum source transmit power or the
maximum system throughput can be found using the same approach. Numerical
results demonstrate the superiority of the proposed optimal SWIPT PS design
over conventional fixed PS ratio schemes.Comment: 14 pages, 14 figures, Accepted for Publication in IEEE Internet of
Things Journa
Energy-efficient non-orthogonal multiple access for wireless communication system
Non-orthogonal multiple access (NOMA) has been recognized as a potential solution for enhancing the throughput of next-generation wireless communications. NOMA is a potential option for 5G networks due to its superiority in providing better spectrum efficiency (SE) compared to orthogonal multiple access (OMA). From the perspective of green communication, energy efficiency (EE) has become a new performance indicator. A systematic literature review is conducted to investigate the available energy efficient approach researchers have employed in NOMA. We identified 19 subcategories related to EE in NOMA out of 108 publications where 92 publications are from the IEEE website. To help the reader comprehend, a summary for each category is explained and elaborated in detail. From the literature review, it had been observed that NOMA can enhance the EE of wireless communication systems. At the end of this survey, future research particularly in machine learning algorithms such as reinforcement learning (RL) and deep reinforcement learning (DRL) for NOMA are also discussed
Relaying in the Internet of Things (IoT): A Survey
The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions
- …