A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future

A High Altitude Platform Station (HAPS) is a network node that operates in the stratosphere at an of altitude around 20 km and is instrumental for providing communication services. Precipitated by technological innovations in the areas of autonomous avionics, array antennas, solar panel efficiency levels, and battery energy densities, and fueled by flourishing industry ecosystems, the HAPS has emerged as an indispensable component of next-generations of wireless networks. In this article, we provide a vision and framework for the HAPS networks of the future supported by a comprehensive and state-of-the-art literature review. We highlight the unrealized potential of HAPS systems and elaborate on their unique ability to serve metropolitan areas. The latest advancements and promising technologies in the HAPS energy and payload systems are discussed. The integration of the emerging Reconfigurable Smart Surface (RSS) technology in the communications payload of HAPS systems for providing a cost-effective deployment is proposed. A detailed overview of the radio resource management in HAPS systems is presented along with synergistic physical layer techniques, including Faster-Than-Nyquist (FTN) signaling. Numerous aspects of handoff management in HAPS systems are described. The notable contributions of Artificial Intelligence (AI) in HAPS, including machine learning in the design, topology management, handoff, and resource allocation aspects are emphasized. The extensive overview of the literature we provide is crucial for substantiating our vision that depicts the expected deployment opportunities and challenges in the next 10 years (next-generation networks), as well as in the subsequent 10 years (next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial

A Survey on Energy Optimization Techniques in UAV-Based Cellular Networks: From Conventional to Machine Learning Approaches

Wireless communication networks have been witnessing an unprecedented demand due to the increasing number of connected devices and emerging bandwidth-hungry applications. Albeit many competent technologies for capacity enhancement purposes, such as millimeter wave communications and network densification, there is still room and need for further capacity enhancement in wireless communication networks, especially for the cases of unusual people gatherings, such as sport competitions, musical concerts, etc. Unmanned aerial vehicles (UAVs) have been identified as one of the promising options to enhance the capacity due to their easy implementation, pop up fashion operation, and cost-effective nature. The main idea is to deploy base stations on UAVs and operate them as flying base stations, thereby bringing additional capacity to where it is needed. However, because the UAVs mostly have limited energy storage, their energy consumption must be optimized to increase flight time. In this survey, we investigate different energy optimization techniques with a top-level classification in terms of the optimization algorithm employed; conventional and machine learning (ML). Such classification helps understand the state of the art and the current trend in terms of methodology. In this regard, various optimization techniques are identified from the related literature, and they are presented under the above mentioned classes of employed optimization methods. In addition, for the purpose of completeness, we include a brief tutorial on the optimization methods and power supply and charging mechanisms of UAVs. Moreover, novel concepts, such as reflective intelligent surfaces and landing spot optimization, are also covered to capture the latest trend in the literature.Comment: 41 pages, 5 Figures, 6 Tables. Submitted to Open Journal of Communications Society (OJ-COMS

A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence

Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be leveraged as cost-effective aerial platforms to provide ground users with enhanced communication services by exploiting their high cruising altitude and controllable maneuverability in three-dimensional (3D) space. On the other hand, providing such communication services simultaneously for both UAV and ground users poses new challenges due to the need for ubiquitous 3D signal coverage as well as the strong air-ground network interference. Besides the requirement of high-performance wireless communications, the ability to support effective and efficient sensing as well as network intelligence is also essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting aerial and ground users. In this paper, we provide a comprehensive overview of the latest research efforts on integrating UAVs into cellular networks, with an emphasis on how to exploit advanced techniques (e.g., intelligent reflecting surface, short packet transmission, energy harvesting, joint communication and radar sensing, and edge intelligence) to meet the diversified service requirements of next-generation wireless systems. Moreover, we highlight important directions for further investigation in future work.Comment: Accepted by IEEE JSA

Multi-UAV Enabled Integrated Sensing and Wireless Powered Communication: A Robust Multi-Objective Approach

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where multiple unmanned aerial vehicle (UAV)-based radars serve multiple clusters of energy-limited communication users in addition to their sensing functionality. In this architecture, the radars sense the environment in phase 1 (namely sensing phase) and meanwhile, the communications users (nodes) harvest and store the energy from the radar transmit signals. The stored energy is then used for information transmission from the nodes to UAVs in phase 2, i.e., uplink phase. Performance of the radar systems depends on the transmit signals as well as the receive filters; the energy of the transmit signals also affects the communication network because it serves as the source of uplink powers. Therefore, we cast a multi-objective design problem addressing performance of both radar and communication systems via optimizing UAV trajectories, radar transmit waveforms, radar receive filters, time scheduling and uplink powers. The design problem is further formulated as a robust non-convex optimization problem taking into account the the user location uncertainty. Hence, we devise a method based on alternating optimization followed by concepts of fractional programming, S-procedure, and tricky majorization-minimization (MM) technique to tackle it. Numerical examples illustrate the effectiveness of the proposed method for different scenarios

Autonomisen multikopteriparven hallinta etsintä- ja pelastustehtävissä

This thesis presents the requirements and implementation of a Ground Control Station (GCS) application for controlling a fleet of multicopters to perform a Search And Rescue (SAR) mission. The requirements are put together by analysing existing drone types, SAR practices, and available GCS applications. Multicopters are found to be the most feasible drone to use for the SAR use case because of their maneuverability, despite not having the best endurance. Several existing area coverage methods are presented and their usefulness is analyzed for SAR scenarios where different amounts of prior knowledge is available. It is stated that most search patterns can be used with a fleet of drones, by creating drone formations and by dividing the target area into sub-areas. It is noted that most currently available GCS applications are focused on controlling a single drone for either industrial or hobby use. A proof of concept prototype is developed on top of an open source GCS and tested in field tests. Based on all the previous learnings from the protype and research, a new GCS is designed and developed. The development on optimizing communications between the GCS and the autopilot leads to a filed patent application. The new software is tested with three multicopters in a water rescue scenario and several user interface improvements are made as a result of the learnings. The development of a GCS for controlling a drone fleet for search and rescue is proven feasible.Työssä esitetään multikopteriparven hallintaan käytettävän Ground Control Station (GCS) ohjelmiston vaatimukset ja toteutus Search And Rescue (SAR) etsintä- ja pelastustehtävien suorittamiseksi. Vaatimukset kootaan yhteen analysoimalla saatavilla olevia droonityyppejä, SAR pelastuskäytäntöjä, sekä GCS ohjelmistoja. Multikopterit osoittautuvat liikkuvuutensa ansiosta pelastustehtäviin sopivimmaksi vaihtoehdoksi, vaikka niiden saavutettavissa oleva lentoaika ei ole parhaimmasta päästä. Erilaisia etsintämetodeja esitetään alueiden kattamiseksi ja niiden hyödyllisyyttä analysoidaan SAR tilanteissa, joissa ennakkotietoa on saatavilla vaihtelevasti. Osoitetaan, että useimpia etsintäalgoritmeja voidaan hyödyntää drooniparvella, muodostamalla lentomuodostelmia, sekä jakamalla kohdealue pienempiin osa-alueisiin. Huomataan, että suurin osa tällä hetkellä saatavilla olevista GCS ohjelmistoista on suunnattu teollisuuden tai harrastelijoiden käyttöön, pääasiassa yksittäisen droonin hallintaan. Prototyyppi kehitetään avoimen lähdekoodin GCS ohjelmiston pohjalta ja testataan kenttätesteissä. Tästä saadun tiedon avulla suunnitellaan ja kehitetään uusi GCS ohjelmisto. Kehitystyö viestinnän optimoinniksi autopilotin ja GCS ohjelmiston välillä johtaa patenttihakemukseen. Uusi ohjelmisto testataan kolmella multikopterilla vesipelastustilanteessa ja sen seurauksena käyttöliittymään tehdään useita parannuksia. GCS ohjelmiston luominen drooniparven hallintaan etsintä- ja pelastustehtävissä todetaan mahdolliseksi