5,526 research outputs found
Smart handoff technique for internet of vehicles communication using dynamic edge-backup node
© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence.
The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin
MIRAI Architecture for Heterogeneous Network
One of the keywords that describe next-generation wireless communications is "seamless." As part of the e-Japan Plan promoted by the Japanese Government, the Multimedia Integrated Network by Radio Access Innovation project has as its goal the development of new technologies to enable seamless integration of various wireless access systems for practical use by 2005. This article describes a heterogeneous network architecture including a common tool, a common platform, and a common access. In particular, software-defined radio technologies are used to develop a multiservice user terminal to access different wireless networks. The common platform for various wireless networks is based on a wireless-supporting IPv6 network. A basic access network, separated from other wireless access networks, is used as a means for wireless system discovery, signaling, and paging. A proof-of-concept experimental demonstration system is available
Efficient vertical handover in heterogeneous low-power wide-area networks
As the Internet of Things (IoT) continues to expand, the need to combine communication technologies to cope with the limitations of one another and to support more diverse requirements will proceed to increase. Consequently, we started to see IoT devices being equipped with multiple radio technologies to connect to different networks over time. However, the detection of the available radio technologies in an energy-efficient way for devices with limited battery capacity and processing power has not yet been investigated. As this is not a straightforward task, a novel approach in such heterogeneous networks is required. This article analyzes different low-power wide-area network technologies and how they can be integrated in such a heterogeneous system. Our contributions are threefold. First, an optimal protocol stack for a constrained device with access to multiple communication technologies is put forward to hide the underlying complexity for the application layer. Next, the architecture to hide the complexity of a heterogeneous network is presented. Finally, it is demonstrated how devices with limited processing power and battery capacity can have access to higher bandwidth networks combined with longer range networks and on top are able to save energy compared to their homogeneous counterparts, by measuring the impact of the novel vertical handover algorithm
Proactive TCP mechanism to improve Handover performance in Mobile Satellite and Terrestrial Networks
Emerging standardization of Geo Mobile Radio (GMR-1) for satellite system is
having strong resemblance to terrestrial GSM (Global System for Mobile
communications) at the upper protocol layers and TCP (Transmission Control
Protocol) is one of them. This space segment technology as well as terrestrial
technology, is characterized by periodic variations in communication properties
and coverage causing the termination of ongoing call as connections of Mobile
Nodes (MN) alter stochastically. Although provisions are made to provide
efficient communication infrastructure this hybrid space and terrestrial
networks must ensure the end-to-end network performance so that MN can move
seamlessly among these networks. However from connectivity point of view
current TCP performance has not been engineered for mobility events in
multi-radio MN. Traditionally, TCP has applied a set of congestion control
algorithms (slow-start, congestion avoidance, fast retransmit, fast recovery)
to probe the currently available bandwidth on the connection path. These
algorithms need several round-trip times to find the correct transmission rate
(i.e. congestion window), and adapt to sudden changes connectivity due to
handover. While there are protocols to maintain the connection continuity on
mobility events, such as Mobile IP (MIP) and Host Identity Protocol (HIP), TCP
performance engineering has had less attention. TCP is implemented as a
separate component in an operating system, and is therefore often unaware of
the mobility events or the nature of multi-radios' communication. This paper
aims to improve TCP communication performance in Mobile satellite and
terrestrial networks.Comment: 5 pages, 2 figure
A Hybrid Model to Extend Vehicular Intercommunication V2V through D2D Architecture
In the recent years, many solutions for Vehicle to Vehicle (V2V)
communication were proposed to overcome failure problems (also known as dead
ends). This paper proposes a novel framework for V2V failure recovery using
Device-to-Device (D2D) communications. Based on the unified Intelligent
Transportation Systems (ITS) architecture, LTE-based D2D mechanisms can improve
V2V dead ends failure recovery delays. This new paradigm of hybrid V2V-D2D
communications overcomes the limitations of traditional V2V routing techniques.
According to NS2 simulation results, the proposed hybrid model decreases the
end to end delay (E2E) of messages delivery. A complete comparison of different
D2D use cases (best & worst scenarios) is presented to show the enhancements
brought by our solution compared to traditional V2V techniques.Comment: 6 page
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
Energy efficiency in heterogeneous wireless access networks
In this article, we bring forward the important aspect of energy savings in wireless access networks. We specifically focus on the energy saving opportunities in the recently evolving heterogeneous networks (HetNets), both Single- RAT and Multi-RAT. Issues such as sleep/wakeup cycles and interference management are discussed for co-channel Single-RAT HetNets. In addition to that, a simulation based study for LTE macro-femto HetNets is presented, indicating the need for dynamic energy efficient resource management schemes. Multi-RAT HetNets also come with challenges such as network integration, combined resource management and network selection. Along with a discussion on these challenges, we also investigate the performance of the conventional WLAN-first network selection mechanism in terms of energy efficiency (EE) and suggest that EE can be improved by the application of intelligent call admission control policies
- …