A Bluetooth 5 Opportunistic Edge Computing System for Vehicular Scenarios

[Abstract]: The limitations of many IoT devices in terms of storage, computing power and energy consumption require them to be connected to other devices when performing computationally intensive tasks, as happens with IoT systems based on edge computing architectures. However, the lack of wireless connectivity in the places where IoT nodes are deployed or through which they move is still a problem. One of the solutions to mitigate this problem involves using opportunistic networks, which provide connectivity and processing resources efficiently while reducing the communications traffic with remote clouds. Thus, opportunistic networks are helpful in situations when wireless communication coverage is not available, as occurs in certain rural areas, during natural disasters, in wars or when other factors cause network disruptions, as well as in other IoT scenarios in which the cloud becomes saturated (for example, due to an excessive amount of concurrent communications or when denial-of-service (DoS) attacks occur). This article presents the design and initial validation of a novel opportunistic edge computing (OEC) system based on Bluetooth 5 and the use of low-cost single-board computers (SBCs). After describing the proposed OEC system, experimental results are presented for a real opportunistic vehicular IoT scenario. Specifically, the latency and packet loss are measured thanks to the use of an experimental testbed made of two separate IoT networks (each conformed by an IoT node and an OEC gateway): one located in a remote office and another one inside a moving vehicle, which was driven at different vehicular speeds. The obtained results show average latencies ranging from 716 to 955 ms with packet losses between 7% and 27%. As a result, the developed system is useful for providing opportunistic services to moving IoT nodes with relatively low latency requirements.Xunta de Galicia; ED431C 2020/15Xunta de Galicia; ED431G 2019/01Ministerio de Ciencia e Innovación; PID2020-118857RA-I0

Raamistik mobiilsete asjade veebile

Internet on oma arengus läbi aastate jõudnud järgmisse evolutsioonietappi - asjade internetti (ingl Internet of Things, lüh IoT). IoT ei tähista ühtainsat tehnoloogiat, see võimaldab eri seadmeil - arvutid, mobiiltelefonid, autod, kodumasinad, loomad, virtuaalsensorid, jne - omavahel üle Interneti suhelda, vajamata seejuures pidevat inimesepoolset seadistamist ja juhtimist. Mobiilseadmetest nagu näiteks nutitelefon ja tahvelarvuti on saanud meie igapäevased kaaslased ning oma mitmekülgse võimekusega on nad motiveerinud teadustegevust mobiilse IoT vallas. Nutitelefonid kätkevad endas võimekaid protsessoreid ja 3G/4G tehnoloogiatel põhinevaid internetiühendusi. Kuid kui kasutada seadmeid järjepanu täisvõimekusel, tühjeneb mobiili aku kiirelt. Doktoritöö esitleb energiasäästlikku, kergekaalulist mobiilsete veebiteenuste raamistikku anduriandmete kogumiseks, kasutades kergemaid, energiasäästlikumaid suhtlustprotokolle, mis on IoT keskkonnale sobilikumad. Doktoritöö käsitleb põhjalikult energia kokkuhoidu mobiilteenuste majutamisel. Töö käigus loodud raamistikud on kontseptsiooni tõestamiseks katsetatud mitmetes juhtumiuuringutes päris seadmetega.The Internet has evolved, over the years, from just being the Internet to become the Internet of Things (IoT), the next step in its evolution. IoT is not a single technology and it enables about everything from computers, mobile phones, cars, appliances, animals, virtual sensors, etc. that connect and interact with each other over the Internet to function free from human interaction. Mobile devices like the Smartphone and tablet PC have now become essential to everyday life and with extended capabilities have motivated research related to the mobile Internet of Things. Although, the recently developed Smartphones enjoy the high performance and high speed 3G/4G mobile Internet data transmission services, such high speed performances quickly drain the battery power of the mobile device. This thesis presents an energy efficient lightweight mobile Web service provisioning framework for mobile sensing utilizing the protocols that were designed for the constrained IoT environment. Lightweight protocols provide an energy efficient way of communication. Finally, this thesis highlights the energy conservation of the mobile Web service provisioning, the developed framework, extensively. Several case studies with the use of the proposed framework were implemented on real devices and has been thoroughly tested as a proof-of-concept.https://www.ester.ee/record=b522498

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

SenseLE:Exploiting spatial locality in decentralized sensing environments

Generally, smart devices, such as smartphones, smartwatches, or fitness trackers, communicate with each other indirectly, via cloud data centers. Sharing sensor data with a cloud data center as intermediary invokes transmission methods with high battery costs, such as 4G LTE or WiFi. By sharing sensor information locally and without intermediaries, we can use other transmission methods with low energy cost, such as Bluetooth or BLE. In this paper, we introduce Sense Low Energy (SenseLE), a decentralized sensing framework which exploits the spatial locality of nearby sensors to save energy in Internet-of-Things (IoT) environments. We demonstrate the usability of SenseLE by building a real-life application for estimating waiting times at queues. Furthermore, we evaluate the performance and resource utilization of our SenseLE Android implementation for different sensing scenarios. Our empirical evaluation shows that by exploiting spatial locality, SenseLE is able to reduce application response times (latency) by up to 74% and energy consumption by up to 56%

Trustee: A Trust Management System for Fog-enabled Cyber Physical Systems

In this paper, we propose a lightweight trust management system (TMS) for fog-enabled cyber physical systems (Fog-CPS). Trust computation is based on multi-factor and multi-dimensional parameters, and formulated as a statistical regression problem which is solved by employing random forest regression model. Additionally, as the Fog-CPS systems could be deployed in open and unprotected environments, the CPS devices and fog nodes are vulnerable to numerous attacks namely, collusion, self-promotion, badmouthing, ballot-stuffing, and opportunistic service. The compromised entities can impact the accuracy of trust computation model by increasing/decreasing the trust of other nodes. These challenges are addressed by designing a generic trust credibility model which can countermeasures the compromise of both CPS devices and fog nodes. The credibility of each newly computed trust value is evaluated and subsequently adjusted by correlating it with a standard deviation threshold. The standard deviation is quantified by computing the trust in two configurations of hostile environments and subsequently comparing it with the trust value in a legitimate/normal environment. Our results demonstrate that credibility model successfully countermeasures the malicious behaviour of all Fog-CPS entities i.e. CPS devices and fog nodes. The multi-factor trust assessment and credibility evaluation enable accurate and precise trust computation and guarantee a dependable Fog-CPS system