Semi-persistent RRC protocol for machine-type communication devices in LTE networks

In this paper, we investigate the design of a radio resource control (RRC) protocol in the framework of long-term evolution (LTE) of the 3rd Generation Partnership Project regarding provision of low cost/complexity and low energy consumption machine-type communication (MTC), which is an enabling technology for the emerging paradigm of the Internet of Things. Due to the nature and envisaged battery-operated long-life operation of MTC devices without human intervention, energy efficiency becomes extremely important. This paper elaborates the state-of-the-art approaches toward addressing the challenge in relation to the low energy consumption operation of MTC devices, and proposes a novel RRC protocol design, namely, semi-persistent RRC state transition (SPRST), where the RRC state transition is no longer triggered by incoming traffic but depends on pre-determined parameters based on the traffic pattern obtained by exploiting the network memory. The proposed RRC protocol can easily co-exist with the legacy RRC protocol in the LTE. The design criterion of SPRST is derived and the signalling procedure is investigated accordingly. Based upon the simulation results, it is shown that the SPRST significantly reduces both the energy consumption and the signalling overhead while at the same time guarantees the quality of service requirements

Next Generation M2M Cellular Networks: Challenges and Practical Considerations

In this article, we present the major challenges of future machine-to-machine (M2M) cellular networks such as spectrum scarcity problem, support for low-power, low-cost, and numerous number of devices. As being an integral part of the future Internet-of-Things (IoT), the true vision of M2M communications cannot be reached with conventional solutions that are typically cost inefficient. Cognitive radio concept has emerged to significantly tackle the spectrum under-utilization or scarcity problem. Heterogeneous network model is another alternative to relax the number of covered users. To this extent, we present a complete fundamental understanding and engineering knowledge of cognitive radios, heterogeneous network model, and power and cost challenges in the context of future M2M cellular networks

System-level analysis of the tradeoffs between power saving and capacity/QoS with DRX in LTE

In an LTE cell, Discontinuous Reception (DRX) allows the central base station to configure User Equipment for periodic wake/sleep cycles, so as to save energy. Several parameters are associated to DRX operations, thus allowing for optimal performance with different traffic profiles (i.e., CBR-like, bursty, periodic arrivals of variable-sized packets, etc.). This work investigates how to configure these parameters and explores the tradeoff between power saving, on one side, and per-user QoS and cell capacity, on the other. Unlike previous work, mostly based on analytical models neglecting key aspects of LTE, our evaluation is carried out using a fully-fledged packet simulator. This allows us to discover previously unknown relationships and to propose configuration guidelines for operators

Green Cellular Networks: A Survey, Some Research Issues and Challenges

Energy efficiency in cellular networks is a growing concern for cellular operators to not only maintain profitability, but also to reduce the overall environment effects. This emerging trend of achieving energy efficiency in cellular networks is motivating the standardization authorities and network operators to continuously explore future technologies in order to bring improvements in the entire network infrastructure. In this article, we present a brief survey of methods to improve the power efficiency of cellular networks, explore some research issues and challenges and suggest some techniques to enable an energy efficient or "green" cellular network. Since base stations consume a maximum portion of the total energy used in a cellular system, we will first provide a comprehensive survey on techniques to obtain energy savings in base stations. Next, we discuss how heterogeneous network deployment based on micro, pico and femto-cells can be used to achieve this goal. Since cognitive radio and cooperative relaying are undisputed future technologies in this regard, we propose a research vision to make these technologies more energy efficient. Lastly, we explore some broader perspectives in realizing a "green" cellular network technologyComment: 16 pages, 5 figures, 2 table

A comprehensive simulation analysis of LTE Discontinuous Reception (DRX)

In an LTE cell, Discontinuous Reception (DRX) allows the central base station to configure User Equipments for periodic wake/sleep cycles, so as to save energy. DRX operations depend on several parameters, which can be tuned to achieve optimal performance with different traffic profiles (i.e., CBR vs. bursty, periodic vs. sporadic, etc.). This work investigates how to configure these parameters and explores the trade-off between power saving, on one side, and per-user QoS, on the other. Unlike previous work, chiefly based on analytical models neglecting key aspects of LTE, our evaluation is carried out via simulation. We use a fully-fledged packet simulator, which includes models of all the protocol stack, the applications and the relevant QoS metrics, and employ factorial analysis to assess the impact of the many simulation factors in a statistically rigorous way. This allows us to analyze a wider spectrum of scenarios, assessing the interplay of the LTE mechanisms and DRX, and to derive configuration guidelines

Energy and Spectral Efficiency Balancing Algorithm for Energy Saving in LTE Downlinks

In wireless network communication environments, Spectral Efficiency (SE) and Energy Efficiency (EE) are among the major indicators used for evaluating network performance. However, given the high demand for data rate services and the exponential growth of energy consumption, SE and EE continue to elicit increasing attention in academia and industries. Consequently, a study of the trade-off between these metrics is imperative. In contrast with existing works, this study proposes an efficient SE and EE trade-off algorithm for saving energy in downlink Long Term Evolution (LTE) networks to concurrently optimize SE and EE while considering battery life at the Base Station (BS). The scheme is formulated as a Multi-objective Optimization Problem (MOP) and its Pareto optimal solution is examined. In contrast with other algorithms that prolong battery life by considering the idle state of a BS, thereby increasing average delay and energy consumption, the proposed algorithm prolongs battery life by adjusting the initial and final states of a BS to minimize the average delay and the energy consumption. Similarly, the use of an omni-directional antenna to spread radio signals to the user equipment in all directions causes high interference and low spatial reuse. We propose using a directional antenna instead of an omni-directional antenna by transmitting signals in one direction which results in no or low interference and high spatial reuse. The proposed scheme has been extensively evaluated through simulation, where simulation results prove that the proposed scheme is efficiently able to decrease the average response delay, improve SE, and minimize energy consumption.Comment: 19 page

Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks

Conventional cellular wireless networks were designed with the purpose of providing high throughput for the user and high capacity for the service provider, without any provisions of energy efficiency. As a result, these networks have an enormous Carbon footprint. In this paper, we describe the sources of the inefficiencies in such networks. First we present results of the studies on how much Carbon footprint such networks generate. We also discuss how much more mobile traffic is expected to increase so that this Carbon footprint will even increase tremendously more. We then discuss specific sources of inefficiency and potential sources of improvement at the physical layer as well as at higher layers of the communication protocol hierarchy. In particular, considering that most of the energy inefficiency in cellular wireless networks is at the base stations, we discuss multi-tier networks and point to the potential of exploiting mobility patterns in order to use base station energy judiciously. We then investigate potential methods to reduce this inefficiency and quantify their individual contributions. By a consideration of the combination of all potential gains, we conclude that an improvement in energy consumption in cellular wireless networks by two orders of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843