2,721 research outputs found
Green compressive sampling reconstruction in IoT networks
In this paper, we address the problem of green Compressed Sensing (CS) reconstruction within Internet of Things (IoT) networks, both in terms of computing architecture and reconstruction algorithms. The approach is novel since, unlike most of the literature dealing with energy efficient gathering of the CS measurements, we focus on the energy efficiency of the signal reconstruction stage given the CS measurements. As a first novel contribution, we present an analysis of the energy consumption within the IoT network under two computing architectures. In the first one, reconstruction takes place within the IoT network and the reconstructed data are encoded and transmitted out of the IoT network; in the second one, all the CS measurements are forwarded to off-network devices for reconstruction and storage, i.e., reconstruction is off-loaded. Our analysis shows that the two architectures significantly differ in terms of consumed energy, and it outlines a theoretically motivated criterion to select a green CS reconstruction computing architecture. Specifically, we present a suitable decision function to determine which architecture outperforms the other in terms of energy efficiency. The presented decision function depends on a few IoT network features, such as the network size, the sink connectivity, and other systems’ parameters. As a second novel contribution, we show how to overcome classical performance comparison of different CS reconstruction algorithms usually carried out w.r.t. the achieved accuracy. Specifically, we consider the consumed energy and analyze the energy vs. accuracy trade-off. The herein presented approach, jointly considering signal processing and IoT network issues, is a relevant contribution for designing green compressive sampling architectures in IoT networks
A Network Coding Based Routing Protocol for Underwater Sensor Networks
Due to the particularities of the underwater environment, some negative factors will seriously interfere with data transmission rates, reliability of data communication, communication range, and network throughput and energy consumption of underwater sensor networks (UWSNs). Thus, full consideration of node energy savings, while maintaining a quick, correct and effective data transmission, extending the network life cycle are essential when routing protocols for underwater sensor networks are studied. In this paper, we have proposed a novel routing algorithm for UWSNs. To increase energy consumption efficiency and extend network lifetime, we propose a time-slot based routing algorithm (TSR).We designed a probability balanced mechanism and applied it to TSR. The theory of network coding is introduced to TSBR to meet the requirement of further reducing node energy consumption and extending network lifetime. Hence, time-slot based balanced network coding (TSBNC) comes into being. We evaluated the proposed time-slot based balancing routing algorithm and compared it with other classical underwater routing protocols. The simulation results show that the proposed protocol can reduce the probability of node conflicts, shorten the process of routing construction, balance energy consumption of each node and effectively prolong the network lifetime
Progressively communicating rich telemetry from autonomous underwater vehicles via relays
Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution June 2012As analysis of imagery and environmental data plays a greater role in mission construction
and execution, there is an increasing need for autonomous marine vehicles
to transmit this data to the surface. Without access to the data acquired by a
vehicle, surface operators cannot fully understand the state of the mission. Communicating
imagery and high-resolution sensor readings to surface observers remains
a significant challenge – as a result, current telemetry from free-roaming
autonomous marine vehicles remains limited to ‘heartbeat’ status messages, with
minimal scientific data available until after recovery. Increasing the challenge, longdistance
communication may require relaying data across multiple acoustic hops
between vehicles, yet fixed infrastructure is not always appropriate or possible.
In this thesis I present an analysis of the unique considerations facing telemetry
systems for free-roaming Autonomous Underwater Vehicles (AUVs) used in exploration.
These considerations include high-cost vehicle nodes with persistent storage
and significant computation capabilities, combined with human surface operators
monitoring each node. I then propose mechanisms for interactive, progressive
communication of data across multiple acoustic hops. These mechanisms include
wavelet-based embedded coding methods, and a novel image compression scheme
based on texture classification and synthesis. The specific characteristics of underwater
communication channels, including high latency, intermittent communication,
the lack of instantaneous end-to-end connectivity, and a broadcast medium,
inform these proposals. Human feedback is incorporated by allowing operators to
identify segments of data thatwarrant higher quality refinement, ensuring efficient
use of limited throughput. I then analyze the performance of these mechanisms
relative to current practices.
Finally, I present CAPTURE, a telemetry architecture that builds on this analysis.
CAPTURE draws on advances in compression and delay tolerant networking to
enable progressive transmission of scientific data, including imagery, across multiple acoustic hops. In concert with a physical layer, CAPTURE provides an endto-
end networking solution for communicating science data from autonomous marine
vehicles. Automatically selected imagery, sonar, and time-series sensor data
are progressively transmitted across multiple hops to surface operators. Human
operators can request arbitrarily high-quality refinement of any resource, up to an
error-free reconstruction. The components of this system are then demonstrated
through three field trials in diverse environments on SeaBED, OceanServer and
Bluefin AUVs, each in different software architectures.Thanks to the National Science Foundation, and the
National Oceanic and Atmospheric Administration for
their funding of my education and this work
Energy Efficiency in Communications and Networks
The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure
- …