Multiprocessor System-on-Chips based Wireless Sensor Network Energy Optimization

Wireless Sensor Network (WSN) is an integrated part of the Internet-of-Things (IoT) used to monitor the physical or environmental conditions without human intervention. In WSN one of the major challenges is energy consumption reduction both at the sensor nodes and network levels. High energy consumption not only causes an increased carbon footprint but also limits the lifetime (LT) of the network. Network-on-Chip (NoC) based Multiprocessor System-on-Chips (MPSoCs) are becoming the de-facto computing platform for computationally extensive real-time applications in IoT due to their high performance and exceptional quality-of-service. In this thesis a task scheduling problem is investigated using MPSoCs architecture for tasks with precedence and deadline constraints in order to minimize the processing energy consumption while guaranteeing the timing constraints. Moreover, energy-aware nodes clustering is also performed to reduce the transmission energy consumption of the sensor nodes. Three distinct problems for energy optimization are investigated given as follows: First, a contention-aware energy-efficient static scheduling using NoC based heterogeneous MPSoC is performed for real-time tasks with an individual deadline and precedence constraints. An offline meta-heuristic based contention-aware energy-efficient task scheduling is developed that performs task ordering, mapping, and voltage assignment in an integrated manner. Compared to state-of-the-art scheduling our proposed algorithm significantly improves the energy-efficiency. Second, an energy-aware scheduling is investigated for a set of tasks with precedence constraints deploying Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs. A novel population based algorithm called ARSH-FATI is developed that can dynamically switch between explorative and exploitative search modes at run-time. ARSH-FATI performance is superior to the existing task schedulers developed for homogeneous VFI-NoC-MPSoCs. Third, the transmission energy consumption of the sensor nodes in WSN is reduced by developing ARSH-FATI based Cluster Head Selection (ARSH-FATI-CHS) algorithm integrated with a heuristic called Novel Ranked Based Clustering (NRC). In cluster formation parameters such as residual energy, distance parameters, and workload on CHs are considered to improve LT of the network. The results prove that ARSH-FATI-CHS outperforms other state-of-the-art clustering algorithms in terms of LT.University of Derby, Derby, U

Energy-Aware Scheduling of Conditional Task Graphs on NoC-Based MPSoCs

We investigate the problem of scheduling a set of tasks with individual deadlines and conditional precedence constraints on a heterogeneous Network on Chip (NoC)-based Multi-Processor System-on-Chip (MPSoC) such that the total expected energy consumption of all the tasks is minimized, and propose a novel approach. Our approach consists of a scheduling heuristic for constructing a single unified schedule for all the tasks and assigning a frequency to each task and each communication assuming continuous frequencies, an Integer Linear Programming (ILP)-based algorithm and a polynomial time heuristic for assigning discrete frequencies and voltages to tasks and communications. We have performed experiments on 16 synthetic and 4 real-world benchmarks. The experimental results show that compared to the state-of-the-art approach, our approach using the ILP-based algorithm and our approach using the polynomial-time heuristic achieve average improvements of 31% and 20%, respectively, in terms of energy reduction

Heuristics for Routing and Spiral Run-time Task Mapping in NoC-based Heterogeneous MPSOCs

This paper describes a new Spiral Dynamic Task Mapping heuristic for mapping applications onto NoC-based Heterogeneous MPSoC. The heuristic proposed in this paper attempts to map the tasks of an applications that are most related to each other in spiral manner and to find the best possible path load that minimizes the communication overhead. In this context, we have realized a simulation environment for experimental evaluations to map applications with varying number of tasks onto an 8x8 NoC-based Heterogeneous MPSoCs platform, we demonstrate that the new mapping heuristics with the new modified dijkstra routing algorithm proposed are capable of reducing the total execution time and energy consumption of applications when compared to state-of the-art run-time mapping heuristics reported in the literature

Mapeo estático y dinámico de tareas en sistemas multiprocesador, basados en redes en circuito integrado

RESUMEN: Las redes en circuito integrado (NoC) representan un importante paradigma de uso creciente para los sistemas multiprocesador en circuito integrado (MPSoC), debido a su flexibilidad y escalabilidad. Las estrategias de tolerancia a fallos han venido adquiriendo importancia, a medida que los procesos de manufactura incursionan en dimensiones por debajo del micrómetro y la complejidad de los diseños aumenta. Este artículo describe un algoritmo de aprendizaje incremental basado en población (PBIL), orientado a optimizar el proceso de mapeo en tiempo de diseño, así como a encontrar soluciones de mapeo óptimas en tiempo de ejecución, para hacer frente a fallos de único nodo en la red. En ambos casos, los objetivos de optimización corresponden al tiempo de ejecución de las aplicaciones y al ancho de banda pico que aparece en la red. Las simulaciones se basaron en un algoritmo de ruteo XY determinístico, operando sobre una topología de malla 2D para la NoC. Los resultados obtenidos son prometedores. El algoritmo propuesto exhibe un desempeño superior a otras técnicas reportadas cuando el tamaño del problema aumenta.ABSTARCT: Due to its scalability and flexibility, Network-on-Chip (NoC) is a growing and promising communication paradigm for Multiprocessor System-on-Chip (MPSoC) design. As the manufacturing process scales down to the deep submicron domain and the complexity of the system increases, fault-tolerant design strategies are gaining increased relevance. This paper exhibits the use of a Population-Based Incremental Learning (PBIL) algorithm aimed at finding the best mapping solutions at design time, as well as to finding the optimal remapping solution, in presence of single-node failures on the NoC. The optimization objectives in both cases are the application completion time and the network's peak bandwidth. A deterministic XY routing algorithm was used in order to simulate the traffic conditions in the network which has a 2D mesh topology. Obtained results are promising. The proposed algorithm exhibits a better performance, when compared with other reported approaches, as the problem size increases

Framework for Simulation of Heterogeneous MpSoC for Design Space Exploration

Due to the ever-growing requirements in high performance data computation, multiprocessor systems have been proposed to solve the bottlenecks in uniprocessor systems. Developing efficient multiprocessor systems requires effective exploration of design choices like application scheduling, mapping, and architecture design. Also, fault tolerance in multiprocessors needs to be addressed. With the advent of nanometer-process technology for chip manufacturing, realization of multiprocessors on SoC (MpSoC) is an active field of research. Developing efficient low power, fault-tolerant task scheduling, and mapping techniques for MpSoCs require optimized algorithms that consider the various scenarios inherent in multiprocessor environments. Therefore there exists a need to develop a simulation framework to explore and evaluate new algorithms on multiprocessor systems. This work proposes a modular framework for the exploration and evaluation of various design algorithms for MpSoC system. This work also proposes new multiprocessor task scheduling and mapping algorithms for MpSoCs. These algorithms are evaluated using the developed simulation framework. The paper also proposes a dynamic fault-tolerant (FT) scheduling and mapping algorithm for robust application processing. The proposed algorithms consider optimizing the power as one of the design constraints. The framework for a heterogeneous multiprocessor simulation was developed using SystemC/C++ language. Various design variations were implemented and evaluated using standard task graphs. Performance evaluation metrics are evaluated and discussed for various design scenarios

A Survey and Comparative Study of Hard and Soft Real-time Dynamic Resource Allocation Strategies for Multi/Many-core Systems

Multi-/many-core systems are envisioned to satisfy the ever-increasing performance requirements of complex applications in various domains such as embedded and high-performance computing. Such systems need to cater to increasingly dynamic workloads, requiring efficient dynamic resource allocation strategies to satisfy hard or soft real-time constraints. This article provides an extensive survey of hard and soft real-time dynamic resource allocation strategies proposed since the mid-1990s and highlights the emerging trends for multi-/many-core systems. The survey covers a taxonomy of the resource allocation strategies and considers their various optimization objectives, which have been used to provide comprehensive comparison. The strategies employ various principles, such as market and biological concepts, to perform the optimizations. The trend followed by the resource allocation strategies, open research challenges, and likely emerging research directions have also been provided

A survey on scheduling and mapping techniques in 3D Network-on-chip

Network-on-Chips (NoCs) have been widely employed in the design of multiprocessor system-on-chips (MPSoCs) as a scalable communication solution. NoCs enable communications between on-chip Intellectual Property (IP) cores and allow those cores to achieve higher performance by outsourcing their communication tasks. Mapping and Scheduling methodologies are key elements in assigning application tasks, allocating the tasks to the IPs, and organising communication among them to achieve some specified objectives. The goal of this paper is to present a detailed state-of-the-art of research in the field of mapping and scheduling of applications on 3D NoC, classifying the works based on several dimensions and giving some potential research directions

Energy-efficient Static Task Scheduling on VFI based NoC-HMPSoCs for Intelligent Edge Devices in Cyber-Physical Systems

The interlinked processing units in the modern Cyber-Physical Systems (CPS) creates a large network of connected computing embedded systems. Network-on-Chip (NoC) based multiprocessor system-on-chip (MPSoC) architecture is becoming a de-facto computing platform for real-time applications due to its higher performance and Quality-of-Service (QoS). The number of processors has increased significantly on the multiprocessor systems in CPS therefore, Voltage Frequency Island (VFI) recently adopted for effective energy management mechanism in the large scale multiprocessor chip designs. In this paper, we investigate energy and contention-aware static scheduling for tasks with precedence and deadline constraints on intelligent edge devices deploying heterogeneous VFI based NoC-MPSoCs with DVFS-enabled processors. Unlike the existing population-based optimization algorithms, we propose a novel population-based algorithm called ARSH-FATI that can dynamically switch between explorative and exploitative search modes at run-time. Our static scheduler ARHS-FATI collectively performs task mapping, scheduling, and voltage scaling. Consequently, its performance is superior to the existing state-of-the-art approach proposed for homogeneous VFI based NoC-MPSoCs. We also developed a communication contention-aware Earliest Edge Consistent Deadline First (EECDF) scheduling algorithm and gradient descent inspired voltage scaling algorithm called Energy Gradient Decent (EGD). We have introduced a notion of Energy Gradient (EG) that guides EGD in its search for islands voltage settings and minimize the total energy consumption. We conducted the experiments on 8 real benchmarks adopted from Embedded Systems Synthesis Benchmarks (E3S). Our static scheduling approach ARSH-FATI outperformed state-of-the-art technique and achieved an average energy-efficiency of ~ 24% and ~ 30% over CA-TMES-Search and CA-TMES-Quick respectively