A low-power circuit for piezoelectric vibration control by synchronized switching on voltage sources

In the paper, a vibration damping system powered by harvested energy with implementation of the so-called SSDV (synchronized switch damping on voltage source) technique is designed and investigated. In the semi-passive approach, the piezoelectric element is intermittently switched from open-circuit to specific impedance synchronously with the structural vibration. Due to this switching procedure, a phase difference appears between the strain induced by vibration and the resulting voltage, thus creating energy dissipation. By supplying the energy collected from the piezoelectric materials to the switching circuit, a new low-power device using the SSDV technique is proposed. Compared with the original self-powered SSDI (synchronized switch damping on inductor), such a device can significantly improve its performance of vibration control. Its effectiveness in the single-mode resonant damping of a composite beam is validated by the experimental results.Comment: 11 page

Accurate supercapacitor modeling for energy-harvesting wireless sensor nodes

Supercapacitors are often used in energy-harvesting wireless sensor nodes (EH-WSNs) to store harvested energy. Until now, research into the use of supercapacitors in EH-WSNs has considered them to be ideal or over-simplified, with non-ideal behavior attributed to substantial leakage currents. In this brief, we show that observations previously attributed to leakage are predominantly due to redistribution of charge inside the supercapacitor. We confirm this hypothesis through the development of a circuit-based model which accurately represents non-ideal behavior. The model correlates well with practical validations representing the operation of an EH-WSN, and allows behavior to be simulated over long periods

Supercapacitor leakage in energy-harvesting sensor nodes: fact or fiction?

As interest in energy-harvesting sensor nodes continues to grow, the use of supercapacitors as energy stores or buffers is gaining popularity. The reasons for their use are numerous, and include their high power density, simple interfacing requirements, simpler measurement of state-of-charge, and a greater number of charging cycles than secondary batteries. However, supercapacitor energy densities are orders of magnitude lower. Furthermore, they have been reported to exhibit significant leakage, and this has been shown to increase exponentially with terminal voltage (and hence stored energy). This observation has resulted in a number of algorithms, designs and methods being proposed for effective operation of supercapacitor-based energy-harvesting sensor nodes. In this paper, it is argued that traditional ‘leakage’ is not as significant as has commonly been suggested. Instead, what is observed as leakage is in fact predominantly due to internal charge redistribution. As a result, it is suggested that different approaches are required in order to effectively utilize supercapacitors in energy-harvesting sensor nodes

Dynamic Voltage Scaling Techniques for Energy Efficient Synchronized Sensor Network Design

Building energy-efficient systems is one of the principal challenges in wireless sensor networks. Dynamic voltage scaling (DVS), a technique to reduce energy consumption by varying the CPU frequency on the fly, has been widely used in other settings to accomplish this goal. In this paper, we show that changing the CPU frequency can affect timekeeping functionality of some sensor platforms. This phenomenon can cause an unacceptable loss of time synchronization in networks that require tight synchrony over extended periods, thus preventing all existing DVS techniques from being applied. We present a method for reducing energy consumption in sensor networks via DVS, while minimizing the impact of CPU frequency switching on time synchronization. The system is implemented and evaluated on a network of 11 Imote2 sensors mounted on a truss bridge and running a high-fidelity continuous structural health monitoring application. Experimental measurements confirm that the algorithm significantly reduces network energy consumption over the same network that does not use DVS, while requiring significantly fewer re-synchronization actions than a classic DVS algorithm.unpublishedis peer reviewe

Methods and Tools for Battery-free Wireless Networks

Embedding small wireless sensors into the environment allows for monitoring physical processes with high spatio-temporal resolutions. Today, these devices are equipped with a battery to supply them with power. Despite technological advances, the high maintenance cost and environmental impact of batteries prevent the widespread adoption of wireless sensors. Battery-free devices that store energy harvested from light, vibrations, and other ambient sources in a capacitor promise to overcome the drawbacks of (rechargeable) batteries, such as bulkiness, wear-out and toxicity. Because of low energy input and low storage capacity, battery-free devices operate intermittently; they are forced to remain inactive for most of the time charging their capacitor before being able to operate for a short time. While it is known how to deal with intermittency on a single device, the coordination and communication among groups of multiple battery-free devices remain largely unexplored. For the first time, the present thesis addresses this problem by proposing new methods and tools to investigate and overcome several fundamental challenges

Design and Development of an RF Energy Harvesting Wireless Sensor Node (EH-WSN) for Aerospace Applications

AbstractNumerous applications of wireless sensor networks are constrained by the limited battery power of the sensors. The power consumption of processors and microcontrollers could be scaled down dramatically with the new advances in microelectronics. This reduction gives rise to the possibility of energy harvesting sources to power wireless sensor nodes. In this paper a summary is given of our ongoing research work on RF Energy Harvesting Wireless Sensor Node (EH-WSN) which can plug-in to the already developed Wireless Instrumentation System (WIS) for aerospace applications. Present WSN's which are powered from battery have limited operational lifetime. While energy harvesting has the potential to enable near-perpetual system operation, design of which is a complex trade-off due to the interaction of numerous factors such as the characteristics of the energy source, power supply requirements, power management futures, WSN application behaviour, chemistry and capacity of batteries used etc. In this work, we have identified a suitable power harvesting cum battery management scheme which harvests power consistently and deterministically from a secondary RF source which can be used even in harsh real-time applications. Using a RF power harvesting receiver IC and a compact power management cum storage circuit, we establish the test bed and conduct a series of experiments to verify the effectiveness of the proposed scheme. We have demonstrated continuous operation of the sensor node at an operating distance of 2 meters from the RF power source for a data rate of 240 sps. This is achieved by using special synchronized MAC protocol, low power techniques, usage of low leakage components and systematic coding of the micro controller firmware. This paper provides an insight into how various power reduction techniques can be used and orchestrated such that satisfactory performance can be achieved for a given energy budget