Performance Evaluation of Energy Efficient Optimized Routing Protocol for WBANs Using PSO Protocol

A Wireless Body Area Network (WBAN) is a network that may be worn on the human body or implanted in the human body to transmit data, audio, and video in real-time to assess how vital organs are performing. A WBAN may be either an inter-WBAN or an intra-WBAN network. Intra-WBAN communication occurs when the various body sensors can share information. This is known as inter-WBAN communication, which occurs when two or more WBANs can exchange data with one another. One difficulty involves getting data traffic from wireless sensor nodes to the gateway with as little wasted energy, dropped packets, and downtime as possible. In this paper, the WBAN protocols have been compared with WBAN under Particle Swarm Optimization (PSO), and the performance of various parameters has been analysed for different simulation areas. The WBAN under the PSO protocol reduces the energy consumption by 43.2% against the SIMPLE protocoldue to the effective selection of forwarding nodes based on PSO optimization. In addition to that the experimental WBAN testbed is conducted in indoor environment to study the performance of the routing metrics towards energy and packet reception.

A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

EOCC-TARA for Software Defined WBAN

Wireless Body Area Network (WBAN) is a promising cost-effective technology for the privacy confined military applications and healthcare applications like remote health monitoring, telemedicine, and e-health services. The use of a Software-Defined Network (SDN) approach improves the control and management processes of the complex structured WBANs and also provides higher flexibility and dynamic network structure. To seamless routing performance in SDN-based WBAN, the energy-efficiency problems must be tackled effectively. The main contribution of this paper is to develop a novel Energy Optimized Congestion Control based on Temperature Aware Routing Algorithm (EOCC-TARA) using Enhanced Multi-objective Spider Monkey Optimization (EMSMO) for SDN-based WBAN. This algorithm overcomes the vital challenges, namely energy-efficiency, congestion-free communication, and reducing adverse thermal effects in WBAN routing. First, the proposed EOCC-TARA routing algorithm considers the effects of temperature due to the thermal dissipation of sensor nodes and formulates a strategy to adaptively select the forwarding nodes based on temperature and energy. Then the congestion avoidance concept is added with the energy-efficiency, link reliability, and path loss for modeling the cost function based on which the EMSMO provides the optimal routing. Simulations were performed, and the evaluation results showed that the proposed EOCC-TARA routing algorithm has superior performance than the traditional routing approaches in terms of energy consumption, network lifetime, throughput, temperature control, congestion overhead, delay, and successful transmission rate

Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey

Wireless sensor networks (WSNs) consist of autonomous and resource-limited devices. The devices cooperate to monitor one or more physical phenomena within an area of interest. WSNs operate as stochastic systems because of randomness in the monitored environments. For long service time and low maintenance cost, WSNs require adaptive and robust methods to address data exchange, topology formulation, resource and power optimization, sensing coverage and object detection, and security challenges. In these problems, sensor nodes are to make optimized decisions from a set of accessible strategies to achieve design goals. This survey reviews numerous applications of the Markov decision process (MDP) framework, a powerful decision-making tool to develop adaptive algorithms and protocols for WSNs. Furthermore, various solution methods are discussed and compared to serve as a guide for using MDPs in WSNs

A Survey on Various Congestion Control Techniques in Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are made up of small battery-powered sensors that can sense and monitor a variety of environmental conditions. These devices are self-contained and fault tolerant. The majority of WSNs are built to perform data collection tasks. These data are gathered and then sent to the sink node. Small packets are sent towards the sink node in such cases, and as a result, the areas near the sink node become congested, becoming the bottleneck of the entire network. In this paper, a survey of existing techniques or methods for detecting and eliminating congestions is conducted. Finally, a comparison in the form of a table based on various matrices is presented

Priority based energy efficient hybrid cluster routing protocol for underwater wireless sensor network

A little change in the environment that goes unnoticed in an underwater communication network might lead to calamity. A little alteration in the environment must also be adequately analyzed in order to deal with a potential crisis. A priority-based routing protocol is required to ensure that the vital data perceived by the sensor about the environment changes. The priority-based routing system guarantees that vital data packets are delivered at a quicker pace to the destination or base station for further processing. In this work, we present a priority-based routing protocol based on the energy efficient hybrid cluster routing protocol (EEHRCP) algorithm. The suggested approach keeps two distinct queues for lower and higher priority data packets. In order to ensure that these packets get at their destination without any information loss and at a quicker rate, all of the crucial sensed data is passed through a higher priority queue. Test findings show that the suggested technique increases throughput, delivery percentage, and reduces latency for the crucial data packets

Multi-constrained mechanism for intra-body area network quality-of-service aware routing in wireless body sensor networks

Wireless Body Sensor Networks (WBSNs) have witnessed tremendous research interests in a wide range of medical and non-medical fields. In the delaysensitive application scenarios, the critical data packets are highly delay-sensitive which require some Quality-of-Service (QoS) to reach the intended destinations. The categorization of data packets and selection of poor links may have detrimental impacts on overall performance of the network. In WBSN, various biosensors transmit the sensed data towards a destination for further analysis. However, for an efficient data transmission, it is very important to transmit the sensed data towards the base station by satisfying the QoS multi-constrained requirements of the healthcare applications in terms of least end-to-end delay and high reliability, throughput, Packet Delivery Ratio (PDR), and route stability performance. Most of the existing WBSN routing schemes consider traffic prioritization to solve the slot allocation problem. Consequently, the data transmission may face high delays, packet losses, retransmissions, lack of bandwidth, and insufficient buffer space. On the other hand, an end-to-end route is discovered either using a single or composite metric for the data transmission. Thus, it affects the delivery of the critical data through a less privileged manner. Furthermore, a conventional route repair method is considered for the reporting of broken links which does not include surrounding interference. As such, this thesis presents the Multi-constrained mechanism for Intra- Body Area Network QoS aware routing (MIQoS) with Low Latency Traffic Prioritization (LLTP), Optimized Route Discovery (ORD), and Interference Adaptive Route Repair (IARR) schemes for the healthcare application of WBSN with an objective of improving performance in terms of end-to-end delay, route stability, and throughput. The proposed LLTP scheme considers various priority queues with an optimized scheduling mechanism that dynamically identifies and prioritizes the critical data traffic in an emergency situation to enhance the critical data transmission. Consequently, this will avoid unnecessary queuing delay. The ORD scheme incorporates an improved and multi-facet routing metric, Link Quality Metric (LQM) optimizes the route selection by considering link delay, link delivery ratio, and link interference ratio. The IARR scheme identifies the links experiencing transmission issues due to channel interference and makes a coherent decision about route breakage based on the long term link performance to avoid unnecessary route discovery notifications. The simulation results verified the improved performance in terms of reducing the end-to-end delay by 29%, increasing the throughput by 22% and route stability by 26% as compared to the existing routing schemes such as TTRP, PA-AODV and standard AODV. In conclusion, MIQoS proves to be a suitable routing mechanism for a wide range of interesting applications of WBSN that require fast, reliable and multi-hop communication in heavily loaded network traffic scenarios

QoS Challenges in wireless sensor networked robotics

Wireless sensor networks and mobile robotics are two hot research topics. Integrating them leads to a wide range of new applications in many different environments such as terrestrial, underwater, underground and aerial. Where sensor networks are mainly used for large-scale monitoring and control, mobile robotics are used for performing fine-scale actions and automation. Network heterogeneity together with stringent Quality of Service (QoS) demands from applications such as voice and video make QoS support very challenging. Therefore, this paper investigates the QoS challenges in wireless sensor networked robotics and presents a novel QoS framework as solution to cope with these challenges