868 research outputs found
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
INTERFERENCE MANAGEMENT IN LTE SYSTEM AND BEYOUND
The key challenges to high throughput in cellular wireless communication system are interference, mobility and bandwidth limitation. Mobility has never been a problem until recently, bandwidth has been constantly improved upon through the evolutions in cellular wireless communication system but interference has been a constant limitation to any improvement that may have resulted from such evolution. The fundamental challenge to a system designer or a researcher is how to achieve high data rate in motion (high speed) in a cellular system that is intrinsically interference-limited.
Multi-antenna is the solution to data on the move and the capacity of multi-antenna system has been demonstrated to increase proportionally with increase in the number of antennas at both transmitter and receiver for point-to-point communications and multi-user environment. However, the capacity gain in both uplink and downlink is limited in a multi-user environment like cellular system by interference, the number of antennas at the base station, complexity and space constraint particularly for a mobile terminal.
This challenge in the downlink provided the motivation to investigate successive interference cancellation (SIC) as an interference management tool LTE system and beyond. The Simulation revealed that ordered successive interference (OSIC) out performs non-ordered successive interference cancellation (NSIC) and the additional complexity is justified based on the associated gain in BER performance of OSIC. The major drawback of OSIC is that it is not efficient in network environment employing power control or power allocation. Additional interference management techniques will be required to fully manage the interference.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Optimization of Spectrum Management in Massive Array Antenna Systems with MIMO
Fifth generation (5G), is being considered as a revolutionary technology in the telecommunication
domain whose the challenges are mainly to achieve signal quality and great ability to
work with free spectrum in the millimetre waves. Besides, other important innovations are the
introduction of a more current architecture and the use of multiple antennas in transmission
and reception. Digital communication using multiple input and multiple output (MIMO) wireless
links has recently emerged as one of the most significant technical advances in modern communications.
MIMO technology is able to offer a large increase in the capacity of these systems,
without requiring a considerable increase in bandwidth or power required for transmission.
This dissertation presents an overview of theoretical concepts of MIMO systems. With such a
system a spatial diversity gain can be obtained by using space-time codes, which simultaneously
exploit the spatial domain and the time domain. SISO, SIMO and MISO systems are differentiated
by their channel capacity and their configuration in relation to the number of antennas in the
transmitter/receiver. To verify the effectiveness of the MIMO systems a comparison between the
capacity of SISO and MIMO systems has been performed using the Shannon’s principles. In the
MIMO system some variations in the number of antennas arrays have been considered, and the
superiority of transmission gains of the MIMO systems have been demonstrated. Combined with
millimetre waves (mmWaves) technology, massive MIMO systems, where the number of antennas
in the base station and the number of users are large, is a promising solution.
SDR implementations have been performed considering a platform with Matlab code applied to
MIMO 2x2 Radio and Universal Software Peripheral Radio (USRP). A detailed study was initially
conducted to analyze the architecture of the USRP. Complex structures of MIMO systems can
be simplified by using mathematical methods implemented in Matlab for the synchronization of
the USRP in the receiver side. SISO transmission and reception techniques have been considered
to refine the synchronization (with 16-QAM), thus facilitating the future implementation of the
MIMO system. OpenAirInterface has been considered for 4G and 5G implementations of actual
mobile radio communication systems. Together with the practical MIMO, this type of solution is
the starting point for future hardware building blocks involving massive MIMO systems.A quinta geração (5G) está sendo considerada uma tecnologia revolucionária no setor de telecomunicações,
cujos desafios são principalmente a obtenção de qualidade de sinal e grande capacidade
de trabalhar com espectro livre nas ondas milimétricas. Além disso, outras inovações
importantes são a introdução de uma arquitetura mais atual e o uso de múltiplas antenas em
transmissão e recepção. A comunicação digital usando ligaçõe sem fio de múltiplas entradas e
múltiplas saídas (MIMO) emergiu recentemente como um dos avanços técnicos mais significativos
nas comunicações modernas. A tecnologia MIMO é capaz de oferecer um elevado aumento na
capacidade, sem exigir um aumento considerável na largura de banda ou potência transmitida.
Esta dissertação apresenta uma visão geral dos conceitos teóricos dos sistemas MIMO. Com esses
sistemas, um ganho de diversidade espacial pode ser obtido utilizando códigos espaço-tempo
reais. Os sistemas SISO, SIMO e MISO são diferenciados pela capacidade de seus canais e a sua
configuração em relação ao número de antenas no emissor/receptor. Para verificar a eficiência
dos sistemas MIMO, realizou-se uma comparação entre a capacidade dos sistemas SISO e MIMO
utilizado os princípios de Shannon. Nos sistemas MIMO condecideraram-se algumas variações no
número de agregados de antenas, e a superioridade dos ganhos de transmissão dos sistemas MIMO
foi demonstrada. Combinado com a tecnologia de ondas milimétricas (mmWaves), os sistemas
massivos MIMO, onde o número de antenas na estação base e o número de usuários são grandes,
são uma solução promissora.
As implementações do SDR foram realizadas considerando uma plataforma com código Matlab
aplicado aos rádios MIMO 2x2 e Universal Software Peripheral Radio (USRP). Um estudo detalhado
foi inicialmente conduzido para analisar a arquitetura da USRP. Estruturas complexas de sistemas
MIMO podem ser simplificadas usando métodos matemáticos implementados no Matlab para a
sincronização do USRP no lado do receptor. Consideraram-se técnicas de transmissão e recepção
SISO para refinar a sincronização (com 16-QAM), facilitando assim a implementação futura do
sistema MIMO . Considerou-se o OpenAirInterface para implementações 4G e 5G de sistemas
reais de comunicações móveis. Juntamente com o MIMO na pratica, este tipo de solução é
o ponto de partida para futuros blocos de construção de hardware envolvendo sistemas MIMO
massivos
- …