Multi-cell interference management in In-band D2D communication under LTE-A network

Device-to-Device (D2D) communication is an active research area. As a part of this active research area, Device-to-Device (D2D) communication is largely exploited in Out-band non-cellular technologies, such as, Bluetooth or Wi-Fi network. However, it has not been fully incorporated into existing cellular networks. Interference management is the main challenge of this technology as it generates both intra and inter-cell interference resulting in severe network performance degradation. eNodeBs with high transmit power usually affects D2D user equipments (UEs) with high interference. It usually incurs severe interference to the cellular UEs and to the base station (eNB). The scenario becomes more critical in case of multi-cell environment, which is the main research focus in this paper. In order to encourage and increase frequent use of D2D communications, some changes in the network configuration are required for today’s networking scenario. Flexible multi-cell D2D communication is required to reduce the network load. Interference management techniques are necessary in parallel to make the communication smooth, efficient and effective.This paper reviews multi-cell interference in In-Band D2D communications and investigates interference mitigation techniques in scenarios where two or more similar or different devices under same eNB or from two different eNBs can be connected as a D2D pair without compromising user experience and quality of service standard. These issues cannot be guaranteed by the current applications operated on unlicensed frequency band. The research also addresses the following related issues: mode selection, resource allocation (both for cellular and D2D environment), power control (both for eNB and D2D pair), and flexible frequency allocation techniques. The research aims to look at other issues, such as, achieving high SINR, improved system capacity, better throughput and transmission rate

Optimal Video Streaming in Dense 5G Networks With D2D Communications

© 2017 IEEE. Mobile video traffic and mobile devices have now outpaced other data traffic and fixed devices. Global service providers are attempting to propose new mobile infrastructures and solutions for high performance of video streaming services, i.e., high quality of experience (QoE) at high resource efficiency. Although device-to-device (D2D) communications have been an emerging technique that is anticipated to provide a massive number of mobile users with advanced services in 5G networks, the management of resource and co-channel interference between D2D pairs, i.e., helper-requester pairs, and cellular users (CUs) is challenging. In this paper, we design an optimal rate allocation and description distribution for high performance video streaming, particularly, achieving high QoE at high energy efficiency while limiting co-channel interference over D2D communications in 5G networks. To this end, we allocate optimal encoding rates to different layers of a video segment and then packetize the video segment into multiple descriptions with embedded forward error correction before transmission. Simultaneously, the optimal numbers of descriptions are distributed to D2D helpers and base stations in a cooperative scheme for transmitting to the D2D requesters. The optimal results are efficiently in correspondence with intra-popularity of different segments of a video characterized by requesters' behavior, characteristic of lossy wireless channels, channel state information of D2D requesters, and constraints on remaining energy of D2D helpers and target signal to interference plus noise ratio of CUs. Simulation results demonstrate the benefits of our proposed solution in terms of high performance video streaming

Transceiver design and multi-hop D2D for UAV IoT coverage in disasters

When natural disasters strike, the coverage for Internet of Things (IoT) may be severely destroyed, due to the damaged communications infrastructure. Unmanned aerial vehicles (UAVs) can be exploited as flying base stations to provide emergency coverage for IoT, due to its mobility and flexibility. In this paper, we propose multi-antenna transceiver design and multi-hop device-to-device (D2D) communication to guarantee the reliable transmission and extend the UAV coverage for IoT in disasters. Firstly, multi-hop D2D links are established to extend the coverage of UAV emergency networks due to the constrained transmit power of the UAV. In particular, a shortest-path-routing algorithm is proposed to establish the D2D links rapidly with minimum nodes. The closed-form solutions for the number of hops and the outage probability are derived for the uplink and downlink. Secondly, the transceiver designs for the UAV uplink and downlink are studied to optimize the performance of UAV transmission. Due to the non-convexity of the problem, they are first transformed into convex ones and then, low-complexity algorithms are proposed to solve them efficiently. Simulation results show the performance improvement in the throughput and outage probability by the proposed schemes for UAV wireless coverage of IoT in disasters

Resource Allocation for Device-to-Device Communications in Multi-Cell Multi-Band Heterogeneous Cellular Networks

Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave) communications are considered as a promising technology for the fifth generation mobile networks. Mm-wave has the potential to provide multiple gigabit data rate due to the broad spectrum. Unfortunately, additional free space path loss is also caused by the high carrier frequency. On the other hand, mm-wave signals are sensitive to obstacles and more vulnerable to blocking effects. To address this issue, highly directional narrow beams are utilized in mm-wave networks. Additionally, device-to-device (D2D) users make full use of their proximity and share uplink spectrum resources in HCNs to increase the spectrum efficiency and network capacity. Towards the caused complex interferences, the combination of D2D-enabled HCNs with small cells densely deployed and mm-wave communications poses a big challenge to the resource allocation problems. In this paper, we formulate the optimization problem of D2D communication spectrum resource allocation among multiple micro-wave bands and multiple mm-wave bands in HCNs. Then, considering the totally different propagation conditions on the two bands, a heuristic algorithm is proposed to maximize the system transmission rate and approximate the solutions with sufficient accuracies. Compared with other practical schemes, we carry out extensive simulations with different system parameters, and demonstrate the superior performance of the proposed scheme. In addition, the optimality and complexity are simulated to further verify effectiveness and efficiency.Comment: 13 pages, 11 figures, IEEE Transactions on Vehicular Technolog