Low-power CMOS front-ends for wireless personal area networks

The potential of implementing subthreshold radio frequency circuits in deep sub-micron CMOS technology was investigated for developing low-power front-ends for wireless personal area network (WPAN) applications. It was found that the higher transconductance to bias current ratio in weak inversion could be exploited in developing low-power wireless front-ends, if circuit techniques are employed to mitigate the higher device noise in subthreshold region. The first fully integrated subthreshold low noise amplifier was demonstrated in the GHz frequency range requiring only 260 μW of power consumption. Novel subthreshold variable gain stages and down-conversion mixers were developed. A 2.4 GHz receiver, consuming 540 μW of power, was implemented using a new subthreshold mixer by replacing the conventional active low noise amplifier by a series-resonant passive network that provides both input matching and voltage amplification. The first fully monolithic subthreshold CMOS receiver was also implemented with integrated subthreshold quadrature LO (Local Oscillator) chain for 2.4 GHz WPAN applications. Subthreshold operation, passive voltage amplification, and various low-power circuit techniques such as current reuse, stacking, and differential cross coupling were combined to lower the total power consumption to 2.6 mW. Extremely compact resistive feedback CMOS low noise amplifiers were presented as a cost-effective alternative to narrow band LNAs using high-Q inductors. Techniques to improve linearity and reduce power consumption were presented. The combination of high linearity, low noise figure, high broadband gain, extremely small die area and low power consumption made the proposed LNA architecture a compelling choice for many wireless applications.Ph.D.Committee Chair: Laskar, Joy; Committee Member: Chakraborty, Sudipto; Committee Member: Chang, Jae Joon; Committee Member: Divan, Deepakraj; Committee Member: Kornegay, Kevin; Committee Member: Tentzeris, Emmanoui

On a Joint Physical Layer and Medium Access Control Sublayer Design for Efficient Wireless Sensor Networks and Applications

Wireless sensor networks (WSNs) are distributed networks comprising small sensing devices equipped with a processor, memory, power source, and often with the capability for short range wireless communication. These networks are used in various applications, and have created interest in WSN research and commercial uses, including industrial, scientific, household, military, medical and environmental domains. These initiatives have also been stimulated by the finalisation of the IEEE 802.15.4 standard, which defines the medium access control (MAC) and physical layer (PHY) for low-rate wireless personal area networks (LR-WPAN). Future applications may require large WSNs consisting of huge numbers of inexpensive wireless sensor nodes with limited resources (energy, bandwidth), operating in harsh environmental conditions. WSNs must perform reliably despite novel resource constraints including limited bandwidth, channel errors, and nodes that have limited operating energy. Improving resource utilisation and quality-of-service (QoS), in terms of reliable connectivity and energy efficiency, are major challenges in WSNs. Hence, the development of new WSN applications with severe resource constraints will require innovative solutions to overcome the above issues as well as improving the robustness of network components, and developing sustainable and cost effective implementation models. The main purpose of this research is to investigate methods for improving the performance of WSNs to maintain reliable network connectivity, scalability and energy efficiency. The study focuses on the IEEE 802.15.4 MAC/PHY layers and the carrier sense multiple access with collision avoidance (CSMA/CA) based networks. First, transmission power control (TPC) is investigated in multi and single-hop WSNs using typical hardware platform parameters via simulation and numerical analysis. A novel approach to testing TPC at the physical layer is developed, and results show that contrary to what has been reported from previous studies, in multi-hop networks TPC does not save energy. Next, the network initialization/self-configuration phase is addressed through investigation of the 802.15.4 MAC beacon interval setting and the number of associating nodes, in terms of association delay with the coordinator. The results raise doubt whether that the association energy consumption will outweigh the benefit of duty cycle power management for larger beacon intervals as the number of associating nodes increases. The third main contribution of this thesis is a new cross layer (PHY-MAC) design to improve network energy efficiency, reliability and scalability by minimising packet collisions due to hidden nodes. This is undertaken in response to findings in this thesis on the IEEE 802.15.4 MAC performance in the presence of hidden nodes. Specifically, simulation results show that it is the random backoff exponent that is of paramount importance for resolving collisions and not the number of times the channel is sensed before transmitting. However, the random backoff is ineffective in the presence of hidden nodes. The proposed design uses a new algorithm to increase the sensing coverage area, and therefore greatly reduces the chance of packet collisions due to hidden nodes. Moreover, the design uses a new dynamic transmission power control (TPC) to further reduce energy consumption and interference. The above proposed changes can smoothly coexist with the legacy 802.15.4 CSMA/CA. Finally, an improved two dimensional discrete time Markov chain model is proposed to capture the performance of the slotted 802.15.4 CSMA/CA. This model rectifies minor issues apparent in previous studies. The relationship derived for the successful transmission probability, throughput and average energy consumption, will provide better performance predictions. It will also offer greater insight into the strengths and weaknesses of the MAC operation, and possible enhancement opportunities. Overall, the work presented in this thesis provides several significant insights into WSN performance improvements with both existing protocols and newly designed protocols. Finally, some of the numerous challenges for future research are described

Bandwidth and Energy Consumption Tradeoff for IEEE 802.15.4 in Multihop Topologies

IEEE 802.15.4, Multi-hop,ZigBee,WSNwe analyze IEEE 802.15.4 mechanisms including node organization, MAC mechanisms, energy conservation, topology construction and node association. We detail how we should modify IEEE 802.15.4 to cope efficiently with multihop topologies, scheduling the transmissions. We quantify the impact of the cluster-tree algorithm on the network performances. We expose how the overall throughput can be improved with a novel cluster-tree construction algorithm defined formally as a Mixed Integer Linear Programming formulation. We quantify the impact of each parameter on the performances of IEEE 802.15.4. In particular, we present a self-configuration algorithm to dynamically adjust the Backoff Exponent so that the protocol always operates in optimal conditions

Prospectiva de seguridad de las redes de sensores inalámbricos

En las Redes de Sensores Inalámbricos (WSN), los nodos son vulnerables a los ataques de seguridad porque están instalados en un entorno difícil, con energía y memoria limitadas, baja capacidad de procesamiento y transmisión de difusión media; por lo tanto, identificar las amenazas, los retos y las soluciones de seguridad y privacidad es un tema candente hoy en día. En este artículo se analizan los trabajos de investigación que se han realizado sobre los mecanismos de seguridad para la protección de las WSN frente a amenazas y ataques, así como las tendencias que surgen en otros países junto con futuras líneas de investigación. Desde el punto de vista metodológico, este análisis se muestra a través de la visualización y estudio de trabajos indexados en bases de datos como IEEE, ACM, Scopus y Springer, con un rango de 7 años como ventana de observación, desde 2013 hasta 2019. Se obtuvieron un total de 4.728 publicaciones, con un alto índice de colaboración entre China e India. La investigación planteó desarrollos, como avances en los principios de seguridad y mecanismos de defensa, que han llevado al diseño de contramedidas en la detección de intrusiones. Por último, los resultados muestran el interés de la comunidad científica y empresarial por el uso de la inteligencia artificial y el aprendizaje automático (ML) para optimizar las medidas de rendimiento.In Wireless Sensor Networks (WSN), nodes are vulnerable to security attacks because they are installed in a harsh environment with limited power and memory, low processing power, and medium broadcast transmission. Therefore, identifying threats, challenges, and solutions of security and privacy is a talking topic today. This article analyzes the research work that has been carried out on the security mechanisms for the protection of WSN against threats and attacks, as well as the trends that emerge in other countries combined with future research lines. From the methodological point of view, this analysis is shown through the visualization and study of works indexed in databases such as IEEE, ACM, Scopus, and Springer, with a range of 7 years as an observation window, from 2013 to 2019. A total of 4,728 publications were obtained, with a high rate of collaboration between China and India. The research raised developments, such as advances in security principles and defense mechanisms, which have led to the design of countermeasures in intrusion detection. Finally, the results show the interest of the scientific and business community in the use of artificial intelligence and machine learning (ML) to optimize performance measurements

A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver

Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho

Location Aided Energy Balancing Strategy in Green Cellular Networks

Most cellular network communication strategies are focused on data traffic scenarios rather than energy balance and efficient utilization. Thus mobile users in hot cells may suffer from low throughput due to energy loading imbalance problem. In state of art cellular network technologies, relay stations extend cell coverage and enhance signal strength for mobile users. However, busy traffic makes the relay stations in hot area run out of energy quickly. In this paper, we propose an energy balancing strategy in which the mobile nodes are able to dynamically select and hand over to the relay station with the highest potential energy capacity to resume communication. Key to the strategy is that each relay station merely maintains two parameters that contains the trend of its previous energy consumption and then predicts its future quantity of energy, which is defined as the relay station potential energy capacity. Then each mobile node can select the relay station with the highest potential energy capacity. Simulations demonstrate that our approach significantly increase the aggregate throughput and the average life time of relay stations in cellular network environment.Comment: 6 pages, 5 figures. arXiv admin note: text overlap with arXiv:1108.5493 by other author

Characterization of 28 nm FDSOI MOS and application to the design of a low-power 2.4 GHz LNA

IoT is expected to connect billions of devices all over world in the next years, and in a near future, it is expected to use LR-WPAN in a wide variety of applications. Not all the devices will require of high performance but will require of low power hungry systems since most of them will be powered with a battery. Conventional CMOS technologies cannot cover these needs even scaling it to very small regimes, which appear other problems. Hence, new technologies are emerging to cover the needs of this devices. One promising technology is the UTBB FDSOI, which achieves good performance with very good energy efficiency. This project characterizes this technology to obtain a set of parameters of interest for analog/RF design. Finally, with the help of a low-power design methodology (gm/Id approach), a design of an ULP ULV LNA is performed to check the suitability of this technology for IoT

Modular Home Automation Systems for Senior Citizens

The aging of the population is one of the biggest challenges in our society. Citizens life expectancy is growing and the birth rate is decreasing. In long-term this is untenable. Thanks to the advance of technology we can try to help to reduce the impact of this problem. I introduce a brief work on Modular Home Automation Systems with energy efficiency adapted to nowadays lifestyle and technology. These systems make use of wireless communications instead of wired ones to minimize the invasion of new devices. Because of the characteristics of these systems, ZigBee suits perfectly. ZigBee is a specification made to provide low rate wireless communications. ZigBee networks make the communication more efficient and adaptive. To achieve a modular environment, we use some design patterns from Software Engineering ,which also improve the security and maintainability of the system. The system is also expandable and reliable among other capabilities

Relevance- and Aggregation-based Scheduling for Data Transmission in IEEE 802.15.4e IoT Networks

Master's thesis Information- and communication technology IKT590 - University of Agder 2017Internet of thing (IoT) is regarded as a new communicating paradigm with Internet connectivity enabling embedded devices to interact with each other on a global scale. IoT has the potential to become the largest producer of information because of a massive number of connected devices with diverse applications ranging from environmental monitoring, home, and building automation. This ubiquitous connectivity requires reliability, efficiency, and sustainability of access to information. As an enabling technology, wireless sensor networks (WSNs) have opened new opportunity with recent technological developments in making miniaturized smart connected devices. With an increase in the activity of these smart devices, there are challenges in maintaining their limited energy, lifetime, and reliability required for IoT applications. The reason is that these devices are mostly battery powered. In this respect, an insight into the activities of sensing devices produced by different vendors with interoperability based on industrial standards is needed. As an enhancement of IEEE 802.15.4 MAC sublayer, the ratification of IEEE 802.15.4e standard makes a step towards IoT medium access control (MAC) for industrial applications. One of the significant enhancements in IEEE 802.15.4e is different MAC modes. However, IEEE 802.15.4e does not specify standardized scheduling policy for network building and data transmission maintenance. It is basically application specific. In general, activities performed at the MAC sublayer contribute to sensor energy consumption. Therefore, an efficient MAC scheme is needed to utilize network resources more efficiently, minimize energy consumption level and at the same time improve data transmission of the network. In this thesis work, we focus on proposing transmission schemes for improving energy consumption for data transmission in IoT networks and as well as increasing average packet delivery ratio (PDR). Our target is to improve time slotted channel hopping (TSCH) mode that enables deterministic access and robust network. The focus is on dedicated and shared slots in TSCH. More specifically, we propose two MAC schemes; relevance- and aggregation-based scheduling for data transmission in IEEE 802.15.4e IoT networks. With relevance-based scheduling, the coordinator node builds and maintains communication in the network based on a historical data value of member nodes. On the other hand, aggregation-based scheduling iii enables the coordinator node to build and maintain communication by integrating multiple data inside a single frame payload at the source node before transmission. Further, the proposed schemes are implemented using network simulator version 3 (ns-3). We use Ubuntu 16.04.2 as the operating system for our implementation and performance evaluation. Numerical results for a few performance metrics including PDR, collision probability, delay, and energy consumption are obtained through extensive simulations. The superiority of the proposed schemes is demonstrated by comparing the simulation results with that of IEEE 802.15.4e TSCH standard under varies network scenario