Duty-cycled Wake-up Schemes for Ultra-low Power Wireless Communications

In sensor network applications with low traffic intensity, idle channel listening is one of the main sources of energy waste.The use of a dedicated low-power wake-up receiver (WRx) which utilizes duty-cycled channel listening can significantlyreduce idle listening energy cost. In this thesis such a scheme is introduced and it is called DCW-MAC, an acronym forduty-cycled wake-up receiver based medium access control.We develop the concept in several steps, starting with an investigation into the properties of these schemes under idealizedconditions. This analysis show that DCW-MAC has the potential to significantly reduce energy costs, compared to twoestablished reference schemes based only on low-power wake up receivers or duty-cycled listening. Findings motivatefurther investigations and more detailed analysis of energy consumption. We do this in two separate steps, first concentratingon the energy required to transmit wake-up beacons and later include all energy costs in the analysis. The more completeanalysis makes it possible to optimize wake-up beacons and other DCW-MAC parameters, such as sleep and listen intervals,for minimal energy consumption. This shows how characteristics of the wake-up receiver influence how much, and if, energycan be saved and what the resulting average communication delays are. Being an analysis based on closed form expressions,rather than simulations, we can derive and verify good approximations of optimal energy consumption and resulting averagedelays, making it possible to quickly evaluate how a different wake-up receiver characteristic influences what is possible toachieve in different scenarios.In addition to the direct optimizations of the DCW-MAC scheme, we also provide a proof-of-concept in 65 nm CMOS,showing that the digital base-band needed to implement DCW-MAC has negligible energy consumption compared to manylow-power analog front-ends in literature. We also propose a a simple frame-work for comparing the relative merits ofanalog front-ends for wake-up receivers, where we use the experiences gained about DCW-MAC energy consumption toprovide a simple relation between wake-up receiver/analog front-end properties and energy consumption for wide ranges ofscenario parameters. Using this tool it is possible to compare analog front-ends used in duty-cycled wake-up schemes, evenif they are originally designed for different scenarios.In all, the thesis presents a new wake-up receiver scheme for low-power wireless sensor networks and provide a comprehensiveanalysis of many of its important properties

Improving practical sensitivity of energy optimized wake-up receivers: proof of concept in 65nm CMOS

We present a high performance low-power digital base-band architecture, specially designed for an energy optimized duty-cycled wake-up receiver scheme. Based on a careful wake-up beacon design, a structured wake-up beacon detection technique leads to an architecture that compensates for the implementation loss of a low-power wake-up receiver front-end at low energy and area costs. Design parameters are selected by energy optimization and the architecture is easily scalable to support various network sizes. Fabricated in 65nm CMOS, the digital base-band consumes 0.9uW (V_DD=0.37V) in sub-threshold operation at 250kbps, with appropriate 97% wake-up beacon detection and 0.04% false alarm probabilities. The circuit is fully functional at a minimum V_DD of 0.23V at f_max=5kHz and 0.018uW power consumption. Based on these results we show that our digital base-band can be used as a companion to compensate for front-end implementation losses resulting from the limited wake-up receiver power budget at a negligible cost. This implies an improvement of the practical sensitivity of the wake-up receiver, compared to what is traditionally reported.Comment: Submitted to IEEE Sensors Journa

Aeronautical Engineering: A special bibliography with indexes, supplement 62

This bibliography lists 306 reports, articles, and other documents introduced into the NASA scientific and technical information system in September 1975

Aeronautical Engineering: A continuing bibliography with indexes, supplement 99

This bibliography lists 292 reports, articles, and other documents introduced into the NASA scientific and technical information system in July 1978

How sleep modes and traffic demands affect the energy efficiency in optical access networks

An ever-increasing bandwidth demand is the main driver to investigate next-generation optical access (NGOA) networks. These networks, however, do not only have to comply with increasing data rates, but they should also meet the societal green agenda. As the access part consumes a major fraction of the energy consumption in today's fiber-to-the-home-based telecommunication networks, the energy efficiency of NGOA networks should be an important design parameter. In this paper, we present a detailed evaluation of the energy consumption in different NGOA technologies. Furthermore, we analyze the effects of (1) introducing low power modes (e.g., sleep and doze modes) in the various NGOA technologies and (2) using optimal split ratios adjusted to the traffic demands so that the energy consumption is optimized for the desired quality of service level

RF Energy Harvester-based Wake-up Receiver

Wake-up receivers (WuRxs) can improve the life- time of a wireless sensor network by reducing energy consump- tion from undesirable idle listening. The amplitude level of the incoming RF signal is used by a WuRx to generate an interrupt and wake up the radio of a sleeping sensor node. Existing passive WuRx designs are generally based on RFID tags that incur high cost and complexity. Thus, there is a need for cost-effective and low-complexity WuRxs suited for both long-range and directed wake-ups. In this work, we present a WuRx design using an RF energy harvesting circuit (RFHC). Experimental results show that our RFHC-based WuRx can provide a wake-up range sensitivity around 4 cm/mW at low transmit RF powers ( < 20 mW), which scales to a long wake-up range at high powers. Our design also obtains accurate selective wake-ups. We finally present simulation-based studies for optimizing the design of RFHCs that enhance decoding efficiency with improved rise and fall times

Efficient and Interference-Resilient Wireless Connectivity for IoT Applications

With the coming of age of the Internet of Things (IoT), demand on ultra-low power (ULP) and low-cost radios will continue to boost tremendously. The Bluetooth-Low-energy (BLE) standard provides a low power solution to connect IoT nodes with mobile devices, however, the power of maintaining a connection with a reasonable latency remains the limiting factor in defining the lifetime of event-driven BLE devices. BLE radio power consumption is in the milliwatt range and can be duty cycled for average powers around 30μW, but at the expense of long latency. Furthermore, wireless transceivers traditionally perform local oscillator (LO) calibration using an external crystal oscillator (XTAL) that adds significant size and cost to a system. Removing the XTAL enables a true single-chip radio, but an alternate means for calibrating the LO is required. Innovations in both the system architecture and circuits implementation are essential for the design of truly ubiquitous receivers for IoT applications. This research presents two porotypes as back-channel BLE receivers, which have lower power consumption while still being robust in the presents of interference and able to receive back-channel message from BLE compliant transmitters. In addition, the first crystal-less transmitter with symmetric over-the-air clock recovery compliant with the BLE standard using a GFSK-Modulated BLE Packet is presented.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/162942/1/abdulalg_1.pd

Ultra-Low Power Wake Up Receiver For Medical Implant Communications Service Transceiver

This thesis explores the specific requirements and challenges for the design of a dedicated wake-up receiver for medical implant communication services equipped with a novel “uncertain-IF†architecture combined with a high – Q filtering MEMS resonator and a free running CMOS ring oscillator as the RF LO. The receiver prototype, implements an IBM 0.18μm mixed-signal 7ML RF CMOS technology and achieves a sensitivity of -62 dBm at 404MHz while consuming \u3c100 μW from a 1 V supply