Parallel Evolutionary Algorithms for Energy Aware Scheduling

International audienceReducing energy consumption is an increasingly important issue in computing and embedded systems. In computing systems, minimizing energy consumption can significantly reduces the amount of energy bills. The demand for computing systems steadily increases and the cost of energy continues to rise. In embedded systems, reducing the use of energy allows to extend the autonomy of these systems. In addition, the reduction of energy decreases greenhouse gas emissions. Therefore, many researches are carried out to develop new methods in order to consume less energy. This chapter gives an overview of the main methods used to reduce the energy consumption in computing and embedded systems. As a use case and to give an example of a method, the chapter describes our new parallel bi-objective hybrid genetic algorithm that takes into account the completion time and the energy consumption. In terms of energy consumption, the obtained results show that our approach outperforms previous scheduling methods by a significant margin. In terms of completion time, the obtained schedules are also shorter than those of other algorithms

Efficient and elastic management of computing infrastructures

Tesis por compendio[EN] Modern data centers integrate a lot of computer and electronic devices. However, some reports state that the mean usage of a typical data center is around 50% of its peak capacity, and the mean usage of each server is between 10% and 50%. A lot of energy is destined to power on computer hardware that most of the time remains idle. Therefore, it would be possible to save energy simply by powering off those parts from the data center that are not actually used, and powering them on again as they are needed. Most data centers have computing clusters that are used for intensive computing, recently evolving towards an on-premises Cloud service model. Despite the use of low consuming components, higher energy savings can be achieved by dynamically adapting the system to the actual workload. The main approach in this case is the usage of energy saving criteria for scheduling the jobs or the virtual machines into the working nodes. The aim is to power off idle servers automatically. But it is necessary to schedule the power management of the servers in order to minimize the impact on the end users and their applications. The objective of this thesis is the elastic and efficient management of cluster infrastructures, with the aim of reducing the costs associated to idle components. This objective is addressed by automating the power management of the working nodes in a computing cluster, and also proactive stimulating the load distribution to achieve idle resources that could be powered off by means of memory overcommitment and live migration of virtual machines. Moreover, this automation is of interest for virtual clusters, as they also suffer from the same problems. While in physical clusters idle working nodes waste energy, in the case of virtual clusters that are built from virtual machines, the idle working nodes can waste money in commercial Clouds or computational resources in an on-premises Cloud.[ES] En los Centros de Procesos de Datos (CPD) existe una gran concentración de dispositivos informáticos y de equipamiento electrónico. Sin embargo, algunos estudios han mostrado que la utilización media de los CPD está en torno al 50%, y que la utilización media de los servidores se encuentra entre el 10% y el 50%. Estos datos evidencian que existe una gran cantidad de energía destinada a alimentar equipamiento ocioso, y que podríamos conseguir un ahorro energético simplemente apagando los componentes que no se estén utilizando. En muchos CPD suele haber clusters de computadores que se utilizan para computación de altas prestaciones y para la creación de Clouds privados. Si bien se ha tratado de ahorrar energía utilizando componentes de bajo consumo, también es posible conseguirlo adaptando los sistemas a la carga de trabajo en cada momento. En los últimos años han surgido trabajos que investigan la aplicación de criterios energéticos a la hora de seleccionar en qué servidor, de entre los que forman un cluster, se debe ejecutar un trabajo o alojar una máquina virtual. En muchos casos se trata de conseguir equipos ociosos que puedan ser apagados, pero habitualmente se asume que dicho apagado se hace de forma automática, y que los equipos se encienden de nuevo cuando son necesarios. Sin embargo, es necesario hacer una planificación de encendido y apagado de máquinas para minimizar el impacto en el usuario final. En esta tesis nos planteamos la gestión elástica y eficiente de infrastructuras de cálculo tipo cluster, con el objetivo de reducir los costes asociados a los componentes ociosos. Para abordar este problema nos planteamos la automatización del encendido y apagado de máquinas en los clusters, así como la aplicación de técnicas de migración en vivo y de sobreaprovisionamiento de memoria para estimular la obtención de equipos ociosos que puedan ser apagados. Además, esta automatización es de interés para los clusters virtuales, puesto que también sufren el problema de los componentes ociosos, sólo que en este caso están compuestos por, en lugar de equipos físicos que gastan energía, por máquinas virtuales que gastan dinero en un proveedor Cloud comercial o recursos en un Cloud privado.[CA] En els Centres de Processament de Dades (CPD) hi ha una gran concentració de dispositius informàtics i d'equipament electrònic. No obstant això, alguns estudis han mostrat que la utilització mitjana dels CPD està entorn del 50%, i que la utilització mitjana dels servidors es troba entre el 10% i el 50%. Estes dades evidencien que hi ha una gran quantitat d'energia destinada a alimentar equipament ociós, i que podríem aconseguir un estalvi energètic simplement apagant els components que no s'estiguen utilitzant. En molts CPD sol haver-hi clusters de computadors que s'utilitzen per a computació d'altes prestacions i per a la creació de Clouds privats. Si bé s'ha tractat d'estalviar energia utilitzant components de baix consum, també és possible aconseguir-ho adaptant els sistemes a la càrrega de treball en cada moment. En els últims anys han sorgit treballs que investiguen l'aplicació de criteris energètics a l'hora de seleccionar en quin servidor, d'entre els que formen un cluster, s'ha d'executar un treball o allotjar una màquina virtual. En molts casos es tracta d'aconseguir equips ociosos que puguen ser apagats, però habitualment s'assumix que l'apagat es fa de forma automàtica, i que els equips s'encenen novament quan són necessaris. No obstant això, és necessari fer una planificació d'encesa i apagat de màquines per a minimitzar l'impacte en l'usuari final. En esta tesi ens plantegem la gestió elàstica i eficient d'infrastructuras de càlcul tipus cluster, amb l'objectiu de reduir els costos associats als components ociosos. Per a abordar este problema ens plantegem l'automatització de l'encesa i apagat de màquines en els clusters, així com l'aplicació de tècniques de migració en viu i de sobreaprovisionament de memòria per a estimular l'obtenció d'equips ociosos que puguen ser apagats. A més, esta automatització és d'interés per als clusters virtuals, ja que també patixen el problema dels components ociosos, encara que en este cas estan compostos per, en compte d'equips físics que gasten energia, per màquines virtuals que gasten diners en un proveïdor Cloud comercial o recursos en un Cloud privat.Alfonso Laguna, CD. (2015). Efficient and elastic management of computing infrastructures [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/57187Compendi

Developing New Power Management and High-Reliability Schemes in Data-Intensive Environment

With the increasing popularity of data-intensive applications as well as the large-scale computing and storage systems, current data centers and supercomputers are often dealing with extremely large data-sets. To store and process this huge amount of data reliably and energy-efficiently, three major challenges should be taken into consideration for the system designers. Firstly, power conservation–Multicore processors or CMPs have become a mainstream in the current processor market because of the tremendous improvement in transistor density and the advancement in semiconductor technology. However, the increasing number of transistors on a single die or chip reveals a super-linear growth in power consumption [4]. Thus, how to balance system performance and power-saving is a critical issue which needs to be solved effectively. Secondly, system reliability–Reliability is a critical metric in the design and development of replication-based big data storage systems such as Hadoop File System (HDFS). In the system with thousands machines and storage devices, even in-frequent failures become likely. In Google File System, the annual disk failure rate is 2:88%,which means you were expected to see 8,760 disk failures in a year. Unfortunately, given an increasing number of node failures, how often a cluster starts losing data when being scaled out is not well investigated. Thirdly, energy efficiency–The fast processing speeds of the current generation of supercomputers provide a great convenience to scientists dealing with extremely large data sets. The next generation of exascale supercomputers could provide accurate simulation results for the automobile industry, aerospace industry, and even nuclear fusion reactors for the very first time. However, the energy cost of super-computing is extremely high, with a total electricity bill of 9 million dollars per year. Thus, conserving energy and increasing the energy efficiency of supercomputers has become critical in recent years. This dissertation proposes new solutions to address the above three key challenges for current large-scale storage and computing systems. Firstly, we propose a novel power management scheme called MAR (model-free, adaptive, rule-based) in multiprocessor systems to minimize the CPU power consumption subject to performance constraints. By introducing new I/O wait status, MAR is able to accurately describe the relationship between core frequencies, performance and power consumption. Moreover, we adopt a model-free control method to filter out the I/O wait status from the traditional CPU busy/idle model in order to achieve fast responsiveness to burst situations and take full advantage of power saving. Our extensive experiments on a physical testbed demonstrate that, for SPEC benchmarks and data-intensive (TPC-C) benchmarks, an MAR prototype system achieves 95.8-97.8% accuracy of the ideal power saving strategy calculated offline. Compared with baseline solutions, MAR is able to save 12.3-16.1% more power while maintain a comparable performance loss of about 0.78-1.08%. In addition, more simulation results indicate that our design achieved 3.35-14.2% more power saving efficiency and 4.2-10.7% less performance loss under various CMP configurations as compared with various baseline approaches such as LAST, Relax, PID and MPC. Secondly, we create a new reliability model by incorporating the probability of replica loss to investigate the system reliability of multi-way declustering data layouts and analyze their potential parallel recovery possibilities. Our comprehensive simulation results on Matlab and SHARPE show that the shifted declustering data layout outperforms the random declustering layout in a multi-way replication scale-out architecture, in terms of data loss probability and system reliability by upto 63% and 85% respectively. Our study on both 5-year and 10-year system reliability equipped with various recovery bandwidth settings shows that, the shifted declustering layout surpasses the two baseline approaches in both cases by consuming up to 79 % and 87% less recovery bandwidth for copyset, as well as 4.8% and 10.2% less recovery bandwidth for random layout. Thirdly, we develop a power-aware job scheduler by applying a rule based control method and taking into account real world power and speedup profiles to improve power efficiency while adhering to predetermined power constraints. The intensive simulation results shown that our proposed method is able to achieve the maximum utilization of computing resources as compared to baseline scheduling algorithms while keeping the energy cost under the threshold. Moreover, by introducing a Power Performance Factor (PPF) based on the real world power and speedup profiles, we are able to increase the power efficiency by up to 75%

Survey on Additive Manufacturing, Cloud 3D Printing and Services

Cloud Manufacturing (CM) is the concept of using manufacturing resources in a service oriented way over the Internet. Recent developments in Additive Manufacturing (AM) are making it possible to utilise resources ad-hoc as replacement for traditional manufacturing resources in case of spontaneous problems in the established manufacturing processes. In order to be of use in these scenarios the AM resources must adhere to a strict principle of transparency and service composition in adherence to the Cloud Computing (CC) paradigm. With this review we provide an overview over CM, AM and relevant domains as well as present the historical development of scientific research in these fields, starting from 2002. Part of this work is also a meta-review on the domain to further detail its development and structure

Towards Optimal Application Mapping for Energy-Efficient Many-Core Platforms

Siirretty Doriast

Shadow Price Guided Genetic Algorithms

The Genetic Algorithm (GA) is a popular global search algorithm. Although it has been used successfully in many fields, there are still performance challenges that prevent GA’s further success. The performance challenges include: difficult to reach optimal solutions for complex problems and take a very long time to solve difficult problems. This dissertation is to research new ways to improve GA’s performance on solution quality and convergence speed. The main focus is to present the concept of shadow price and propose a two-measurement GA. The new algorithm uses the fitness value to measure solutions and shadow price to evaluate components. New shadow price Guided operators are used to achieve good measurable evolutions. Simulation results have shown that the new shadow price Guided genetic algorithm (SGA) is effective in terms of performance and efficient in terms of speed

STATISTICAL MACHINE LEARNING BASED MODELING FRAMEWORK FOR DESIGN SPACE EXPLORATION AND RUN-TIME CROSS-STACK ENERGY OPTIMIZATION FOR MANY-CORE PROCESSORS

The complexity of many-core processors continues to grow as a larger number of heterogeneous cores are integrated on a single chip. Such systems-on-chip contains computing structures ranging from complex out-of-order cores, simple in-order cores, digital signal processors (DSPs), graphic processing units (GPUs), application specific processors, hardware accelerators, I/O subsystems, network-on-chip interconnects, and large caches arranged in complex hierarchies. While the industry focus is on putting higher number of cores on a single chip, the key challenge is to optimally architect these many-core processors such that performance, energy and area constraints are satisfied. The traditional approach to processor design through extensive cycle accurate simulations are ill-suited for designing many-core processors due to the large microarchitecture design space that must be explored. Additionally it is hard to optimize such complex processors and the applications that run on them statically at design time such that performance and energy constraints are met under dynamically changing operating conditions. The dissertation establishes statistical machine learning based modeling framework that enables the efficient design and operation of many-core processors that meets performance, energy and area constraints. We apply the proposed framework to rapidly design the microarchitecture of a many-core processor for multimedia, computer graphics rendering, finance, and data mining applications derived from the Parsec benchmark. We further demonstrate the application of the framework in the joint run-time adaptation of both the application and microarchitecture such that energy availability constraints are met

Journal of Telecommunications and Information Technology, 2017, nr 1

kwartalni