How sleep modes and traffic demands affect the energy efficiency in optical access networks

An ever-increasing bandwidth demand is the main driver to investigate next-generation optical access (NGOA) networks. These networks, however, do not only have to comply with increasing data rates, but they should also meet the societal green agenda. As the access part consumes a major fraction of the energy consumption in today's fiber-to-the-home-based telecommunication networks, the energy efficiency of NGOA networks should be an important design parameter. In this paper, we present a detailed evaluation of the energy consumption in different NGOA technologies. Furthermore, we analyze the effects of (1) introducing low power modes (e.g., sleep and doze modes) in the various NGOA technologies and (2) using optimal split ratios adjusted to the traffic demands so that the energy consumption is optimized for the desired quality of service level

Optimized design of high power density EMI filters for power electronic converters

Nowadays, power density of power converters and related EMI filters is gaining more and more attention. This severely impacts on the design constraints in several application domains. A conventional design of the EMI filter does not guarantee the selection of components/configuration leading to the best power density. For this reason, an optimized design procedure of discrete EMI filters in terms of power density is proposed in this paper. It is based on a previously developed rule-based design procedure, introducing here additional features to obtain a more effective optimization of EMI filter's power density. The proposed approach has been validated in terms of EMI filter's performance and size reduction, by a comparison between an EMI filter designed using the optimized procedure and a conventionally designed one, for two different case studies

Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well

Optimized Application of Sustainable Development Strategy in International Engineering Project Management

[EN] The aim of this paper is to establish an international framework for sustainable project management in engineering, to make up the lack of research in this field, and to propose a scientific theoretical basis for the establishment of a new project management system. The article adopts literature review, mathematical programming algorithm and case study as the research method. The literature review applied the visual clustering research method and analyzed the results of 21-year research in this field. As a result, the project management system was found to have defects and deficiencies. A mathematical model was established to analyze the composition and elements of the optimized international project management system. The case study research selected large bridges for analysis and verified the superiority and practicability of the theoretical system. Thus, the goal of sustainable development of bridges was achieved. The value of this re-search lies in establishing a comprehensive international project management system model; truly integrating sustainable development with project management; providing new research frames and management models to promote the sustainable development of the construction industry.This research was funded by the Spanish Ministry of Science and Innovation, along with FEDER (Fondo Europeo de Desarrollo Regional), project grant number: PID2020-117056RB-I00.Zhou, Z.; Alcalá-González, J.; Yepes, V. (2021). Optimized Application of Sustainable Development Strategy in International Engineering Project Management. Mathematics. 9(14):1-30. https://doi.org/10.3390/math9141633S13091

Controlling Excitons: Concepts for Phosphorescent Organic LEDs at High Brightness

This work focusses on the high brightness performance of phosphorescent organic light-emitting diodes (OLEDs). The use of phosphorescent emitter molecules in OLEDs is essential to realize internal electron-photon conversion efficiencies of 100 %. However, due to their molecular nature, the excited triplet states have orders of magnitude longer time constants compared to their fluorescent counterparts which, in turn, strongly increases the probability of bimolecular annihilation. As a consequence, the efficiencies of phosphorescent OLEDs decline at high brightness – an effect known as efficiency roll-off, for which it has been shown to be dominated by triplet-triplet annihilation (TTA). In this work, TTA of the archetype phosphorescent emitter Ir(ppy)3 is investi- gated in time-resolved photoluminescence experiments. For the widely used mixed system CBP:Ir(ppy)3, host-guest TTA – an additional unwanted TTA channel – is experimentally observed at high excitation levels. By using matrix materials with higher triplet energies, this effect is efficiently suppressed, however further studies show that the efficiency roll-off of Ir(ppy)3 is much more pronounced than predicted by a model based on Förster-type energy transfer, which marks the intrinsic limit for TTA. These results suggest that the emitter molecules show a strong tendency to form aggregates in the mixed film as the origin for enhanced TTA. Transmission electron microscopy images of Ir(ppy)3 doped mixed films give direct proof of emitter aggregates. Based on these results, two concepts are developed that improve the high brightness performance of OLEDs. In a first approach, thin intrinsic matrix interlayers are incorporated in the emission layer leading to a one-dimensional exciton confinement that suppresses exciton migration and, consequently, TTA. The second concept reduces the efficiency roll-off by using an emitter molecule with slightly differ- ent chemical structure, i.e. Ir(ppy)2(acac). Compared to Ir(ppy)3, this emitter has a much smaller ground state dipole moment, suggesting that the improved performance is a result of weaker aggregation in the mixed film. The knowledge gained in the investigation of triplet-triplet annihilation is further used to develop a novel emission layer design for white organic LEDs. It comprises three phosphorescent emitters for blue, green, and red emission embedded in a multilayer architecture. The key feature of this concept is the matrix material used for the blue emitter FIrpic: Its triplet energy is in resonance with the FIrpic excited state energy which enables low operating voltages and high power efficiencies by reducing thermal relaxation. In order to further increase the device efficiency, the OLED architecture is optically optimized using high refractive index substrates and thick electron transport layers. These devices reach efficiencies which are on par with fluorescent tubes – the current efficiency benchmark for light sources.Diese Arbeit richtet ihren Fokus auf die Untersuchung der Leistungsfähigkeit von phosphoreszenten, Licht-emittierenden organischen Dioden (OLEDs) im Bereich hoher Betriebshelligkeiten. Phosphoreszente Emittermoleku ̈le werden in OLEDs eingesetzt, um interne Elektron-Photon Konversionseffizienzen von 100% zu erreichen. Begründet in ihrer chemischen Struktur, weisen die angeregten Triplett-Zustände dieser Emitter um Größenordnungen längere Zeitkonstanten als die Emission fluo- reszenter Materialien auf, sodass die Wahrscheinlichkeit bimolekularer Auslöschung stark ansteigt. Dies resultiert in einem deutlichen Effizienzrückgang phosphoreszenter OLEDs bei großen Leuchtdichten. Dieser als Roll-off bekannter Effekt wird bei hohen Anregungsdichten hauptsächlich durch Triplett-Triplett Annihilation (TTA) bestimmt. In der Arbeit wird TTA an einem Modellmolekül, dem phosphoreszenten Emit- ter Ir(ppy)3, in zeitaufgelösten Photolumineszenz Experimenten untersucht. Für das bekannte Emittersystem CBP:Ir(ppy)3 wird bei hohen Anregungsdichten Host-Guest TTA beobachtet, was einen zusätzlichen, ungewünschten TTA Kanal darstellt. Dieser Effekt wird durch das Verwenden von Matrix Materialien mit höherer Triplett Energie vermieden, jedoch zeigt sich in weiteren Untersuchungen, dass der Roll-off deutlich stärker ist als von einem auf Förster Energieübertrag basierendem Modell vorhergesagt, welches selbst ein intrinsisches Limit für TTA in phosphoreszenten Systemen beschreibt. Die Diskrepanz zwischen experimenteller Beobachtung und Modellvorhersage wird durch eine starke Tendenz des Emitters, Aggregate zu bilden, erklärt, was TTA deutlich verstärkt. Diese Aggregate werden mit Hilfe von Transmissionselektronenmikroskopie an Ir(ppy)3-dotierten Mischsystemen direkt nachgewiesen. Basierend auf diesen Resultaten werden zwei Konzepte entwickelt, um die Effizienz phosphoreszenter Systeme bei hohen Helligkeiten zu verbessern. Im ersten Ansatz werden dünne intrinsische Schichten des Matrixmaterials in die Emissionsschicht eingebaut, was die Exzitonenbewegung in einer Raumrichtung und damit auch TTA stark unterdrückt. Das zweite Konzept reduziert den Effizienz Roll-off durch die Verwendung eines phosphoreszenten Emitters Ir(ppy)2(acac) mit einer leicht abgeänderten Molekularstruktur. Im Vergleich mit Ir(ppy)3 weist dieser ein deutlich kleineres Dipolmoment im molekularen Grundzustand auf, wodurch die Aggregation vermindert wird. Aufbauend auf den Ergebnissen der TTA wird ein neuartiges Emissionsschicht-Design für weißes Licht entwickelt. In diesem Konzept werden drei phosphoreszente Materialien für blaue, grüne und rote Farbe in eine Vielschicht-Architektur eingebracht. Das Hauptmerkmal der Emissionsschicht ist die Wahl des Matrix-Materials für dem blauen Emitter FIrpic: Seine Triplett Energie liegt resonant zu dem FIrpic Triplett Zustand, wodurch niedrige Betriebsspannungen und hohe Leistungseffizienzen ermöglicht werden, da die thermische Relaxierung reduziert wird. Um die Ef- fizienz dieser weißen OLEDs weiter zu erhöhen, wird die entwickelte OLED Architektur zusätzlich durch die Verwendung von hochbrechenden Substraten und dicken Elektronen-Transportschichten optisch optimiert. Bei beleuchtungsrelevanten Helligkeiten erreichen diese OLEDs das Effizienzniveau von Leuchtstoffröhren – letztere stellen heute den Effizienz-Maßstab dar