Multiprocessor System-on-Chips based Wireless Sensor Network Energy Optimization

Wireless Sensor Network (WSN) is an integrated part of the Internet-of-Things (IoT) used to monitor the physical or environmental conditions without human intervention. In WSN one of the major challenges is energy consumption reduction both at the sensor nodes and network levels. High energy consumption not only causes an increased carbon footprint but also limits the lifetime (LT) of the network. Network-on-Chip (NoC) based Multiprocessor System-on-Chips (MPSoCs) are becoming the de-facto computing platform for computationally extensive real-time applications in IoT due to their high performance and exceptional quality-of-service. In this thesis a task scheduling problem is investigated using MPSoCs architecture for tasks with precedence and deadline constraints in order to minimize the processing energy consumption while guaranteeing the timing constraints. Moreover, energy-aware nodes clustering is also performed to reduce the transmission energy consumption of the sensor nodes. Three distinct problems for energy optimization are investigated given as follows: First, a contention-aware energy-efficient static scheduling using NoC based heterogeneous MPSoC is performed for real-time tasks with an individual deadline and precedence constraints. An offline meta-heuristic based contention-aware energy-efficient task scheduling is developed that performs task ordering, mapping, and voltage assignment in an integrated manner. Compared to state-of-the-art scheduling our proposed algorithm significantly improves the energy-efficiency. Second, an energy-aware scheduling is investigated for a set of tasks with precedence constraints deploying Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs. A novel population based algorithm called ARSH-FATI is developed that can dynamically switch between explorative and exploitative search modes at run-time. ARSH-FATI performance is superior to the existing task schedulers developed for homogeneous VFI-NoC-MPSoCs. Third, the transmission energy consumption of the sensor nodes in WSN is reduced by developing ARSH-FATI based Cluster Head Selection (ARSH-FATI-CHS) algorithm integrated with a heuristic called Novel Ranked Based Clustering (NRC). In cluster formation parameters such as residual energy, distance parameters, and workload on CHs are considered to improve LT of the network. The results prove that ARSH-FATI-CHS outperforms other state-of-the-art clustering algorithms in terms of LT.University of Derby, Derby, U

Energy-aware scheduling of streaming applications on edge-devices in IoT based healthcare

The reliance on Network-on-Chip (NoC) based Multiprocessor Systems-on-Chips (MPSoCs) is proliferating in modern embedded systems to satisfy the higher performance requirement of multimedia streaming applications. Task level coarse grained software pipeling also called re-timing when combined with Dynamic Voltage and Frequency Scaling (DVFS) has shown to be an effective approach in significantly reducing energy consumption of the multiprocessor systems at the expense of additional delay. In this paper we develop a novel energy-aware scheduler considering tasks with conditional constraints on Voltage Frequency Island (VFI) based heterogeneous NoC-MPSoCs deploying re-timing integrated with DVFS for real-time streaming applications. We propose a novel task level re-timing approach called R-CTG and integrate it with non linear programming based scheduling and voltage scaling approach referred to as ALI-EBAD. The R-CTG approach aims to minimize the latency caused by re-timing without compromising on energy-efficiency. Compared to R-DAG, the state-of-the-art approach designed for traditional Directed Acyclic Graph (DAG) based task graphs, R-CTG significantly reduces the re-timing latency because it only re-times tasks that free up the wasted slack. To validate our claims we performed experiments on using 12 real benchmarks, the results demonstrate that ALI-EBAD out performs CA-TMES-Search and CA-TMES-Quick task schedulers in terms of energy-efficiency.N/

Contention energy-aware real-time task mapping on NoC based heterogeneous MPSoCs

© 2018 IEEE. Network-on-Chip (NoC)-based multiprocessor system-on-chips (MPSoCs) are becoming the de-facto computing platform for computationally intensive real-time applications in the embedded systems due to their high performance, exceptional quality-of-service (QoS) and energy efficiency over superscalar uniprocessor architectures. Energy saving is important in the embedded system because it reduces the operating cost while prolongs lifetime and improves the reliability of the system. In this paper, contention-aware energy efficient static mapping using NoC-based heterogeneous MPSoC for real-time tasks with an individual deadline and precedence constraints is investigated. Unlike other schemes task ordering, mapping, and voltage assignment are performed in an integrated manner to minimize the processing energy while explicitly reduce contention between the communications and communication energy. Furthermore, both dynamic voltage and frequency scaling and dynamic power management are used for energy consumption optimization. The developed contention-aware integrated task mapping and voltage assignment (CITM-VA) static energy management scheme performs tasks ordering using earliest latest finish time first (ELFTF) strategy that assigns priorities to the tasks having shorter latest finish time (LFT) over the tasks with longer LFT. It remaps every task to a processor and/or discrete voltage level that reduces processing energy consumption. Similarly, the communication energy is minimized by assigning discrete voltage levels to the NoC links. Further, total energy efficiency is achieved by putting the processor into a low-power state when feasible. Moreover, this approach resolves the contention between communications that traverse the same link by allocating links to communications with higher priority. The results obtained through extensive simulations of real-world benchmarks demonstrate that CITM-VA approach outperforms state-of-the-art technique and achieves an average 30% total energy improvement. Additionally, it maintains high QoS and robustness for real-time applications

Energy-efficient Static Task Scheduling on VFI based NoC-HMPSoCs for Intelligent Edge Devices in Cyber-Physical Systems

The interlinked processing units in the modern Cyber-Physical Systems (CPS) creates a large network of connected computing embedded systems. Network-on-Chip (NoC) based multiprocessor system-on-chip (MPSoC) architecture is becoming a de-facto computing platform for real-time applications due to its higher performance and Quality-of-Service (QoS). The number of processors has increased significantly on the multiprocessor systems in CPS therefore, Voltage Frequency Island (VFI) recently adopted for effective energy management mechanism in the large scale multiprocessor chip designs. In this paper, we investigate energy and contention-aware static scheduling for tasks with precedence and deadline constraints on intelligent edge devices deploying heterogeneous VFI based NoC-MPSoCs with DVFS-enabled processors. Unlike the existing population-based optimization algorithms, we propose a novel population-based algorithm called ARSH-FATI that can dynamically switch between explorative and exploitative search modes at run-time. Our static scheduler ARHS-FATI collectively performs task mapping, scheduling, and voltage scaling. Consequently, its performance is superior to the existing state-of-the-art approach proposed for homogeneous VFI based NoC-MPSoCs. We also developed a communication contention-aware Earliest Edge Consistent Deadline First (EECDF) scheduling algorithm and gradient descent inspired voltage scaling algorithm called Energy Gradient Decent (EGD). We have introduced a notion of Energy Gradient (EG) that guides EGD in its search for islands voltage settings and minimize the total energy consumption. We conducted the experiments on 8 real benchmarks adopted from Embedded Systems Synthesis Benchmarks (E3S). Our static scheduling approach ARSH-FATI outperformed state-of-the-art technique and achieved an average energy-efficiency of ~ 24% and ~ 30% over CA-TMES-Search and CA-TMES-Quick respectively

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

Adaptive Knobs for Resource Efficient Computing

Performance demands of emerging domains such as artificial intelligence, machine learning and vision, Internet-of-things etc., continue to grow. Meeting such requirements on modern multi/many core systems with higher power densities, fixed power and energy budgets, and thermal constraints exacerbates the run-time management challenge. This leaves an open problem on extracting the required performance within the power and energy limits, while also ensuring thermal safety. Existing architectural solutions including asymmetric and heterogeneous cores and custom acceleration improve performance-per-watt in specific design time and static scenarios. However, satisfying applications’ performance requirements under dynamic and unknown workload scenarios subject to varying system dynamics of power, temperature and energy requires intelligent run-time management. Adaptive strategies are necessary for maximizing resource efficiency, considering i) diverse requirements and characteristics of concurrent applications, ii) dynamic workload variation, iii) core-level heterogeneity and iv) power, thermal and energy constraints. This dissertation proposes such adaptive techniques for efficient run-time resource management to maximize performance within fixed budgets under unknown and dynamic workload scenarios. Resource management strategies proposed in this dissertation comprehensively consider application and workload characteristics and variable effect of power actuation on performance for pro-active and appropriate allocation decisions. Specific contributions include i) run-time mapping approach to improve power budgets for higher throughput, ii) thermal aware performance boosting for efficient utilization of power budget and higher performance, iii) approximation as a run-time knob exploiting accuracy performance trade-offs for maximizing performance under power caps at minimal loss of accuracy and iv) co-ordinated approximation for heterogeneous systems through joint actuation of dynamic approximation and power knobs for performance guarantees with minimal power consumption. The approaches presented in this dissertation focus on adapting existing mapping techniques, performance boosting strategies, software and dynamic approximations to meet the performance requirements, simultaneously considering system constraints. The proposed strategies are compared against relevant state-of-the-art run-time management frameworks to qualitatively evaluate their efficacy

CONTREX: Design of embedded mixed-criticality CONTRol systems under consideration of EXtra-functional properties

The increasing processing power of today’s HW/SW platforms leads to the integration of more and more functions in a single device. Additional design challenges arise when these functions share computing resources and belong to different criticality levels. CONTREX complements current activities in the area of predictable computing platforms and segregation mechanisms with techniques to consider the extra-functional properties, i.e., timing constraints, power, and temperature. CONTREX enables energy efficient and cost aware design through analysis and optimization of these properties with regard to application demands at different criticality levels. This article presents an overview of the CONTREX European project, its main innovative technology (extension of a model based design approach, functional and extra-functional analysis with executable models and run-time management) and the final results of three industrial use-cases from different domain (avionics, automotive and telecommunication).The work leading to these results has received funding from the European Community’s Seventh Framework Programme FP7/2007-2011 under grant agreement no. 611146

Power and Energy Aware Heterogeneous Computing Platform

During the last decade, wireless technologies have experienced significant development, most notably in the form of mobile cellular radio evolution from GSM to UMTS/HSPA and thereon to Long-Term Evolution (LTE) for increasing the capacity and speed of wireless data networks. Considering the real-time constraints of the new wireless standards and their demands for parallel processing, reconfigurable architectures and in particular, multicore platforms are part of the most successful platforms due to providing high computational parallelism and throughput. In addition to that, by moving toward Internet-of-Things (IoT), the number of wireless sensors and IP-based high throughput network routers is growing at a rapid pace. Despite all the progression in IoT, due to power and energy consumption, a single chip platform for providing multiple communication standards and a large processing bandwidth is still missing.The strong demand for performing different sets of operations by the embedded systems and increasing the computational performance has led to the use of heterogeneous multicore architectures with the help of accelerators for computationally-intensive data-parallel tasks acting as coprocessors. Currently, highly heterogeneous systems are the most power-area efficient solution for performing complex signal processing systems. Additionally, the importance of IoT has increased significantly the need for heterogeneous and reconfigurable platforms.On the other hand, subsequent to the breakdown of the Dennardian scaling and due to the enormous heat dissipation, the performance of a single chip was obstructed by the utilization wall since all cores cannot be clocked at their maximum operating frequency. Therefore, a thermal melt-down might be happened as a result of high instantaneous power dissipation. In this context, a large fraction of the chip, which is switched-off (Dark) or operated at a very low frequency (Dim) is called Dark Silicon. The Dark Silicon issue is a constraint for the performance of computers, especially when the up-coming IoT scenario will demand a very high performance level with high energy efficiency. Among the suggested solution to combat the problem of Dark-Silicon, the use of application-specific accelerators and in particular Coarse-Grained Reconfigurable Arrays (CGRAs) are the main motivation of this thesis work.This thesis deals with design and implementation of Software Defined Radio (SDR) as well as High Efficiency Video Coding (HEVC) application-specific accelerators for computationally intensive kernels and data-parallel tasks. One of the most important data transmission schemes in SDR due to its ability of providing high data rates is Orthogonal Frequency Division Multiplexing (OFDM). This research work focuses on the evaluation of Heterogeneous Accelerator-Rich Platform (HARP) by implementing OFDM receiver blocks as designs for proof-of-concept. The HARP template allows the designer to instantiate a heterogeneous reconfigurable platform with a very large amount of custom-tailored computational resources while delivering a high performance in terms of many high-level metrics. The availability of this platform lays an excellent foundation to investigate techniques and methods to replace the Dark or Dim part of chip with high-performance silicon dissipating very low power and energy. Furthermore, this research work is also addressing the power and energy issues of the embedded computing systems by tailoring the HARP for self-aware and energy-aware computing models. In this context, the instantaneous power dissipation and therefore the heat dissipation of HARP are mitigated on FPGA/ASIC by using Dynamic Voltage and Frequency Scaling (DVFS) to minimize the dark/dim part of the chip. Upgraded HARP for self-aware and energy-aware computing can be utilized as an energy-efficient general-purpose transceiver platform that is cognitive to many radio standards and can provide high throughput while consuming as little energy as possible. The evaluation of HARP has shown promising results, which makes it a suitable platform for avoiding Dark Silicon in embedded computing platforms and also for diverse needs of IoT communications.In this thesis, the author designed the blocks of OFDM receiver by crafting templatebased CGRA devices and then attached them to HARP’s Network-on-Chip (NoC) nodes. The performance of application-specific accelerators generated from templatebased CGRAs, the performance of the entire platform subsequent to integrating the CGRA nodes on HARP and the NoC traffic are recorded in terms of several highlevel performance metrics. In evaluating HARP on FPGA prototype, it delivers a performance of 0.012 GOPS/mW. Because of the scalability and regularity in HARP, the author considered its value as architectural constant. In addition to showing the gain and the benefits of maximizing the number of reconfigurable processing resources on a platform in comparison to the scaled performance of several state-of-the-art platforms, HARP’s architectural constant ensures application-independent figure of merit. HARP is further evaluated by implementing various sizes of Discrete Cosine transform (DCT) and Discrete Sine Transform (DST) dedicated for HEVC standard, which showed its ability to sustain Full HD 1080p format at 30 fps on FPGA. The author also integrated self-aware computing model in HARP to mitigate the power dissipation of an OFDM receiver. In the case of FPGA implementation, the total power dissipation of the platform showed 16.8% reduction due to employing the Feedback Control System (FCS) technique with Dynamic Frequency Scaling (DFS). Furthermore, by moving to ASIC technology and scaling both frequency and voltage simultaneously, significant dynamic power reduction (up to 82.98%) was achieved, which proved the DFS/DVFS techniques as one step forward to mitigate the Dark Silicon issue

Novel DVFS Methodologies For Power-Efficient Mobile MPSoC

Low power mobile computing systems such as smartphones and wearables have become an integral part of our daily lives and are used in various ways to enhance our daily lives. Majority of modern mobile computing systems are powered by multi-processor System-on-a-Chip (MPSoC), where multiple processing elements are utilized on a single chip. Given the fact that these devices are battery operated most of the times, thus, have limited power supply and the key challenges include catering for performance while reducing the power consumption. Moreover, the reliability in terms of lifespan of these devices are also affected by the peak thermal behaviour on the device, which retrospectively also make such devices vulnerable to temperature side-channel attack. This thesis is concerned with performing Dynamic Voltage and Frequency Scaling (DVFS) on different processing elements such as CPU & GPU, and memory unit such as RAM to address the aforementioned challenges. Firstly, we design a Computer Vision based machine learning technique to classify applications automatically into different categories of workload such that DVFS could be performed on the CPU to reduce the power consumption of the device while executing the application. Secondly, we develop a reinforcement learning based agent to perform DVFS on CPU and GPU while considering the user's interaction with such devices to optimize power consumption and thermal behaviour. Next, we develop a heuristic based automated agent to perform DVFS on CPU, GPU and RAM to optimize the same while executing an application. Finally, we explored the affect of DVFS on CPUs leading to vulnerabilities against temperature side-channel attack and hence, we also designed a methodology to secure against such attack while improving the reliability in terms of lifespan of such devices

Mixed Criticality Systems - A Review : (13th Edition, February 2022)

This review covers research on the topic of mixed criticality systems that has been published since Vestal’s 2007 paper. It covers the period up to end of 2021. The review is organised into the following topics: introduction and motivation, models, single processor analysis (including job-based, hard and soft tasks, fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, related topics, realistic models, formal treatments, systems issues, industrial practice and research beyond mixed-criticality. A list of PhDs awarded for research relating to mixed-criticality systems is also included