Applications and case studies in oil refineries

The widespread adoption of wireless systems for industrial automation calls for the development of efficient tools for virtual planning of network deployments similarly as done for conventional Fieldbus and wired systems. In industrial sites the radio signal propagation is subject to blockage due to highly dense metallic structures. Network planning should therefore account for the number and the density of the 3D obstructions surrounding each link. In this paper we address the problem of wireless node deployment in wireless industrial networks, with special focus on WirelessHART IEC 62591 and ISA SP100 IEC 62734 standards. The goal is to optimize the network connectivity and develop an effective tool that can work in complex industrial sites characterized by severe obstructions. The proposed node deployment approach is validated through a case study in an oil refinery environment. It includes an ad-hoc simulation environment (RFSim tool) that implements the proposed network planning approach using 2D models of the plant, providing connectivity information based on user-defined deployment configurations. Simulation results obtained using the proposed simulation environment were validated by on-site measurements

Average Load Distance (ALD) radio communication model for wireless sensor networks

The lifetime of network is one of the most critical issues that have to be considered in the application of wireless sensor networks. The network nodes are battery powered and remain operational as long as they can transmit the sensed data to the processing (sink) node. The main energy consumption of sensor node can be attributed to the task of data transmission to sink node or cluster head. Hence, conserving energy in transmitting data shall maximize functional life of the wireless networks. In this paper we proposed a computationally efficient Average Load Distance (ALD) communication model for forwarding data from sensor to the cluster head. Experiment results indicate that the proposed model can be up to 88% more efficient over direct mode of communication, in respect of per-round maximum energy consumption. An application study shows that ALD can save up to 89% of wireless sensor networks operational cost when compared to direct mode transmission

Internet protocol over wireless sensor networks, from myth to reality

Internet Protocol (IP) is a standard network layer protocol of the Internet architecture, allowing communication among heterogeneous networks. For a given network to be accessible from the Internet it must have a router that complies with this protocol. Wireless sensor networks have many smart sensing nodes with computational, communication and sensing capabilities. Such smart sensors cooperate to gather relevant data and present it to the user. The connection of sensor networks and the Internet has been realized using gateway or proxy- based approaches. Historically, several routing protocols were specifically created, discarding IP. However, recent research, prototypes and even implementation tools show that it is possible to combine the advantages of IP access with sensor networks challenges, with a major contribution from the 6LoWPAN Working Group. This paper presents the advantages and challenges of IP on sensor networks, surveys the state-of-art with some implementation examples, and points further research topics in this area

Tackling Mobility in Low Latency Deterministic Multihop IEEE 802.15.4e Sensor Network

Providing reliable services for low latency (LL) applications within the IoT context is a challenging issue. Several wireless sensor network (WSN) applications require deterministic systems that ensure a reliable and low latency aggregation service. The IEEE 802.15.4e standard, which is considered as the backbone of the IoT regarding WSN, has presented the low-latency deterministic network mode (LLDN) that can fulfil the major requirements of low latency applications. Meanwhile, several LL applications, for example in the automotive industry, demand the support of sensor node mobility which in turn affects network performance. Node mobility triggers several dissociations from the network that will increase latency and degrade node throughput. In this paper, we investigate the impact of node mobility over the LLDN mode while defining key factors that maximize latency and degrade throughput. In addition, an enhanced version of the LLDN mode is presented and evaluated that supports node mobility while maintaining the targeted limits of LL application requirements. The proposed mobility aware (MA-LLDN) technique manages to reduce the dissociation overhead by a factor of 75% while the packet delivery ratio (PDR) has been enhanced by 30%. Furthermore, this paper presents an analytical model that provides a snapshot of the tradeoff process between different metrics in the IEEE 802.15.4e LLDN design, which must be considered prior network deployment in mobile LL applications

Reliable and Energy Efficient Network Protocols for Wireless Body Area Networks

In a wireless Body Area Network (WBAN) various sensors are attached on clothing, on the body or are even implanted under the skin. The wireless nature of the network and the wide variety of sensors offers numerous new, practical and innovative applications. A motivating example can be found in the world of health monitoring. The sensors of the WBAN measure for example the heartbeat, the body temperature or record a prolonged electrocardiogram. Using a WBAN, the patient experiences a greater physical mobility and is no longer compelled to stay in a hospital. A WBAN imposes the networks some strict and specific requirements. The devices are tiny, leaving only limited space for a battery. It is therefore of uttermost importance to restrict the energy consumption in the network. A possible solution is the development of energy efficient protocols that regulate the communication between the radios. Further, it is also important to consider the reliability of the communication. The data sent contains medical information and one has to make sure that it is correctly received at the personal device. It is not allowed that a critical message gets lost. In addition, a WBAN has to support the heterogeneity of its devices. This thesis focuses on the development of energy efficient and reliable network protocols for WBANs. Considered solutions are the use of multi-hop communication and the improved interaction between the different network layers. Mechanisms to reduce the energy consumption and to grade up the reliability of the communication are presented. In a first step, the physical layer of the communication near the human body is studied and investigated. The probability of a connection between two nodes on the body is modeled and used to investigate which network topologies can be considered as the most energy efficient and reliable. Next, MOFBAN, a lightweight framework for network architecture is presented. Finally, CICADA is presented: a new cross layer protocol for WBANs that both handles channel medium access and routing

Wireless Sensor Networks

The aim of this book is to present few important issues of WSNs, from the application, design and technology points of view. The book highlights power efficient design issues related to wireless sensor networks, the existing WSN applications, and discusses the research efforts being undertaken in this field which put the reader in good pace to be able to understand more advanced research and make a contribution in this field for themselves. It is believed that this book serves as a comprehensive reference for graduate and undergraduate senior students who seek to learn latest development in wireless sensor networks

Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment

Scenario Based Study of On-demand reactive routing protocol for IEEE-802.11 and 802.15.4 standards

Routing data from source to destination is hard in Mobile Ad-Hoc Networks (MANET) due to the mobility of the network elements and lack of central administration. The main method for evaluating the performance of MANETs is simulation. In this paper performance of Ad-hoc On-demand Distance Vector (AODV) reactive routing protocol is studied by considering IEEE 802.11 and IEEE 802.15.4 standards. Metrics like average end-to-end delay, packet delivery ratio, total bytes received and throughput are considered for investigating simulation scenario by varying network size with 10 mps node mobility. Also simulation has been carried out by varying mobility for scenario with 50 nodes