A review of relay network on UAVS for enhanced connectivity

One of the best evolution in technology breakthroughs is the Unmanned Aerial Vehicle (UAV). This aerial system is able to perform the mission in an agile environment and can reach the hard areas to perform the tasks autonomously. UAVs can be used in post-disaster situations to estimate damages, to monitor and to respond to the victims. The Ground Control Station can also provide emergency messages and ad-hoc communication to the Mobile Users of the disaster-stricken community using this network. A wireless network can also extend its communication range using UAV as a relay. Major requirements from such networks are robustness, scalability, energy efficiency and reliability. In general, UAVs are easy to deploy, have Line of Sight options and are flexible in nature. However, their 3D mobility, energy constraints, and deployment environment introduce many challenges. This paper provides a discussion of basic UAV based multi-hop relay network architecture and analyses their benefits, applications, and tradeoffs. Key design considerations and challenges are investigated finding fundamental issues and potential research directions to exploit them. Finally, analytical tools and frameworks for performance optimizations are presented

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards and products, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa

Machine Learning for Unmanned Aerial System (UAS) Networking

Fueled by the advancement of 5G new radio (5G NR), rapid development has occurred in many fields. Compared with the conventional approaches, beamforming and network slicing enable 5G NR to have ten times decrease in latency, connection density, and experienced throughput than 4G long term evolution (4G LTE). These advantages pave the way for the evolution of Cyber-physical Systems (CPS) on a large scale. The reduction of consumption, the advancement of control engineering, and the simplification of Unmanned Aircraft System (UAS) enable the UAS networking deployment on a large scale to become feasible. The UAS networking can finish multiple complex missions simultaneously. However, the limitations of the conventional approaches are still a big challenge to make a trade-off between the massive management and efficient networking on a large scale. With 5G NR and machine learning, in this dissertation, my contributions can be summarized as the following: I proposed a novel Optimized Ad-hoc On-demand Distance Vector (OAODV) routing protocol to improve the throughput of Intra UAS networking. The novel routing protocol can reduce the system overhead and be efficient. To improve the security, I proposed a blockchain scheme to mitigate the malicious basestations for cellular connected UAS networking and a proof-of-traffic (PoT) to improve the efficiency of blockchain for UAS networking on a large scale. Inspired by the biological cell paradigm, I proposed the cell wall routing protocols for heterogeneous UAS networking. With 5G NR, the inter connections between UAS networking can strengthen the throughput and elasticity of UAS networking. With machine learning, the routing schedulings for intra- and inter- UAS networking can enhance the throughput of UAS networking on a large scale. The inter UAS networking can achieve the max-min throughput globally edge coloring. I leveraged the upper and lower bound to accelerate the optimization of edge coloring. This dissertation paves a way regarding UAS networking in the integration of CPS and machine learning. The UAS networking can achieve outstanding performance in a decentralized architecture. Concurrently, this dissertation gives insights into UAS networking on a large scale. These are fundamental to integrating UAS and National Aerial System (NAS), critical to aviation in the operated and unmanned fields. The dissertation provides novel approaches for the promotion of UAS networking on a large scale. The proposed approaches extend the state-of-the-art of UAS networking in a decentralized architecture. All the alterations can contribute to the establishment of UAS networking with CPS

Handling Spontaneous Traffic Variations in 5G+ via Offloading onto mmWave-Capable UAV `Bridges'

Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs traveling over the area of interest to relieve congestion in 5G+ systems under spontaneous traffic fluctuations. To this end, we assess two inherently different offloading schemes, named routed and controlled UAV `bridging'. Using the tools of renewal theory and stochastic geometry, we analytically characterize these schemes in terms of the fraction of traffic demand that can be offloaded onto the UAV `bridge' as our parameter of interest. This framework accounts for the unique features of millimeter-wave (mmWave) radio propagation and city deployment types with potential line-of-sight (LoS) link blockage by buildings. We also introduce enhancements to the proposed schemes that significantly improve the offloading gains. Our findings offer evidence that the UAV `bridges' may be used for efficient traffic offloading in various urban scenarios.Comment: This work has been accepted for publication in the IEEE Transactions on Vehicular Technolog

UAV-enabled wireless power transfer with base station charging and UAV power consumption

Wireless power transfer (WPT) is a promising charging technology for battery-limited sensors. In this paper, we study the use of an unmanned aerial vehicle (UAV) as a charger for WPT. Unlike the previous works, our study takes into account the power consumption of the UAV (power consumption during hovering and flight), the charging process from a base station (BS) to the UAV and the conversion loss of the energy harvester. Both one-dimensional (1D) and two-dimensional (2D) WPT systems are considered. The sum-energy received by all sensors is maximized to find the optimal strategy for UAV deployment. Two different charging schemes are proposed. Numerical results show that the sum-energy received by all sensors is determined by sensors' topology, the flight speed of the UAV and the transmit power. They also show that, when the BS charging process and the UAV power consumption are considered in the optimization, the optimal location of the UAV in the 1D and 2D WPT systems is closer to the BS than in the previous works that ignore these two practical factors