A Power-Aware Framework for Executing Streaming Programs on Networks-on-Chip

Nilesh Karavadara, Simon Folie, Michael Zolda, Vu Thien Nga Nguyen, Raimund Kirner, 'A Power-Aware Framework for Executing Streaming Programs on Networks-on-Chip'. Paper presented at the Int'l Workshop on Performance, Power and Predictability of Many-Core Embedded Systems (3PMCES'14), Dresden, Germany, 24-28 March 2014.Software developers are discovering that practices which have successfully served single-core platforms for decades do no longer work for multi-cores. Stream processing is a parallel execution model that is well-suited for architectures with multiple computational elements that are connected by a network. We propose a power-aware streaming execution layer for network-on-chip architectures that addresses the energy constraints of embedded devices. Our proof-of-concept implementation targets the Intel SCC processor, which connects 48 cores via a network-on- chip. We motivate our design decisions and describe the status of our implementation

Dynamic Voltage and Frequency Scaling for Wireless Network-on-Chip

Previously, research and design of Network-on-Chip (NoC) paradigms where mainly focused on improving the performance of the interconnection networks. With emerging wide range of low-power applications and energy constrained high-performance applications, it is highly desirable to have NoCs that are highly energy efficient without incurring performance penalty. In the design of high-performance massive multi-core chips, power and heat have become dominant constrains. Increased power consumption can raise chip temperature, which in turn can decrease chip reliability and performance and increase cooling costs. It was proven that Small-world Wireless Network-on-Chip (SWNoC) architecture which replaces multi-hop wire-line path in a NoC by high-bandwidth single hop long range wireless links, reduces the overall energy dissipation when compared to wire-line mesh-based NoC architecture. However, the overall energy dissipation of the wireless NoC is still dominated by wire-line links and switches (buffers). Dynamic Voltage Scaling is an efficient technique for significant power savings in microprocessors. It has been proposed and deployed in modern microprocessors by exploiting the variance in processor utilization. On a Network-on-Chip paradigm, it is more likely that the wire-line links and buffers are not always fully utilized even for different applications. Hence, by exploiting these characteristics of the links and buffers over different traffic, DVFS technique can be incorporated on these switches and wire-line links for huge power savings. In this thesis, a history based DVFS mechanism is proposed. This mechanism uses the past utilization of the wire-line links & buffers to predict the future traffic and accordingly tune the voltage and frequency for the links and buffers dynamically for each time window. This mechanism dynamically minimizes the power consumption while substantially maintaining a high performance over the system. Performance analysis on these DVFS enabled Wireless NoC shows that, the overall energy dissipation is improved by around 40% when compared Small-world Wireless NoCs

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

Automatic synthesis and optimization of chip multiprocessors

The microprocessor technology has experienced an enormous growth during the last decades. Rapid downscale of the CMOS technology has led to higher operating frequencies and performance densities, facing the fundamental issue of power dissipation. Chip Multiprocessors (CMPs) have become the latest paradigm to improve the power-performance efficiency of computing systems by exploiting the parallelism inherent in applications. Industrial and prototype implementations have already demonstrated the benefits achieved by CMPs with hundreds of cores.CMP architects are challenged to take many complex design decisions. Only a few of them are:- What should be the ratio between the core and cache areas on a chip?- Which core architectures to select?- How many cache levels should the memory subsystem have?- Which interconnect topologies provide efficient on-chip communication?These and many other aspects create a complex multidimensional space for architectural exploration. Design Automation tools become essential to make the architectural exploration feasible under the hard time-to-market constraints. The exploration methods have to be efficient and scalable to handle future generation on-chip architectures with hundreds or thousands of cores.Furthermore, once a CMP has been fabricated, the need for efficient deployment of the many-core processor arises. Intelligent techniques for task mapping and scheduling onto CMPs are necessary to guarantee the full usage of the benefits brought by the many-core technology. These techniques have to consider the peculiarities of the modern architectures, such as availability of enhanced power saving techniques and presence of complex memory hierarchies.This thesis has several objectives. The first objective is to elaborate the methods for efficient analytical modeling and architectural design space exploration of CMPs. The efficiency is achieved by using analytical models instead of simulation, and replacing the exhaustive exploration with an intelligent search strategy. Additionally, these methods incorporate high-level models for physical planning. The related contributions are described in Chapters 3, 4 and 5 of the document.The second objective of this work is to propose a scalable task mapping algorithm onto general-purpose CMPs with power management techniques, for efficient deployment of many-core systems. This contribution is explained in Chapter 6 of this document.Finally, the third objective of this thesis is to address the issues of the on-chip interconnect design and exploration, by developing a model for simultaneous topology customization and deadlock-free routing in Networks-on-Chip. The developed methodology can be applied to various classes of the on-chip systems, ranging from general-purpose chip multiprocessors to application-specific solutions. Chapter 7 describes the proposed model.The presented methods have been thoroughly tested experimentally and the results are described in this dissertation. At the end of the document several possible directions for the future research are proposed

Simulating Execution Time and Power Consumption of Real-Time Tasks on Embedded Platforms

In this paper, we present PARTSim, an open-source power/thermal-aware simulator for embedded real-time systems. This tool is a fork of the well-known RTSim simulator, which can simulate the timing behavior of a set of real-time tasks with various characteristics when running on a multi-processor platform in presence of a number of real-time scheduling policies. PARTSim extends the functionality of RTSim by introducing support for power-aware embedded platforms exhibiting frequency scaling and specific architectural patterns like the ARM big.LITTLE and DynamIQ ones. Experimental results that compare simulated data against execution profiles collected on real platforms show a simulation error under 10 % for both execution time and power consumption at 90th percentile when simulating the effects of DVFS