2,242 research outputs found
Asynchronous Data Processing Platforms for Energy Efficiency, Performance, and Scalability
The global technology revolution is changing the integrated circuit industry from the one driven by performance to the one driven by energy, scalability and more-balanced design goals. Without clock-related issues, asynchronous circuits enable further design tradeoffs and in operation adaptive adjustments for energy efficiency. This dissertation work presents the design methodology of the asynchronous circuit using NULL Convention Logic (NCL) and multi-threshold CMOS techniques for energy efficiency and throughput optimization in digital signal processing circuits. Parallel homogeneous and heterogeneous platforms implementing adaptive dynamic voltage scaling (DVS) based on the observation of system fullness and workload prediction are developed for balanced control of the performance and energy efficiency. Datapath control logic with NULL Cycle Reduction (NCR) and arbitration network are incorporated in the heterogeneous platform for large scale cascading. The platforms have been integrated with the data processing units using the IBM 130 nm 8RF process and fabricated using the MITLL 90 nm FDSOI process. Simulation and physical testing results show the energy efficiency advantage of asynchronous designs and the effective of the adaptive DVS mechanism in balancing the energy and performance in both platforms
Design and Analysis of an Adaptive Asynchronous System Architecture for Energy Efficiency
Power has become a critical design parameter for digital CMOS integrated circuits. With performance still garnering much concern, a central idea has emerged: minimizing power consumption while maintaining performance. The use of dynamic voltage scaling (DVS) with parallelism has shown to be an effective way of saving power while maintaining performance. However, the potency of DVS and parallelism in traditional, clocked synchronous systems is limited because of the strict timing requirements such systems must comply with. Delay-insensitive (DI) asynchronous systems have the potential to benefit more from these techniques due to their flexible timing requirements and high modularity. This dissertation presents the design and analysis of a real-time adaptive DVS architecture for paralleled Multi-Threshold NULL Convention Logic (MTNCL) systems. Results show that energy-efficient systems with low area overhead can be created using this approach
Low power predictable memory and processing architectures
Great demand in power optimized devices shows promising economic potential and draws lots of attention in industry and research area. Due to the continuously shrinking CMOS process, not only dynamic power but also static power has emerged as a big concern in power reduction. Other than power optimization, average-case power estimation is quite significant for power budget allocation but also challenging in terms of time and effort. In this thesis, we will introduce a methodology to support modular quantitative analysis in order to estimate average power of circuits, on the basis of two concepts named Random Bag Preserving and Linear Compositionality. It can shorten simulation time and sustain high accuracy, resulting in increasing the feasibility of power estimation of big systems. For power saving, firstly, we take advantages of the low power characteristic of adiabatic logic and asynchronous logic to achieve ultra-low dynamic and static power. We will propose two memory cells, which could run in adiabatic and non-adiabatic mode. About 90% dynamic power can be saved in adiabatic mode when compared to other up-to-date designs. About 90% leakage power is saved. Secondly, a novel logic, named Asynchronous Charge Sharing Logic (ACSL), will be introduced. The realization of completion detection is simplified considerably. Not just the power reduction improvement, ACSL brings another promising feature in average power estimation called data-independency where this characteristic would make power estimation effortless and be meaningful for modular quantitative average case analysis. Finally, a new asynchronous Arithmetic Logic Unit (ALU) with a ripple carry adder implemented using the logically reversible/bidirectional characteristic exhibiting ultra-low power dissipation with sub-threshold region operating point will be presented. The proposed adder is able to operate multi-functionally
Dynamic Power Management for Neuromorphic Many-Core Systems
This work presents a dynamic power management architecture for neuromorphic
many core systems such as SpiNNaker. A fast dynamic voltage and frequency
scaling (DVFS) technique is presented which allows the processing elements (PE)
to change their supply voltage and clock frequency individually and
autonomously within less than 100 ns. This is employed by the neuromorphic
simulation software flow, which defines the performance level (PL) of the PE
based on the actual workload within each simulation cycle. A test chip in 28 nm
SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled
from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct
PLs. By measurement of three neuromorphic benchmarks it is shown that the total
PE power consumption can be reduced by 75%, with 80% baseline power reduction
and a 50% reduction of energy per neuron and synapse computation, all while
maintaining temporary peak system performance to achieve biological real-time
operation of the system. A numerical model of this power management model is
derived which allows DVFS architecture exploration for neuromorphics. The
proposed technique is to be used for the second generation SpiNNaker
neuromorphic many core system
Energy autonomous systems : future trends in devices, technology, and systems
The rapid evolution of electronic devices since the beginning of the nanoelectronics era has brought about exceptional computational power in an ever shrinking system footprint. This has enabled among others the wealth of nomadic battery powered wireless systems (smart phones, mp3 players, GPS, …) that society currently enjoys. Emerging integration technologies enabling even smaller volumes and the associated increased functional density may bring about a new revolution in systems targeting wearable healthcare, wellness, lifestyle and industrial monitoring applications
Recommended from our members
Methods to improve the reliability and resiliency of near/sub-threshold digital circuits
Energy consumption is one of the primary bottlenecks to both large and small scale modern compute platforms. Reducing the operating voltage of digital circuits to voltages where the supply voltage is near or below the threshold of the transistors has recently gained attention as a method to reduce the energy required for computations by as much as 6 times. However, when operating at near/sub-threshold voltages (where the supply voltage is near or below the threshold of the transistors), imperfections in transistor manufacturing, changes in temperature, and other difficult-to-predict factors cause wide variations in the timing of Complementary Metal-Oxide Semiconductor (CMOS) circuits due to an increased sensitivity at lower voltages. These increased variations result in poor aggregate performance and cause increased rates of error occurrence in computation.
This work introduces several new methods to improve the reliability of near/sub-threshold circuits. The first is a design automation technique that is used to aid in low-voltage digital standard cell synthesis. Second, two circuit-level techniques are also introduced that aim to improve the reliability and resiliency of digital circuits by means of completion/error detection. These techniques are shown to improve speed and lower energy consumption at low overheads compared to previous methods. Most importantly, these circuit-level methods are specifically designed to operate at low voltages and can themselves tolerate variations and operation in harsh environments. Finally, a test-chip prototype designed in 65nm-CMOS demonstrates the practicality and feasibility of a proposed current sensing error detector
Design, analysis and implementation of voltage sensor for power-constrained systems
PhD ThesisThanks to an extensive effort by the global research community, the electronic technology has significantly matured over the last decade. This technology has enabled certain operations which humans could not otherwise easily perform. For instance, electronic systems can be used to perform sensing, monitoring and even control operations in environments such as outer space, underground, under the sea or even inside the human body. The main difficulty for electronics operating in these environments is access to a reliable and permanent source of energy. Using batteries as the immediate solution for this problem has helped to provide energy for limited periods of time; however, regular maintenance and replacement are required. Consequently, battery solutions fail wherever replacing them is not possible or operation for long periods is needed. For such cases, researchers have proposed harvesting ambient energy and converting it into an electrical form. An important issue with energy harvesters is that their operation and output power depend critically on the amount of energy they receive and because ambient energy often tends to be sporadic in nature, energy harvesters cannot produce stable or fixed levels of power all of the time. Therefore, electronic devices powered in this way must be capable of adapting their operation to the energy status of the harvester. To achieve this, information on the energy available for use is needed. This can be provided by a sensor capable of measuring voltage. However, stable and fixed voltage and time references are a prerequisite of most traditional voltage measurement devices, but these generally do not exist in energy harvesting environments. A further challenge is that such a sensor also needs to be powered by the energy harvester’s unstable voltage. In this thesis, the design of a reference-free voltage sensor, which can operate with a varying voltage source, is provided based on the capture of a portion of the total energy which is directly related to
II
the energy being sensed. This energy is then used to power a computation which quantifies captured energy over time, with the information directly generated as digital code. The sensor was fabricated in the 180 nm technology node and successfully tested by performing voltage measurements over the range 1.8 V to 0.8 V
An Ultra-Low-Power 75mV 64-Bit Current-Mode Majority-Function Adder
Ultra-low-power circuits are becoming more desirable due to growing portable device markets and they are also becoming more interesting and applicable today in biomedical, pharmacy and sensor networking applications because of the nano-metric scaling and CMOS reliability improvements. In this thesis, three main achievements are presented in ultra-low-power adders. First, a new majority function algorithm for carry and the sum generation is presented. Then with this algorithm and implied new architecture, we achieved a circuit with 75mV supply voltage operation. Last but not least, a 64 bit current-mode majority-function adder based on the new architecture and algorithm is successfully tested at 75mV supply voltage. The circuit consumed 4.5nW or 3.8pJ in one of the worst conditions
Development of a Waveform Sampling ASIC with Femtosecond Timing for a Low Occupancy Vertex Detector.
Ph.D. Thesis. University of Hawaiʻi at Mānoa 2018
- …