CoAP and MQTT Measurements over LoRaWAN

Abstract. Internet of Things (IoT) enables the system of interrelated computing devices such as sensors and actuators. Thus, IoT faces few challenges to execute predefined functionalities during device-to-device communication. Low latency, high bandwidth, privacy, security, reliability, resource and energy efficiency are key challenges in the IoT paradigm. The fundamental requirement includes uninterrupted secure and reliable services. The challenges become even more controversial for low powered IoT devices during information over the long-distance (measured in kilometer) especially when the bandwidth is subject to free of cost. Different network layer supports are required for present Internet of Things (IoT) solutions — from applications at a higher level to media-based support at a lower level. The interoperability of the fragmented IoT solutions are being enabled by various emerging integration platforms. However, Long-Range Wireless Area Network (LoRaWAN) is used to exchange small data packet in such long distance. On the other hand, IoT required suitable communication protocols for power critical IoT devices. Many studies show the possibility of using Message Queue Telemetry Transport (MQTT) and Constrained Application Protocol (CoAP) as two major enabling IoT communication protocols to act as middleware to obtain low power consumption, sporadic transmission, and robustness to interference. The main basis of the thesis work is to measure and analysis the performance of the MQTT protocol over LoRaWAN. To implement the analytical approach, MQTT and CoAP protocols are used as a transport vehicle or interoperability middleware on a full TCP/IP-stack to connect end devices, and data transmit over the LoRaWAN. This thesis performed the analytical performance for different Spreading Factors (SF) or Data Rates (DR) along with different payload sizes (the message length) over LoRaWAN by using MQTT and CoAP protocols. In LoRaWAN, the Receive_Delay1 and Receive_Delay2, the minimum time duration needed to establish an MQTT connection is one second for Receive_Delay1, while the maximum is two seconds for Receive_Delay2. The analysis shows for uplink and downlink time and proposes various important facts for future aspects

Secure communication in IP-based wireless sensor network via a trusted gateway

As the IP-integration of wireless sensor networks enables end-to-end interactions, solutions to appropriately secure these interactions with hosts on the Internet are necessary. At the same time, burdening wireless sensors with heavy security protocols should be avoided. While Datagram TLS (DTLS) strikes a good balance between these requirements, it entails a high cost for setting up communication sessions. Furthermore, not all types of communication have the same security requirements: e.g. some interactions might only require authorization and do not need confidentiality. In this paper we propose and evaluate an approach that relies on a trusted gateway to mitigate the high cost of the DTLS handshake in the WSN and to provide the flexibility necessary to support a variety of security requirements. The evaluation shows that our approach leads to considerable energy savings and latency reduction when compared to a standard DTLS use case, while requiring no changes to the end hosts themselves

Security for the Industrial IoT: The Case for Information-Centric Networking

Industrial production plants traditionally include sensors for monitoring or documenting processes, and actuators for enabling corrective actions in cases of misconfigurations, failures, or dangerous events. With the advent of the IoT, embedded controllers link these `things' to local networks that often are of low power wireless kind, and are interconnected via gateways to some cloud from the global Internet. Inter-networked sensors and actuators in the industrial IoT form a critical subsystem while frequently operating under harsh conditions. It is currently under debate how to approach inter-networking of critical industrial components in a safe and secure manner. In this paper, we analyze the potentials of ICN for providing a secure and robust networking solution for constrained controllers in industrial safety systems. We showcase hazardous gas sensing in widespread industrial environments, such as refineries, and compare with IP-based approaches such as CoAP and MQTT. Our findings indicate that the content-centric security model, as well as enhanced DoS resistance are important arguments for deploying Information Centric Networking in a safety-critical industrial IoT. Evaluation of the crypto efforts on the RIOT operating system for content security reveal its feasibility for common deployment scenarios.Comment: To be published at IEEE WF-IoT 201

The Road Ahead for Networking: A Survey on ICN-IP Coexistence Solutions

In recent years, the current Internet has experienced an unexpected paradigm shift in the usage model, which has pushed researchers towards the design of the Information-Centric Networking (ICN) paradigm as a possible replacement of the existing architecture. Even though both Academia and Industry have investigated the feasibility and effectiveness of ICN, achieving the complete replacement of the Internet Protocol (IP) is a challenging task. Some research groups have already addressed the coexistence by designing their own architectures, but none of those is the final solution to move towards the future Internet considering the unaltered state of the networking. To design such architecture, the research community needs now a comprehensive overview of the existing solutions that have so far addressed the coexistence. The purpose of this paper is to reach this goal by providing the first comprehensive survey and classification of the coexistence architectures according to their features (i.e., deployment approach, deployment scenarios, addressed coexistence requirements and architecture or technology used) and evaluation parameters (i.e., challenges emerging during the deployment and the runtime behaviour of an architecture). We believe that this paper will finally fill the gap required for moving towards the design of the final coexistence architecture.Comment: 23 pages, 16 figures, 3 table

IETF standardization in the field of the Internet of Things (IoT): a survey

Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities

Managed ecosystems of networked objects

Small embedded devices such as sensors and actuators will become the cornerstone of the Future Internet. To this end, generic, open and secure communication and service platforms are needed in order to be able to exploit the new business opportunities these devices bring. In this paper, we evaluate the current efforts to integrate sensors and actuators into the Internet and identify the limitations at the level of cooperation of these Internet-connected objects and the possible intelligence at the end points. As a solution, we propose the concept of Managed Ecosystem of Networked Objects, which aims to create a smart network architecture for groups of Internet-connected objects by combining network virtualization and clean-slate end-to-end protocol design. The concept maps to many real-life scenarios and should empower application developers to use sensor data in an easy and natural way. At the same time, the concept introduces many new challenging research problems, but their realization could offer a meaningful contribution to the realization of the Internet of Things

Securing Internet of Things with Lightweight IPsec

Real-world deployments of wireless sensor networks (WSNs) require secure communication. It is important that a receiver is able to verify that sensor data was generated by trusted nodes. In some cases it may also be necessary to encrypt sensor data in transit. Recently, WSNs and traditional IP networks are more tightly integrated using IPv6 and 6LoWPAN. Available IPv6 protocol stacks can use IPsec to secure data exchange. Thus, it is desirable to extend 6LoWPAN such that IPsec communication with IPv6 nodes is possible. It is beneficial to use IPsec because the existing end-points on the Internet do not need to be modified to communicate securely with the WSN. Moreover, using IPsec, true end-to-end security is implemented and the need for a trustworthy gateway is removed. In this paper we provide End-to-End (E2E) secure communication between an IP enabled sensor nodes and a device on traditional Internet. This is the first compressed lightweight design, implementation, and evaluation of 6LoWPAN extension for IPsec on Contiki. Our extension supports both IPsec's Authentication Header (AH) and Encapsulation Security Payload (ESP). Thus, communication endpoints are able to authenticate, encrypt and check the integrity of messages using standardized and established IPv6 mechanisms