158 research outputs found
An Exclusion zone for Massive MIMO With Underlay D2D Communication
Fifth generation networks will incorporate a variety of new features in
wireless networks such as data offloading, D2D communication, and Massive MIMO.
Massive MIMO is specially appealing since it achieves huge gains while enabling
simple processing like MRC receivers. It suffers, though, from a major
shortcoming refereed to as pilot contamination. In this paper we propose a
frame-work in which, a D2D underlaid Massive MIMO system is implemented and we
will prove that this scheme can reduce the pilot contamination problem while
enabling an optimization of the system spectral efficiency. The D2D
communication will help maintain the network coverage while allowing a better
channel estimation to be performed
D6.3 Intermediate system evaluation results
The overall purpose of METIS is to develop a 5G system concept that fulfil s the requirements of the beyond-2020 connected information society and to extend today’s wireless communication systems for new usage cases. First, in this deliverable an updated view on the
overall METIS 5G system concept is presented.
Thereafter, simulation results for the most promising technology components supporting the METIS 5G system concept are reported.
Finally, s
imulation results are presented for
one
relevant
aspect of each Horizontal Topic:
Direct Device
-
to
-
Device Communication, Massive Machine Communication, Moving Networks,
Ultra
-
Dense Networks, and Ultra
-
Reliable Communication.Popovski, P.; Mange, G.; Fertl, P.; Gozálvez - Serrano, D.; Droste, H.; Bayer, N.; Roos, A.... (2014). D6.3 Intermediate system evaluation results. http://hdl.handle.net/10251/7676
D3.2 First performance results for multi -node/multi -antenna transmission technologies
This deliverable describes the current results of the multi-node/multi-antenna technologies
investigated within METIS and analyses the interactions within and outside Work Package 3.
Furthermore, it identifies the most promising technologies based on the current state of
obtained results. This document provides a brief overview of the results in its first part. The second part, namely the Appendix, further details the results, describes the simulation
alignment efforts conducted in the Work Package and the interaction of the Test Cases. The
results described here show that the investigations conducted in Work Package 3
are maturing resulting in valuable innovative solutions for future 5G systems.Fantini. R.; Santos, A.; De Carvalho, E.; Rajatheva, N.; Popovski, P.; Baracca, P.; Aziz, D.... (2014). D3.2 First performance results for multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675
Simu5G – An OMNeT++ library for end-to-end performance evaluation of 5G networks
In this paper we introduce Simu5G, a new OMNeT++-based model library to simulate 5G networks. Si-mu5G allows users to simulate the data plane of 5G New Radio deployments, in an end-to-end perspective and including all protocol layers, making it a valuable tool for researchers and practitioners interested in the performance evaluation of 5G networks and services. We discuss the modelling of the protocol layers, network entities and functions, and validate our abstraction of the physical layer using 3GPP-based sce-narios. Moreover, we show how Simu5G can be used to evaluate Multi-access Edge Computing (MEC) and Cellular Vehicle-to-everything (C-V2X) services offered through a 5G network
Recommended from our members
Integrated cellular and device-to-device networks
textDevice-to-device (D2D) networking enables direct discovery and communication between cellular subscribers that are in proximity, thus bypassing the base stations (BSs). In principle, exploiting direct communication between nearby mobile devices will improve spectrum utilization, overall throughput, and energy consumption, while enabling new peer-to-peer and location-based applications and services. D2D-enabled broadband communication technology is also required by public safety networks that must function when cellular networks are not available. Integrating D2D into cellular networks, however, poses many challenges and risks to the long-standing cellular architecture, which is centered around the BSs. This dissertation identifies outstanding technical challenges in D2D-enabled cellular networks and addresses them with novel models and fundamental analysis. First, this dissertation develops a baseline hybrid network model consisting of both ad hoc nodes and cellular infrastructure. This model uses Poisson point processes to model the random and unpredictable locations of mobile users. It also captures key features of multicast D2D including multicast receiver heterogeneity and retransmissions while being tractable for analytical purpose. Several important multicast D2D metrics including coverage probability, mean number of covered receivers per multicast session, and multicast throughput are analytically characterized under the proposed model. Second, D2D mode selection which means that a potential D2D pair can switch between direct and cellular modes is incorporated into the hybrid network model. The extended model is applied to study spectrum sharing between cellular and D2D communications. Two spectrum sharing models, overlay and underlay, are investigated under a unified analytical framework. Analytical rate expressions are derived and applied to optimize the design of spectrum sharing. It is found that, from an overall mean-rate perspective, both overlay and underlay bring performance improvements (vs. pure cellular). Third, the single-antenna hybrid network model is extended to multi-antenna transmission to study the interplay between massive MIMO (multi-input multiple-output) and underlaid D2D networking. The spectral efficiency of such multi-antenna hybrid networks is investigated under both perfect and imperfect channel state information (CSI) assumptions. Compared to the case without D2D, there is a loss in cellular spectral efficiency due to D2D underlay. With perfect CSI, the loss can be completely overcome if the number of canceled D2D interfering signals is scaled appropriately. With imperfect CSI, in addition to pilot contamination, a new asymptotic underlay contamination effect arises. Finally, motivated by the fact that transmissions in D2D discovery are usually not or imperfectly synchronized, this dissertation studies the effect of asynchronous multicarrier transmission and proposes a tractable signal-to-interference-plus-noise ratio (SINR) model. The proposed model is used to analytically characterize system-level performance of asynchronous wireless networks. The loss from lack of synchronization is quantified, and several solutions are proposed and compared to mitigate the loss.Electrical and Computer Engineerin
LTE Carrier Aggregation Deployment – From Standardization to Deployment
Purpose: The objective of this research was to investigate LTE Carrier Aggregation commercial deployment and how soon it happened after standardization finalization. Because LTE Carrier Aggregation feature was expected to be important feature there is good reason to expect its deployment for real commercial markets.
Â
Theoretical framework: The literature at time when standardization was ongoing predicted and speculated Carrier Aggregation feature as promising deployment selection. However there is room to investigate whether Carrier Aggregation happened shortly after standard specification work finalized.Â
Â
Design/methodology/approach: Used methodology was to gather network operators’ and equipment manufacturers’ intentions for LTE Carrier Aggregation commercial deployment purposes during and after standardization finalization. Information found from public sources where commercial deployment intentions launched by companies.  Â
Â
Findings: The research showed that after and already before standardization finalized there were immediate intentions for LTE Carrier Aggregation deployment. Commercial trials appeared within one year and real commercial deployments appeared within two years from standardization finalization. That means soon deployments in commercial markets when considering deployment in licensed band.
Â
Research, Practical & Social implications: For future works there could be study why not LTE Carrier Aggregation solutions in unlicensed band was not successful and whether there will be changes when going towards 5G standard related deployments.
Â
Originality/value: This article is an academic contribution for innovation feature commercial deployment in telecommunications industry and investigation whether LTE Carrier Aggregation feature deployment happened as soon as expected
Channel Simulators for MmWave and 5G Applications
Along with the tremendous growth of extremely high traffic demand, 5G radio access technology, is becoming the core component to support massive and multifarious connected devices and real-time, and to offer high reliability wireless communications with high data rate. And millimeter-wave (mmWave) range with a huge frequency spectrum from 3 GHz to 300GHz will perfectly meet the multi-gigabit communicative demand. However, mmWave usage also generally brings new challenges, such as coping with high attenuation or path losses.
As an effective method to evaluate the performance of the new concept in communication networks, nowadays, several channel models and simulators have been proposed and developped, such as, WINNER, COST-2100, IMT-Advanced, METIS, NYU Wire-less and QuaDRiGa etc. The thesis goals have been to offer an overview of the advantages and disadvantages of various mmWave channel models existing in the literature, based on the published literature, and to compare based on simulations some of the main features of two selected open-source models, namely the WINNER 2 and QuaDRiGa channel models. In the future, more mmWave channel models are planned to be tested and simulated for a better understanding of their suitability for various mmWave applications
- …