Flexible Baseband Modulator Architecture for Multi-Waveform 5G Communications

The fifth-generation (5G) revolution represents more than a mere performance enhancement of previous generations: it will deeply transform the way humans and/or machines interact, enabling a heterogeneous expansion in the number of use cases and services. Crucial to the realization of this revolution is the design of hardware components characterized by high degrees of flexibility, versatility and resource/power efficiency. This chapter proposes a field-programmable gate array (FPGA)-oriented baseband processing architecture suitable for fast-changing communication environments such as 4G/5G waveform coexistence, noncontiguous carrier aggregation (CA) or centralized cloud radio access network (C-RAN) processing. The proposed architecture supports three 5G waveform candidates and is shown to be upgradable, resource-efficient and cost-effective. Through hardware virtualization, enabled by dynamic partial reconfiguration (DPR), the design space exploration of our architecture exceeds the hardware resources available on the Zynq xc7z020 device. Moreover, dynamic frequency scaling (DFS) enables the runtime adjustment of processing throughput and power reductions by up to 88%. The combined resource overhead for DPR and DFS is very low, and the reconfiguration latency stays two orders of magnitude below the control plane latency requirements proposed for 5G communications

Analysis, characterization and optimization of the energy efficiency on softwarized mobile platforms

Mención Internacional en el título de doctorLa inminente 5ª generación de sistemas móviles (5G) está a punto de revolucionar la industria, trayendo una nueva arquitectura orientada a los nuevos mercados verticales y servicios. Debido a esto, el 5G Infrastructure Public Private Partnership (5G-PPP) ha especificado una lista de Indicadores de Rendimiento Clave (KPI) que todo sistema 5G tiene que soportar, por ejemplo incrementar por 1000 el volumen de datos, de 10 a 100 veces m´as dispositivos conectados o consumos energéticos 10 veces inferiores. Con el fin de conseguir estos requisitos, se espera expandir los despligues actuales usando mas Puntos de Acceso (PoA) incrementando así su densidad con múltiples tecnologías inalámbricas. Esta estrategia de despliegue masivo tiene una contrapartida en la eficiencia energética, generando un conflicto con el KPI de reducir por 10 el consumo energético. En este contexto, la comunidad investigadora ha propuesto nuevos paradigmas para alcanzar los requisitos impuestos para los sistemas 5G, siendo materializados en tecnologías como Redes Definidas por Software (SDN) y Virtualización de Funciones de Red (NFV). Estos nuevos paradigmas son el primer paso hacia la softwarización de los despliegues móviles, incorporando nuevos grados de flexibilidad y reconfigurabilidad de la Red de Acceso Radio (RAN). En esta tesis, presentamos primero un análisis detallado y caracterización de las redes móviles softwarizadas. Consideramos el software como la base de la nueva generación de redes celulares y, por lo tanto, analizaremos y caracterizaremos el impacto en la eficiencia energética de estos sistemas. La primera meta de este trabajo es caracterizar las plataformas software disponibles para Radios Definidas por Software (SDR), centrándonos en las dos soluciones principales de código abierto: OpenAirInterface (OAI) y srsLTE. Como resultado, proveemos una metodología para analizar y caracterizar el rendimiento de estas soluciones en función del uso de la CPU, rendimiento de red, compatibilidad y extensibilidad de dicho software. Una vez hemos entendido qué rendimiento podemos esperar de este tipo de soluciones, estudiamos un prototipo SDR construido con aceleración hardware, que emplea una plataformas basada en FPGA. Este prototipo está diseñado para incluir capacidad de ser consciente de la energía, permiento al sistema ser reconfigurado para minimizar la huella energética cuando sea posible. Con el fin de validar el diseño de nuestro sistema, más tarde presentamos una plataforma para caracterizar la energía que será empleada para medir experimentalmente el consumo energético de dispositivos reales. En nuestro enfoque, realizamos dos tipos de análisis: a pequeña escala de tiempo y a gran escala de tiempo. Por lo tanto, para validar nuestro entorno de medidas, caracterizamos a través de análisis numérico los algoritmos para la Adaptación de la Tasa (RA) en IEEE 802.11, para entonces comparar nuestros resultados teóricos con los experimentales. A continuación extendemos nuestro análisis a la plataforma SDR acelerada por hardware previamente mencionada. Nuestros resultados experimentales muestran que nuestra sistema puede en efecto reducir la huella energética reconfigurando el despligue del sistema. Entonces, la escala de tiempos es elevada y presentamos los esquemas para Recursos bajo Demanda (RoD) en despliegues de red ultra-densos. Esta estrategia está basada en apagar/encender dinámicamente los elementos que forman la red con el fin de reducir el total del consumo energético. Por lo tanto, presentamos un modelo analítico en dos sabores, un modelo exacto que predice el comportamiento del sistema con precisión pero con un alto coste computacional y uno simplificado que es más ligero en complejidad mientras que mantiene la precisión. Nuestros resultados muestran que estos esquemas pueden efectivamente mejorar la eficiencia energética de los despliegues y mantener la Calidad de Servicio (QoS). Con el fin de probar la plausibilidad de los esquemas RoD, presentamos un plataforma softwarizada que sigue el paradigma SDN, OFTEN (OpenFlow framework for Traffic Engineering in mobile Network with energy awareness). Nuestro diseño está basado en OpenFlow con funcionalidades para hacerlo consciente de la energía. Finalmente, un prototipo real con esta plataforma es presentando, probando así la plausibilidad de los RoD en despligues reales.The upcoming 5th Generation of mobile systems (5G) is about to revolutionize the industry, bringing a new architecture oriented to new vertical markets and services. Due to this, the 5G-PPP has specified a list of Key Performance Indicator (KPI) that 5G systems need to support e.g. increasing the 1000 times higher data volume, 10 to 100 times more connected devices or 10 times lower power consumption. In order to achieve these requirements, it is expected to expand the current deployments using more Points of Attachment (PoA) by increasing their density and by using multiple wireless technologies. This massive deployment strategy triggers a side effect in the energy efficiency though, generating a conflict with the “10 times lower power consumption” KPI. In this context, the research community has proposed novel paradigms to achieve the imposed requirements for 5G systems, being materialized in technologies such as Software Defined Networking (SDN) and Network Function Virtualization (NFV). These new paradigms are the first step to softwarize the mobile network deployments, enabling new degrees of flexibility and reconfigurability of the Radio Access Network (RAN). In this thesis, we first present a detailed analysis and characterization of softwarized mobile networking. We consider software as a basis for the next generation of cellular networks and hence, we analyze and characterize the impact on the energy efficiency of these systems. The first goal of this work is to characterize the available software platforms for Software Defined Radio (SDR), focusing on the two main open source solutions: OAI and srsLTE. As result, we provide a methodology to analyze and characterize the performance of these solutions in terms of CPU usage, network performance, compatibility and extensibility of the software. Once we have understood the expected performance for such platformsc, we study an SDR prototype built with hardware acceleration, that employs a FPGA based platform. This prototype is designed to include energy-awareness capabilites, allowing the system to be reconfigured to minimize the energy footprint when possible. In order to validate our system design, we later present an energy characterization platform that we will employ to experimentally measure the energy consumption of real devices. In our approach, we perform two kind of analysis: at short time scale and large time scale. Thus, to validate our approach in short time scale and the energy framework, we have characterized though numerical analysis the Rate Adaptation (RA) algorithms in IEEE 802.11, and then compare our theoretical results to the obtained ones through experimentation. Next we extend our analysis to the hardware accelerated SDR prototype previously mentioned. Our experimental results show that our system can indeed reduce the energy footprint reconfiguring the system deployment. Then, the time scale of our analysis is elevated and we present Resource-on-Demand (RoD) schemes for ultradense network deployments. This strategy is based on dynamically switch on/off the elements that form the network to reduce the overall energy consumption. Hence, we present a analytic model in two flavors, an exact model that accurately predicts the system behaviour but high computational cost and a simplified one that is lighter in complexity while keeping the accuracy. Our results show that these schemes can effectively enhance the energy efficiency of the deployments and mantaining the Quality of Service (QoS). In order to prove the feasibility of RoD, we present a softwarized platform that follows the SDN paradigm, the OFTEN (Open Flow framework for Traffic Engineering in mobile Networks with energy awareness) framework. Our design is based on OpenFlow with energy-awareness functionalities. Finally, a real prototype of this framework is presented, proving the feasibility of the RoD in real deployments.FP7-CROWD (2013-2015) CROWD (Connectivity management for eneRgy Optimised Wireless Dense networks).-- H2020-Flex5GWare (2015-2017) Flex5GWare (Flexible and efficient hardware/software platforms for 5G network elements and devices).Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Gramaglia , Marco.- Secretario: José Nuñez.- Vocal: Fabrizio Giulian

Datacenter Design for Future Cloud Radio Access Network.

Cloud radio access network (C-RAN), an emerging cloud service that combines the traditional radio access network (RAN) with cloud computing technology, has been proposed as a solution to handle the growing energy consumption and cost of the traditional RAN. Through aggregating baseband units (BBUs) in a centralized cloud datacenter, C-RAN reduces energy and cost, and improves wireless throughput and quality of service. However, designing a datacenter for C-RAN has not yet been studied. In this dissertation, I investigate how a datacenter for C-RAN BBUs should be built on commodity servers. I first design WiBench, an open-source benchmark suite containing the key signal processing kernels of many mainstream wireless protocols, and study its characteristics. The characterization study shows that there is abundant data level parallelism (DLP) and thread level parallelism (TLP). Based on this result, I then develop high performance software implementations of C-RAN BBU kernels in C++ and CUDA for both CPUs and GPUs. In addition, I generalize the GPU parallelization techniques of the Turbo decoder to the trellis algorithms, an important family of algorithms that are widely used in data compression and channel coding. Then I evaluate the performance of commodity CPU servers and GPU servers. The study shows that the datacenter with GPU servers can meet the LTE standard throughput with 4× to 16× fewer machines than with CPU servers. A further energy and cost analysis show that GPU servers can save on average 13× more energy and 6× more cost. Thus, I propose the C-RAN datacenter be built using GPUs as a server platform. Next I study resource management techniques to handle the temporal and spatial traffic imbalance in a C-RAN datacenter. I propose a “hill-climbing” power management that combines powering-off GPUs and DVFS to match the temporal C-RAN traffic pattern. Under a practical traffic model, this technique saves 40% of the BBU energy in a GPU-based C-RAN datacenter. For spatial traffic imbalance, I propose three workload distribution techniques to improve load balance and throughput. Among all three techniques, pipelining packets has the most throughput improvement at 10% and 16% for balanced and unbalanced loads, respectively.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/120825/1/qizheng_1.pd

COGNITIVE RADIO SOLUTION FOR IEEE 802.22

Current wireless systems suffer severe radio spectrum underutilization due to a number of problematic issues, including wasteful static spectrum allocations; fixed radio functionalities and architectures; and limited cooperation between network nodes. A significant number of research efforts aim to find alternative solutions to improve spectrum utilization. Cognitive radio based on software radio technology is one such novel approach, and the impending IEEE 802.22 air interface standard is the first based on such an approach. This standard aims to provide wireless services in wireless regional area network using TV spectrum white spaces. The cognitive radio devices employed feature two fundamental capabilities, namely supporting multiple modulations and data-rates based on wireless channel conditions and sensing a wireless spectrum. Spectrum sensing is a critical functionality with high computational complexity. Although the standard does not specify a spectrum sensing method, the sensing operation has inherent timing and accuracy constraints.This work proposes a framework for developing a cognitive radio system based on a small form factor software radio platform with limited memory resources and processing capabilities. The cognitive radio systems feature adaptive behavior based on wireless channel conditions and are compliant with the IEEE 802.22 sensing constraints. The resource limitations on implementation platforms post a variety of challenges to transceiver configurability and spectrum sensing. Overcoming these fundamental features on small form factors paves the way for portable cognitive radio devices and extends the range of cognitive radio applications.Several techniques are proposed to overcome resource limitation on a small form factor software radio platform based on a hybrid processing architecture comprised of a digital signal processor and a field programmable gate array. Hardware reuse and task partitioning over a number of processing devices are among the techniques used to realize a configurable radio transceiver that supports several communication modes, including modulations and data rates. In particular, these techniques are applied to build configurable modulation architecture and a configurable synchronization. A mode-switching architecture based on circular buffers is proposed to facilitate a reliable transitioning between different communication modes.The feasibility of efficient spectrum sensing based on a compressive sampling technique called "Fast Fourier Sampling" is examined. The configuration parameters are analyzed mathematically, and performance is evaluated using computer simulations for local spectrum sensing applications. The work proposed herein features a cooperative Fast Fourier sampling scheme to extend the narrowband and wideband sensing performance of this compressive sensing technique.The précis of this dissertation establishes the foundation of efficient cognitive radio implementation on small form factor software radio of hybrid processing architecture