Dynamic and efficient point-to-point and point-to-multipoint communications by slicing the optical constellation

Optical Constellation Slicing is proposed to convey heterogenous traffic from a source to multiple destinations, while supporting dynamic capacity allocation. Illustrative numerical results reveal the potential of the proposed scheme, while providing significant cost reduction.The research leading to these results has received funding from the European Community through the MSCA REAL-NET project (G.A. 813144), by the AEI through the IBON project (PID2020-114135RB-I00), and by the ICREA institution.Peer ReviewedPostprint (author's final draft

Adaptive probabilistic shaped modulation for high-capacity free-space optical links

Infrared free-space optics (FSO) provide an attractive solution for ultra-high-capacity wireless communications. However, the full potential of FSO is still being hindered by the apparent random fluctuations on the received optical power, which can be triggered by external factors such as atmospheric turbulence, weather instability, and pointing errors. Through the analysis of long-term experimental measurements, we identify the existence of significant time-domain memory in outdoor FSO links, which is found to be particularly strong under rainy weather conditions. Following this observation, we demonstrate that these memory effects can be effectively utilized to design accurate FSO channel estimation algorithms. Taking advantage of the arbitrary bit-rate granularity provided by probabilistic constellation shaping (PCS), and resorting to a simple moving average channel estimator, we demonstrate 400G+ transmission over a seamless fiber-FSO 55-m link with enhanced resilience towards adverse weather conditions. Comparing with unsupervised fixed modulation, we demonstrate a significant increase in average bit-rate (>35 Gbps) after continuous measurement over 3 hours, including raining periods

ASIC Design Exploration for DSP and FEC of 400-Gbit/s Coherent Data-Center Interconnect Receivers

We perform exploratory ASIC design of key DSP and FEC units for 400-Gbit/s coherent data-center interconnect receivers. In 22-nm CMOS, the considered units together dissipate 5W, suggesting implementation feasibility in power-constrained form factors

Joint estimation of dynamic polarization and carrier phase with pilot-based adaptive equalizer in PDM-64 QAM transmission system

A pilot-based adaptive equalizer is investigated for high cardinality polarizationdivision-multiplexing quadrature amplitude modulation transmission systems. Pilot symbols are periodically inserted for joint estimation of the dynamic state of polarization (SOP) and carrier phase, in a least mean square (LMS) sense. Compared to decision-directed least mean square (DDLMS) equalization and radially-directed equalization, the proposed equalizer can achieve robust equalization and phase estimation, especially in low optical signal-to-noise ratio (OSNR) scenarios. In an experiment on 56 GBaud PDM-64 QAM transmission over 400 km standard single-mode fiber, we obtained at least 0.35 bit per symbol generalized mutual information (GMI) improvement compared with other training symbol-based equalization when tracking 600 krad/s dynamic SOP. With the joint estimation scheme, the equalization performance will not be compromised even if the SOP speed reaches 600 krad/s or the laser linewidth approaches 2 MHz. For the first time, it is demonstrated that the pilot-based equalizer can track dynamic SOP rotation and compensate for fiber linear impairments without any cycle slips under extreme conditions

Optimized Translucent S-band Transmission in Multi-Band Optical Networks

For multi-band optical networks that encompass the C-, L-, and S-bands, the latter provides the poorest Quality of Transmission (QoT). We have evaluated optimization of the S-band in a multi-band optical network scenario, demonstrating the possibility of increasing overall network capacity in a cost-effective manner

Next-generation High-Capacity Communications with High Flexibility, Efficiency, and Reliability

The objective of this dissertation is to address the flexibility, efficiency and reliability in high-capacity heterogeneous communication systems. We will experimentally investigate the shaping techniques, and further extend them to more diverse and complicated scenarios, which result in more flexible systems. The scenarios include 1) entropy allocation scheme under uneven frequency response for multi-carrier system, 2) fiber-free space optics link using unipolar pairwise distribution, and 3) flexible rate passive optical network with a wide range of received optical powers. Next, we perform efficiency analysis in inter-data center and long-haul communications. We will characterize the impact of the laser linewidth, jitter tones, and the flicker noise on coherent systems with different baud rates and fiber lengths through theoretical analysis, simulation, and experimental validation. The trade-off analysis indicates the importance of setting up frequency noise power spectral density masks to qualify the transceiver laser design. Besides efficiency analysis, we will also work on efficient system architecture and algorithm design. We investigate the combined impact of various hardware impairments using proposed simplified DSP schemes in beyond 800G self-homodyne coherent system. The proposed scheme is very promising for next-generation intra-data center applications. On the other hand, to improve the data efficiency of the nonlinearity correction algorithm in broadband communication systems, we leverage the semi-supervised method and Lasso. Experimental results validate that Lasso can reduce the required pilot symbol number by exploiting the sparsity of the tap coefficients. Semi-supervised method can further enhance the system performance without introducing additional overhead. Last but not least, regarding reliability, we propose and experimentally demonstrate an ultra-reliable integrated millimeter wave and free space optics analog radio over fiber system with algorithm design. The multiple-spectra operation shows superior performance in reliability and sensitivity compared to the conventional systems, even in extreme weather conditions and strong burst interference.Ph.D

Silicon Photonic Platforms and Systems for High-speed Communications

Data communication is a critical component of modern technology in our society. There is an increasing reliance on information being at our fingers tips and we expect a low-latency, high-bandwidth connection to deliver entertainment or enhanced productivity. In order to serve this demand, communications devices are being pressed for smaller form factors, higher data throughput, lower power consumption and lower cost. Similar demands exist in a number of applications including metro/long-haul telecommunications, shorter datacenter links and supercomputing. Silicon photonics promises to be a technology that will solve some of the difficulties with improving communication devices. Building photonics in silicon allows for reuse of the same fabrication technology that is used by the CMOS electronics industry, potentially allowing for large volumes, high yields and low costs. Part I of this thesis details the design of components needed in a high-speed silicon photonic platform to meet the current challenges for high-speed communications. The author’s work in modeling photodetectors resulted in improving photodetector bandwidth from 30 GHz to 67 GHz, the fastest reported at the time of publication. Details regarding the optimization and test of modulators are also presented with the first-reported 50 Gbps modulator at 1310-nm. A large scale parallel channel demonstration of high-speed silicon photonics is then presented showing the potential scalability for silicon photonics systems. A full transceiver requires a number of components other than the photodetector and modulator that are the core active pieces of a silicon photonics platform. Part II includes work on the design and test of silicon photonic components providing functionality beyond the photodetector and modulator. A novel design integrating Metal-Semiconductor Field Effect Transistors (MESFETs) into a silicon photonics platform without process change is shown. This integration enables enhanced control functionality with minimal overhead. The critical final piece for a silicon photonics platform, adding a light source, is demonstrated along with performance results of the resulting tunable, extended C-band laser. In Part III, previous work on an enhanced silicon photonics platform with complementary components is used to build a high-speed integrated coherent link and then tested with a silicon photonics-based tunable laser. The transceiver was shown to operate at 34 Gbaud dual-polarization 16-QAM for a total of 272 Gbps over a single channel. This was the first published demonstration of an integrated coherent where all of the optics were built in a silicon photonics platform

Constellation Shaping in Optical Communication Systems

Exploiting the full-dimensional capacity of coherent optical communication systems is needed to overcome the increasing bandwidth demands of the future Internet. To achieve capacity, both coding and shaping gains are required, and they are, in principle, independent. Therefore it makes sense to study shaping and how it can be achieved in various dimensions and how various shaping schemes affect the whole performance in real systems. This thesis investigates the performance of constellation shaping methods including geometric shaping (GS) and probabilistic shaping (PS) in coherent fiber-optic systems. To study GS, instead of considering machine learning approaches or optimization of irregular constellations in two dimensions, we have explored multidimensional lattice-based constellations. These constellations provide a regular structure with a fast and low-complexity encoding and decoding. In simulations, we show the possibility of transmitting and detecting constellation with a size of more than 10^{28} points which can be done without a look-up table to store the constellation points. Moreover, improved performance in terms of bit error rate, symbol error rate, and transmission reach are demonstrated over the linear additive white Gaussian noise as well as the nonlinear fiber channel compared to QAM formats.Furthermore, we investigate the performance of PS in two separate scenarios, i.e., transmitter impairments and transmission over hybrid systems with on-off keying channels. In both cases, we find that while PS-QAM outperforms the uniform QAM in the linear regime, uniform QAM can achieve better performance at the optimum power in the presence of transmitter or channel nonlinearities