8 research outputs found

    The EnMAP Managed Vegetation Scientific Processor

    Get PDF
    Nach jahrelanger wissenschaftlicher und technischer Vorbereitungszeit wird voraussichtlich Ende des Jahres 2020 der Start der orbitalen Phase einer unbemannten deutschen Weltraum-Mission initiiert. Das Environmental Mapping and Analysis Program (EnMAP) wird an Bord des gleichnamigen Satelliten einen hyperspektralen Sensor zur Erfassung terrestrischer Oberflächen tragen. In den Umweltdisziplinen zur Erforschung von Ökosystemen, landwirtschaftlicher, forstwirtschaftlicher und urbaner Flächen, im Bereich der Küsten- und Inlandsgewässer sowie der Geologie und Bodenkunde bereitete man sich im Vorfeld des Starts auf die kommenden Daten vor. Zwar existiert bereits eine Vielzahl an Algorithmen zur wissenschaftlichen Analyse von spektralen Daten, allerdings ergeben sich auch neue Herausforderungen, da die EnMAP-Mission bislang im weltweiten Kontext der Fernerkundung einzigartig ist. Die Abdeckung des vollen optischen Spektrums (420 nm – 2450 nm) in Verbindung mit einer moderaten räumlichen Auflösung von 30 m und einem hohen Signal-Rausch-Verhältnis von mindestens 180 im kurzwelligen Infrarot und über 400 im sichtbaren Spektrum, ermöglichen eine Aufnahmequalität, die bislang nur von flugzeuggestützten Systemen erreicht werden konnte. Die Bemühungen in dieser Dissertation umfassen Aktivitäten in der wissenschaftlichen Vorbereitungsphase zu agrargeographischen Fragestellungen. Algorithmen und Tools zur Analyse der hyperspektralen Daten werden kostenlos im QGIS-Plugin EnMAP-Box 3 zur Verfügung gestellt. Die drängenden Fragen im Agrarsektor drehen sich hierbei um die Ableitung biochemischer und biophysikalischer Parameter aus Fernerkundungsdaten, weshalb die übergeordnete Problemstellung des Promotionsvorhabens die Entwicklung eines wissenschaftsbasierten EnMAP-Tools für bewirtschaftete Vegetationsflächen (EnMAP Managed Vegetation Scientific Processor) darstellt. Zu Beginn wurde eine umfassende Feldkampagne geplant, welche ab April 2014 umgesetzt wurde. Neben der spektralen Erfassung von Blatt-, Bestands- und Bodensignaturen in einem Winterweizen- und einem Maisfeld erfolgte auch die Messung wesentlicher Pflanzenparameter an den exakt gleichen Positionen. Hierzu zählt die non-destruktive Ableitung des Blattflächenindex (LAI), des Blattchlorophyllgehalts (Ccab), des Blattwassergehalts (EWT oder Cw), des relativen Blatttrockengewichts (LMA oder Cm), des mittleren Blattneigungswinkels im Bestand (ALIA) sowie weiterer sekundärer Parameter wie Wuchshöhe, das phänologisches Stadium und der Sonnenvektor. Um die Fähigkeit des späteren EnMAP-Satelliten sich um bis zu 30° orthogonal zur Flugrichtung zu kippen nachzustellen, wurden die spektralen Aufnahmen aus verschiedenen Betrachtungswinkeln erstellt, die dieser Aufnahme-Geometrien nachempfunden sind. Ein gängiges Verfahren zur Ableitung der relevanten Pflanzenparameter ist die Verwendung des Strahlungstransfermodells PROSAIL, welches das spektrale Signal einer Vegetationsfläche auf Basis der zugrundeliegenden biophysikalischen und biochemischen Parameter simuliert. Bei der Umkehr dieses Prozesses können ebendiese Variablen von gemessenen spektralen Daten abgeleitet werden. Hierzu wurde eine Datenbank (Look-Up-Table, LUT) aus PROSAIL-Modellläufen aufgebaut und die in den Feldkampagnen gemessenen Spektren mit dieser abgeglichen. Mit dieser Methode der LUT-Invertierung aus unterschiedlichen Aufnahmewinkeln konnten Genauigkeiten bei der LAI-Schätzung von 18 % und bei Blattchlorophyll von 20 % erzielt werden. Eine starke Anisotropie, also eine Reflexionsabhängigkeit von der Beleuchtungs- und Aufnahmerichtung, wurde bei Winterweizen vor allem für frühe Entwicklungsstadien festgestellt. Bei einer anschließenden Studie zur Unsicherheitsanalyse des Spektralmodells wurden PROSAIL-Ergebnisse, bei denen real gemessene Pflanzenparameter als Input dienten, den zugehörigen Reflektanzspektren gegenübergestellt. Es zeigten sich hierbei mitunter starke Abweichungen zwischen gemessenen und modellierten Spektren, die im Falle des Winterweizens einen saisonalen Verlauf zeichneten. Vor allem während frühen Wachstumsstadien tendierte das Modell dazu die Reflektanz im nahen Infrarot zu überschätzen, während es gegen Ende der Wachstumsperiode eher eine Unterschätzung aufwies. Als Unsicherheitsfaktor wurde die Parametrisierung des Modells ausgemacht, wenn der ALIA-Parameter als echter physikalische Blattwinkel interpretiert wird. Es wurde geschlussfolgert, dass eine Separierung von LAI und ALIA bei der Invertierung von PROSAIL eine korrekte Abschätzung der weniger sensitiven Parameter behindert. Die Erstellung des Vegetations-Prozessors erforderte die Verwendung von Regressions-Algorithmen des maschinellen Lernens (MLRA), da eine Verteilung von großen LUTs an die User nicht praktikabel wäre. Die MLRAs wurden an synthetischen Datensätzen trainiert, wobei zunächst die Optimierung der Hyperparameter im Vordergrund stand, bevor die Anwendung an echten Spektraldaten unternommen wurde. Es konnten dabei erst aussagekräftige Ergebnisse produziert werden, als die Trainingsdaten mit einem künstlichen Rauschen belegt wurden, da die Algorithmen unter einer Überanpassung an die Modellumgebung litten. Mithilfe des Prozessors konnten schließlich LAI, ALIA, Ccab und Cw aus hyperspektralen Daten abgeleitet werden. Künstliche neuronale Netze dienen dabei als Blackbox-Modelle, die in kurzer Zeit große Datenmengen verarbeiten können und somit einen entscheidenden Beitrag zur modernen angewandten Fernerkundung für eine breite User-Community leisten.After years of scientific and technical preparation, the launch of an unmanned German space-mission is planned to be initiated in 2020. The Environmental Mapping and Analysis Program (EnMAP) is going to provide an equally named hyperspectral imager to map land surfaces. Scientists of environmental disciplines of monitoring of ecosystems, agricultural, forestry and urban areas as well as coastal and inland waters, geology and soils prepared themselves for the upcoming data prior to the actual launch. Although there already exists a variety of useful algorithms for a profound analysis of spectral data, new challenges will arise given the uniqueness of the EnMAP-mission in the global context of remote sensing; i.e. coverage of the full range of the optical spectrum (420 nm – 2450 nm) in combination with a moderate spatial resolution of 30 m and a high signal-to-noise ratio of at least 180 in the shortwave infrared and above 400 in the visible spectrum. This enables an imaging quality which to this date has only been reached by airborne systems. The efforts of this dissertation comprise activities in the scientific preparation phase for agro-geographical tasks. Algorithms and tools for an analysis of hyperspectral data are being provided for free in the QGIS-plugin EnMAP-Box 3. Urgent questions in the agricultural sector revolve around the derivation of biochemical and biophysical parameters from remote sensing data. For this reason, the overarching objective of this promotion is the development of a scientific EnMAP-tool for managed areas of vegetation (EnMAP Managed Vegetation Scientific Processor). At first, an extensive field campaign was planned and then started in April, 2014. Apart from spectral observations of leaves, canopies and soils in a winter wheat and a maize field, also relevant plant parameters were acquired at the exact same spots. Namely, they are the Leaf Area Index (LAI), leaf chlorophyll content (Ccab), leaf water content (EWT or Cw), relative dry leaf weight (LMA or Cm), Average Leaf Inclination Angle (ALIA) as well as other secondary parameters like canopy height, phenological stage and the solar vector. Spectral measurements were captured from different observation angles to match ground data with the sensing geometry of the future EnMAP-satellite, which can be tilted up to 30° orthogonal to its direction of flight. A common procedure to derive relevant crop parameters is to make use of the radiative transfer model PROSAIL, which simulates the spectral signal of a vegetated surface based on biophysical and biochemical input parameters. If this process is reverted, said parameters can be derived from measured spectral data. To do so, a Look-Up-Table (LUT) is built containing model runs of PROSAIL and then subsequently compared against spectra from the field campaigns. With this approach of LUT-inversions from different observation angles, an accuracy of 18 % could be achieved for LAI and 20 % for Ccab. Strong anisotropic effects, i.e. dependence on illumination geometry and sensor orientation, were identified for winter wheat mainly in the early stages of plant development. In a consecutive study about uncertainties of the spectral model, PROSAIL results fed with in situ measured crop parameters as input, were opposed to their associated reflectance signatures. A strong deviation between measured and modelled spectra was observed, which – in the case of winter wheat – showed a seasonal behavior. The model tended to overestimate reflectances in the near infrared for early phenological stages and to underestimate them at end of the growing period. The parametrization of the model was identified as an uncertainty factor if the ALIA parameter is interpreted as true physical leaf inclinations. It was concluded that a separation of LAI and ALIA at inversion of PROSAIL prevents an adequate estimation of the less sensitive parameters. The development of the vegetation processor required the use of Machine Learning Regression Algorithms (MLRA), since distribution of large LUTs to the user would be impracticable. The MLRAs were trained with synthetic datasets with primary importance to optimize their hyperparameters, before attempting to apply the algorithms to real spectral data. Significant results could not be obtained until training data were altered with artificial noise, because algorithms suffered from overfitting to the model environment. Executing the processor allowed to derive LAI, ALIA, Ccab and Cw from hyperspectral data. Artificial neural networks served as black box models, which digest great amount of data in a short period of time and thus make a decisive contribution to modern applied remote sensing with relevance for a broad user-community

    The EnMAP Managed Vegetation Scientific Processor

    Get PDF
    Nach jahrelanger wissenschaftlicher und technischer Vorbereitungszeit wird voraussichtlich Ende des Jahres 2020 der Start der orbitalen Phase einer unbemannten deutschen Weltraum-Mission initiiert. Das Environmental Mapping and Analysis Program (EnMAP) wird an Bord des gleichnamigen Satelliten einen hyperspektralen Sensor zur Erfassung terrestrischer Oberflächen tragen. In den Umweltdisziplinen zur Erforschung von Ökosystemen, landwirtschaftlicher, forstwirtschaftlicher und urbaner Flächen, im Bereich der Küsten- und Inlandsgewässer sowie der Geologie und Bodenkunde bereitete man sich im Vorfeld des Starts auf die kommenden Daten vor. Zwar existiert bereits eine Vielzahl an Algorithmen zur wissenschaftlichen Analyse von spektralen Daten, allerdings ergeben sich auch neue Herausforderungen, da die EnMAP-Mission bislang im weltweiten Kontext der Fernerkundung einzigartig ist. Die Abdeckung des vollen optischen Spektrums (420 nm – 2450 nm) in Verbindung mit einer moderaten räumlichen Auflösung von 30 m und einem hohen Signal-Rausch-Verhältnis von mindestens 180 im kurzwelligen Infrarot und über 400 im sichtbaren Spektrum, ermöglichen eine Aufnahmequalität, die bislang nur von flugzeuggestützten Systemen erreicht werden konnte. Die Bemühungen in dieser Dissertation umfassen Aktivitäten in der wissenschaftlichen Vorbereitungsphase zu agrargeographischen Fragestellungen. Algorithmen und Tools zur Analyse der hyperspektralen Daten werden kostenlos im QGIS-Plugin EnMAP-Box 3 zur Verfügung gestellt. Die drängenden Fragen im Agrarsektor drehen sich hierbei um die Ableitung biochemischer und biophysikalischer Parameter aus Fernerkundungsdaten, weshalb die übergeordnete Problemstellung des Promotionsvorhabens die Entwicklung eines wissenschaftsbasierten EnMAP-Tools für bewirtschaftete Vegetationsflächen (EnMAP Managed Vegetation Scientific Processor) darstellt. Zu Beginn wurde eine umfassende Feldkampagne geplant, welche ab April 2014 umgesetzt wurde. Neben der spektralen Erfassung von Blatt-, Bestands- und Bodensignaturen in einem Winterweizen- und einem Maisfeld erfolgte auch die Messung wesentlicher Pflanzenparameter an den exakt gleichen Positionen. Hierzu zählt die non-destruktive Ableitung des Blattflächenindex (LAI), des Blattchlorophyllgehalts (Ccab), des Blattwassergehalts (EWT oder Cw), des relativen Blatttrockengewichts (LMA oder Cm), des mittleren Blattneigungswinkels im Bestand (ALIA) sowie weiterer sekundärer Parameter wie Wuchshöhe, das phänologisches Stadium und der Sonnenvektor. Um die Fähigkeit des späteren EnMAP-Satelliten sich um bis zu 30° orthogonal zur Flugrichtung zu kippen nachzustellen, wurden die spektralen Aufnahmen aus verschiedenen Betrachtungswinkeln erstellt, die dieser Aufnahme-Geometrien nachempfunden sind. Ein gängiges Verfahren zur Ableitung der relevanten Pflanzenparameter ist die Verwendung des Strahlungstransfermodells PROSAIL, welches das spektrale Signal einer Vegetationsfläche auf Basis der zugrundeliegenden biophysikalischen und biochemischen Parameter simuliert. Bei der Umkehr dieses Prozesses können ebendiese Variablen von gemessenen spektralen Daten abgeleitet werden. Hierzu wurde eine Datenbank (Look-Up-Table, LUT) aus PROSAIL-Modellläufen aufgebaut und die in den Feldkampagnen gemessenen Spektren mit dieser abgeglichen. Mit dieser Methode der LUT-Invertierung aus unterschiedlichen Aufnahmewinkeln konnten Genauigkeiten bei der LAI-Schätzung von 18 % und bei Blattchlorophyll von 20 % erzielt werden. Eine starke Anisotropie, also eine Reflexionsabhängigkeit von der Beleuchtungs- und Aufnahmerichtung, wurde bei Winterweizen vor allem für frühe Entwicklungsstadien festgestellt. Bei einer anschließenden Studie zur Unsicherheitsanalyse des Spektralmodells wurden PROSAIL-Ergebnisse, bei denen real gemessene Pflanzenparameter als Input dienten, den zugehörigen Reflektanzspektren gegenübergestellt. Es zeigten sich hierbei mitunter starke Abweichungen zwischen gemessenen und modellierten Spektren, die im Falle des Winterweizens einen saisonalen Verlauf zeichneten. Vor allem während frühen Wachstumsstadien tendierte das Modell dazu die Reflektanz im nahen Infrarot zu überschätzen, während es gegen Ende der Wachstumsperiode eher eine Unterschätzung aufwies. Als Unsicherheitsfaktor wurde die Parametrisierung des Modells ausgemacht, wenn der ALIA-Parameter als echter physikalische Blattwinkel interpretiert wird. Es wurde geschlussfolgert, dass eine Separierung von LAI und ALIA bei der Invertierung von PROSAIL eine korrekte Abschätzung der weniger sensitiven Parameter behindert. Die Erstellung des Vegetations-Prozessors erforderte die Verwendung von Regressions-Algorithmen des maschinellen Lernens (MLRA), da eine Verteilung von großen LUTs an die User nicht praktikabel wäre. Die MLRAs wurden an synthetischen Datensätzen trainiert, wobei zunächst die Optimierung der Hyperparameter im Vordergrund stand, bevor die Anwendung an echten Spektraldaten unternommen wurde. Es konnten dabei erst aussagekräftige Ergebnisse produziert werden, als die Trainingsdaten mit einem künstlichen Rauschen belegt wurden, da die Algorithmen unter einer Überanpassung an die Modellumgebung litten. Mithilfe des Prozessors konnten schließlich LAI, ALIA, Ccab und Cw aus hyperspektralen Daten abgeleitet werden. Künstliche neuronale Netze dienen dabei als Blackbox-Modelle, die in kurzer Zeit große Datenmengen verarbeiten können und somit einen entscheidenden Beitrag zur modernen angewandten Fernerkundung für eine breite User-Community leisten.After years of scientific and technical preparation, the launch of an unmanned German space-mission is planned to be initiated in 2020. The Environmental Mapping and Analysis Program (EnMAP) is going to provide an equally named hyperspectral imager to map land surfaces. Scientists of environmental disciplines of monitoring of ecosystems, agricultural, forestry and urban areas as well as coastal and inland waters, geology and soils prepared themselves for the upcoming data prior to the actual launch. Although there already exists a variety of useful algorithms for a profound analysis of spectral data, new challenges will arise given the uniqueness of the EnMAP-mission in the global context of remote sensing; i.e. coverage of the full range of the optical spectrum (420 nm – 2450 nm) in combination with a moderate spatial resolution of 30 m and a high signal-to-noise ratio of at least 180 in the shortwave infrared and above 400 in the visible spectrum. This enables an imaging quality which to this date has only been reached by airborne systems. The efforts of this dissertation comprise activities in the scientific preparation phase for agro-geographical tasks. Algorithms and tools for an analysis of hyperspectral data are being provided for free in the QGIS-plugin EnMAP-Box 3. Urgent questions in the agricultural sector revolve around the derivation of biochemical and biophysical parameters from remote sensing data. For this reason, the overarching objective of this promotion is the development of a scientific EnMAP-tool for managed areas of vegetation (EnMAP Managed Vegetation Scientific Processor). At first, an extensive field campaign was planned and then started in April, 2014. Apart from spectral observations of leaves, canopies and soils in a winter wheat and a maize field, also relevant plant parameters were acquired at the exact same spots. Namely, they are the Leaf Area Index (LAI), leaf chlorophyll content (Ccab), leaf water content (EWT or Cw), relative dry leaf weight (LMA or Cm), Average Leaf Inclination Angle (ALIA) as well as other secondary parameters like canopy height, phenological stage and the solar vector. Spectral measurements were captured from different observation angles to match ground data with the sensing geometry of the future EnMAP-satellite, which can be tilted up to 30° orthogonal to its direction of flight. A common procedure to derive relevant crop parameters is to make use of the radiative transfer model PROSAIL, which simulates the spectral signal of a vegetated surface based on biophysical and biochemical input parameters. If this process is reverted, said parameters can be derived from measured spectral data. To do so, a Look-Up-Table (LUT) is built containing model runs of PROSAIL and then subsequently compared against spectra from the field campaigns. With this approach of LUT-inversions from different observation angles, an accuracy of 18 % could be achieved for LAI and 20 % for Ccab. Strong anisotropic effects, i.e. dependence on illumination geometry and sensor orientation, were identified for winter wheat mainly in the early stages of plant development. In a consecutive study about uncertainties of the spectral model, PROSAIL results fed with in situ measured crop parameters as input, were opposed to their associated reflectance signatures. A strong deviation between measured and modelled spectra was observed, which – in the case of winter wheat – showed a seasonal behavior. The model tended to overestimate reflectances in the near infrared for early phenological stages and to underestimate them at end of the growing period. The parametrization of the model was identified as an uncertainty factor if the ALIA parameter is interpreted as true physical leaf inclinations. It was concluded that a separation of LAI and ALIA at inversion of PROSAIL prevents an adequate estimation of the less sensitive parameters. The development of the vegetation processor required the use of Machine Learning Regression Algorithms (MLRA), since distribution of large LUTs to the user would be impracticable. The MLRAs were trained with synthetic datasets with primary importance to optimize their hyperparameters, before attempting to apply the algorithms to real spectral data. Significant results could not be obtained until training data were altered with artificial noise, because algorithms suffered from overfitting to the model environment. Executing the processor allowed to derive LAI, ALIA, Ccab and Cw from hyperspectral data. Artificial neural networks served as black box models, which digest great amount of data in a short period of time and thus make a decisive contribution to modern applied remote sensing with relevance for a broad user-community

    The Spaceborne Imaging Spectrometer DESIS: Data Access and Scientific Applications

    Get PDF
    The DLR Earth Sensing Imaging Spectrometer (DESIS) is a space-based instrument installed and operated on the International Space Station (ISS). This space mission is the achievement of the collaboration between the German Aerospace Center (DLR) and the US company Teledyne Brown Engineering (TBE). DLR has developed the instrument and the software for data processing, while TBE provides the Multi-User System for Earth Sensing (MUSES) platform, where DESIS is installed, and the infrastructure for operation and data tasking

    The data concept behind the data: From metadata models and labelling schemes towards a generic spectral library

    Get PDF
    Spectral libraries play a major role in imaging spectroscopy. They are commonly used to store end-member and spectrally pure material spectra, which are primarily used for mapping or unmixing purposes. However, the development of spectral libraries is time consuming and usually sensor and site dependent. Spectral libraries are therefore often developed, used and tailored only for a specific case study and only for one sensor. Multi-sensor and multi-site use of spectral libraries is difficult and requires technical effort for adaptation, transformation, and data harmonization steps. Especially the huge amount of urban material specifications and its spectral variations hamper the setup of a complete spectral library consisting of all available urban material spectra. By a combined use of different urban spectral libraries, besides the improvement of spectral inter- and intra-class variability, missing material spectra could be considered with respect to a multi-sensor/ -site use. Publicly available spectral libraries mostly lack the metadata information that is essential for describing spectra acquisition and sampling background, and can serve to some extent as a measure of quality and reliability of the spectra and the entire library itself. In the GenLib project, a concept for a generic, multi-site and multi-sensor usable spectral library for image spectra on the urban focus was developed. This presentation will introduce a 1) unified, easy-to-understand hierarchical labeling scheme combined with 2) a comprehensive metadata concept that is 3) implemented in the SPECCHIO spectral information system to promote the setup and usability of a generic urban spectral library (GUSL). The labelling scheme was developed to ensure the translation of individual spectral libraries with their own labelling schemes and their usually varying level of details into the GUSL framework. It is based on a modified version of the EAGLE classification concept by combining land use, land cover, land characteristics and spectral characteristics. The metadata concept consists of 59 mandatory and optional attributes that are intended to specify the spatial context, spectral library information, references, accessibility, calibration, preprocessing steps, and spectra specific information describing library spectra implemented in the GUSL. It was developed on the basis of existing metadata concepts and was subject of an expert survey. The metadata concept and the labelling scheme are implemented in the spectral information system SPECCHIO, which is used for sharing and holding GUSL spectra. It allows easy implementation of spectra as well as their specification with the proposed metadata information to extend the GUSL. Therefore, the proposed data model represents a first fundamental step towards a generic usable and continuously expandable spectral library for urban areas. The metadata concept and the labelling scheme also build the basis for the necessary adaptation and transformation steps of the GUSL in order to use it entirely or in excerpts for further multi-site and multi-sensor applications

    Calibration of DART Radiative Transfer Model with Satellite Images for Simulating Albedo and Thermal Irradiance Images and 3D Radiative Budget of Urban Environment

    Get PDF
    Remote sensing is increasingly used for managing urban environment. In this context, the H2020 project URBANFLUXES aims to improve our knowledge on urban anthropogenic heat fluxes, with the specific study of three cities: London, Basel and Heraklion. Usually, one expects to derive directly 2 major urban parameters from remote sensing: the albedo and thermal irradiance. However, the determination of these two parameters is seriously hampered by complexity of urban architecture. For example, urban reflectance and brightness temperature are far from isotropic and are spatially heterogeneous. Hence, radiative transfer models that consider the complexity of urban architecture when simulating remote sensing signals are essential tools. Even for these sophisticated models, there is a major constraint for an operational use of remote sensing: the complex 3D distribution of optical properties and temperatures in urban environments. Here, the work is conducted with the DART (Discrete Anisotropic Radiative Transfer) model. It is a comprehensive physically based 3D radiative transfer model that simulates optical signals at the entrance of imaging spectro-radiometers and LiDAR scanners on board of satellites and airplanes, as well as the 3D radiative budget, of urban and natural landscapes for any experimental (atmosphere, topography,…) and instrumental (sensor altitude, spatial resolution, UV to thermal infrared,…) configuration. Paul Sabatier University distributes free licenses for research activities. This paper presents the calibration of DART model with high spatial resolution satellite images (Landsat 8, Sentinel 2, etc.) that are acquired in the visible (VIS) / near infrared (NIR) domain and in the thermal infrared (TIR) domain. Here, the work is conducted with an atmospherically corrected Landsat 8 image and Bale city, with its urban database. The calibration approach in the VIS/IR domain encompasses 5 steps for computing the 2D distribution (image) of urban albedo at satellite spatial resolution. (1) DART simulation of satellite image at very high spatial resolution (e.g., 50cm) per satellite spectral band. Atmosphere conditions are specific to the satellite image acquisition. (2) Spatial resampling of DART image at the coarser spatial resolution of the available satellite image, per spectral band. (3) Iterative derivation of the urban surfaces (roofs, walls, streets, vegetation,…) optical properties as derived from pixel-wise comparison of DART and satellite images, independently per spectral band. (4) Computation of the band albedo image of the city, per spectral band. (5) Computation of the image of the city albedo and VIS/NIR exitance, as an integral over all satellite spectral bands. In order to get a time series of albedo and VIS/NIR exitance, even in the absence of satellite images, ECMWF information about local irradiance and atmosphere conditions are used. A similar approach is used for calculating the city thermal exitance using satellite images acquired in the thermal infrared domain. Finally, DART simulations that are conducted with the optical properties derived from remote sensing images give also the 3D radiative budget of the city at any date including the date of the satellite image acquisition

    Teledetección. Nuevas plataformas y sensores aplicados a la gestión del agua, la agricultura y el medio ambiente

    Full text link
    Este libro recoge las comunicaciones presentadas al XVII Congreso de la Asociación Española de Teledetección (AET), celebrado del 3 al 7 de octubre de 2017 en el auditorio y palacio de congresos de Murcia y organizado por el Grupo de Sistemas de Información Geográfica y Teledetección del Instituto Murciano de Investigación y Desarrollo Agrario y Alimentario (IMIDA),con el soporte de la AET,el Instituto Geográfico Nacional (IGN), las universidades politécnicas de Cartagena y Valencia, la Confederación Hidrográfica del Segura, el ayuntamiento de Murcia,las empresas Gade Eventos y Geodim y la Universidad Católica de San Antonio El lema elegido para el Congreso ha sido "Nuevas plataformas y sensores de teledetección" aplicados a la gestión del agua,la agricultura y el medio ambiente, con la intención de promover el encuentro entre las comunidades académicas, científicas e industriales en el área de la teledetección, destacando las nuevas plataformas de bajo coste y los logros conseguidos en la generación y difusión de productos útiles para la sociedadRuiz Fernández, LÁ.; Estornell Cremades, J.; Erena Arrabal, M. (2017). Teledetección. Nuevas plataformas y sensores aplicados a la gestión del agua, la agricultura y el medio ambiente. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/90688EDITORIA
    corecore