Training of Crisis Mappers and Map Production from Multi-sensor Data: Vernazza Case Study (Cinque Terre National Park, Italy)

This aim of paper is to presents the development of a multidisciplinary project carried out by the cooperation between Politecnico di Torino and ITHACA (Information Technology for Humanitarian Assistance, Cooperation and Action). The goal of the project was the training in geospatial data acquiring and processing for students attending Architecture and Engineering Courses, in order to start up a team of "volunteer mappers". Indeed, the project is aimed to document the environmental and built heritage subject to disaster; the purpose is to improve the capabilities of the actors involved in the activities connected in geospatial data collection, integration and sharing. The proposed area for testing the training activities is the Cinque Terre National Park, registered in the World Heritage List since 1997. The area was affected by flood on the 25th of October 2011. According to other international experiences, the group is expected to be active after emergencies in order to upgrade maps, using data acquired by typical geomatic methods and techniques such as terrestrial and aerial Lidar, close-range and aerial photogrammetry, topographic and GNSS instruments etc.; or by non conventional systems and instruments such us UAV, mobile mapping etc. The ultimate goal is to implement a WebGIS platform to share all the data collected with local authorities and the Civil Protectio

INTELLIGENTE TRANSPORT SYSTEMEN ITS EN VERKEERSVEILIGHEID

This report discusses Intelligent Transport Systems (ITS). This generic term is used for a broad range of information-, control- and electronic technology that can be integrated in the road infrastructure and the vehicles themselves, saving lives, time and money bymonitoring and managing traffic flows, reducing conges-tion, avoiding accidents, etc. Because this report was written in the scope of the Policy Research Centre Mobility & Public Works, track Traffic Safety, it focuses on ITS systems from the traffic safety point of view. Within the whole range of ITS systems, two categories can be distinguished: autonomous and cooperative systems. Autonomous systems are all forms of ITS which operate by itself, and do not depend on the cooperation with other vehicles or supporting infrastructure. Example applications are blind spot detection using radar, electronic stability control, dynamic traffic management using variable road signs, emergency call, etc. Cooperative systems are ITS systems based on communication and cooperation, both between vehicles as between vehicles and infrastructure. Example applications are alerting vehicles approaching a traffic jam, exchanging data regarding hazardous road conditions, extended electronic brake light, etc. In some cases, autonomous systems can evolve to autonomous cooperative systems. ISA (Intelligent Speed Adaptation) is an example of this: the dynamic aspect as well as communication with infrastructure (eg Traffic lights, Variable Message Sign (VMS)...) can provide additional road safety. This is the clear link between the two parts of this report. The many ITS applications are an indicator of the high expectations from the government, the academic world and the industry regarding the possibilities made possible by both categories of ITS systems. Therefore, the comprehensive discussion of both of them is the core of this report. The first part of the report covering the autonomous systems treats two aspects: 1. Overview of European projects related to mobility and in particular to road safety 2. Overview for guidelines for the evaluation of ITS projects. Out of the wide range of diverse (autonomous) ITS applications a selection is made; this selection is focused on E Safety Forum and PreVENT. Especially the PreVent research project is interesting because ITS-applications have led to a number of concrete demonstration vehicles that showed - in protected and unprotected surroundings- that these ITS-applications are already technically useful or could be developed into useful products. The component “guidelines for the evaluation of ITS projects” outlines that the government has to have specific evaluation tools if the government has the ambition of using ITS-applications for road safety. Two projects -guidelines for the evaluation of ITS projects- are examined; a third evaluation method is only mentioned because this description shows that a specific targeting of the government can be desirable : 1. TRACE describes the guidelines for the evaluation of ITS projects which are useful for the evaluation of specific ITS-applications. 2. FITS contains Finnish guidelines for the evaluation of ITS project; FIS is an adaptation of methods used for evaluation of transport projects. 3. The third evaluation method for the evaluation of ITS projects is developed in an ongoing European research project, eImpact. eImpact is important because, a specific consultation of stake holders shows that the social importance of some techniques is underestimated. These preliminary results show that an appropriate guiding role for the government could be important. In the second part of this document the cooperative systems are discussed in depth. These systems enable a large number of applications with an important social relevance, both on the level of the environment, mobility and traffic safety. Cooperative systems make it possible to warn drivers in time to avoid collisions (e.g. when approaching the tail of a traffic jam, or when a ghost driver is detected). Hazardous road conditions can be automatically communicated to other drivers (e.g. after the detection of black ice or an oil trail by the ESP). Navigation systems can receive detailed real-time up-dates about the current traffic situation and can take this into account when calculating their routes. When a traffic distortion occurs, traffic centers can immediately take action and can actively influence the way that the traffic will be diverted. Drivers can be notified well in advance about approaching emergency vehicles, and can be directed to yield way in a uniform manner. This is just a small selection from the large number of applications that are made possible because of cooperative ITS systems, but it is very obvious that these systems can make a significant positive contribution to traffic safety. In literature it is estimated that the decrease of accidents with injuries of fatalities will be between 20% and 50% . It is not suprising that ITS systems receive a lot of attention for the moment. On an international level, a number of standards are being established regarding this topic. The International Telecommunications Uniont (ITU), Institute for Electrical and Electronics Engineers (IEEE), International Organization for Standardization (ISO), Association of Radio Industries and Business (ARIB) and European committee for standardization (CEN) are currently defining standards that describe different aspects of ITS systems. One of the names that is mostly mentioned in literature is the ISO TC204/WG16 Communications Architecture for Land Mobile environment (CALM) standard. It describes a framework that enables transparent (both for the application and the user) continuous communication through different communication media. Besides the innumerable standardization activities, there is a great number of active research projects. On European level, the most important are the i2010 Intelligent Car Initiative, the eSafety Forum, and the COMeSafety, the CVIS, the SAFESPOT, the COOPERS and the SEVECOM project. The i2010 Intelligent Car Initiative is an European initiative with the goal to halve the number of traffic casualties by 2010. The eSafety Forum is an initiative of the European Commission, industry and other stakeholders and targets the acceleration of development and deployment of safety-related ITS systems. The COMeSafety project supports the eSafety Forum on the field of vehicle-to-vehicle and vehicle-to-infrastructure communication. In the CVIS project, attention is given to both technical and non-technical issues, with the main goal to develop the first free and open reference implementation of the CALM architecture. The SAFEST project investigates which data is important for safety applications, and with which algorithmsthis data can be extracted from vehicles and infrastructure. The COOPERS project mainly targets communication between vehicles and dedicated roadside infrastructure. Finally, the SEVECOM project researches security and privacy issues. Besides the European projects, research is also conducted in the United States of America (CICAS and VII projects) and in Japan (AHSRA, VICS, Smartway, internetITS). Besides standardization bodies and governmental organizations, also the industry has a considerable interest in ITS systems. In the scope of their ITS activities, a number of companies are united in national and international organizations. On an international level, the best known names are the Car 2 Car Communication Consortium, and Ertico. The C2C CC unites the large European car manufacturers, and focuses on the development of an open standard for vehicle-to-vehicle and vehicle-to-infrastructure communications based on the already well established IEEE 802.11 WLAN standard. Ertico is an European multi-sector, public/private partnership with the intended purpose of the development and introduction of ITS systems. On a national level, FlandersDrive and The Telematics Cluster / ITS Belgium are the best known organizations. Despite the worldwide activities regarding (cooperative) ITS systems, there still is no consensus about the wireless technology to be used in such systems. This can be put down to the fact that a large number of suitable technologies exist or are under development. Each technology has its specific advantages and disadvantages, but no single technology is the ideal solution for every ITS application. However, the different candidates can be classified in three distinct categories. The first group contains solutions for Dedicated Short Range Communication (DSRC), such as the WAVE technology. The second group is made up of several cellular communication networks providing coverage over wide areas. Examples are GPRS (data communication using the GSM network), UMTS (faster then GPRS), WiMAX (even faster then UMTS) and MBWA (similar to WiMAX). The third group consists of digital data broadcast technologies such as RDS (via the current FM radio transmissions, slow), DAB and DMB (via current digital radio transmissions, quicker) and DVB-H (via future digital television transmissions for mobiledevices, quickest). The previous makes it clear that ITS systems are a hot topic right now, and they receive a lot of attention from the academic world, the standardization bodies and the industry. Therefore, it seems like that it is just a matter of time before ITS systems will find their way into the daily live. Due to the large number of suitable technologies for the implementation of cooperative ITS systems, it is very hard to define which role the government has to play in these developments, and which are the next steps to take. These issues were addressed in reports produced by the i2010 Intelligent Car Initiative and the CVIS project. Their state of the art overview revealed that until now, no country has successfully deployed a fully operational ITS system yet. Seven EU countries are the furthest and are already in the deployment phase: Sweden, Germany, the Netherlands, the United Kingdom, Finland, Spain and France. These countries are trailed by eight countries which are in the promotion phase: Denmark, Greece, Italy, Austria, Belgium,Norway, the Czech Republic and Poland. Finally, the last ten countries find themselves in the start-up phase: Estonia, Lithuania, Latvia, Slovenia, Slovakia, Hungary, Portugal, Switzerland, Ireland and Luxembourg. These European reports produced by the i2010 Intelligent Car Initiative and the CVIS project have defined a few policy recommendations which are very relevant for the Belgian and Flemish government. The most important recommendations for the Flemish government are: • Support awareness: research revealed that civilians consider ITS applications useful, but they are not really willing to pay for this technology. Therefore, it is important to convince the general public of the usefulness and the importance of ITS systems. • Fill the gaps: Belgium is situated in the promotion phase. This means that it should focus at identifying the missing stakeholders, and coordinating national and regional ITS activities. Here it is important that the research activities are coordinated in a national and international context to allow transfer of knowledge from one study to the next, as well as the results to be comparable. • Develop a vision: in the scope of ITS systems policies have to be defined regarding a large number of issues. For instance there is the question if ITS users should be educated, meaning that the use of ITS systems should be the subject of the drivers license exam. How will the regulations be for the technical inspection of vehicles equipped with ITS technology? Will ITS systems be deployed on a voluntary base, or will they e.g. be obliged in every new car? Will the services be offered by private companies, by the public authorities, or by a combination of them? Which technology will be used to implement ITS systems? These are just a few of the many questions where the government will have to develop a point of view for. • Policy coordination: ITS systems are a policy subject on an international, national and regional level. It is very important that these policy organizations can collaborate in a coordinated manner. • Iterative approach to policy development: developing policies for this complex matter is not a simple task. This asks for an iterative approach, where policy decisions are continuously refined and adjusted

MobileTrust: Secure Knowledge Integration in VANETs

Vehicular Ad hoc NETworks (VANET) are becoming popular due to the emergence of the Internet of Things and ambient intelligence applications. In such networks, secure resource sharing functionality is accomplished by incorporating trust schemes. Current solutions adopt peer-to-peer technologies that can cover the large operational area. However, these systems fail to capture some inherent properties of VANETs, such as fast and ephemeral interaction, making robust trust evaluation of crowdsourcing challenging. In this article, we propose MobileTrust—a hybrid trust-based system for secure resource sharing in VANETs. The proposal is a breakthrough in centralized trust computing that utilizes cloud and upcoming 5G technologies to provide robust trust establishment with global scalability. The ad hoc communication is energy-efficient and protects the system against threats that are not countered by the current settings. To evaluate its performance and effectiveness, MobileTrust is modelled in the SUMO simulator and tested on the traffic features of the small-size German city of Eichstatt. Similar schemes are implemented in the same platform to provide a fair comparison. Moreover, MobileTrust is deployed on a typical embedded system platform and applied on a real smart car installation for monitoring traffic and road-state parameters of an urban application. The proposed system is developed under the EU-founded THREAT-ARREST project, to provide security, privacy, and trust in an intelligent and energy-aware transportation scenario, bringing closer the vision of sustainable circular economy

Real-Time Work Zone Traffic Management via Unmanned Air Vehicles

Highway work zones are prone to traffic accidents when congestion and queues develop. Vehicle queues expand at a rate of 1 mile every 2 minutes. Back-of-queue, rear-end crashes are the most common work zone crash, endangering the safety of motorists, passengers, and construction workers. The dynamic nature of queuing in the proximity of highway work zones necessitates traffic management solutions that can monitor and intervene in real time. Fortunately, recent progress in sensor technology, embedded systems, and wireless communication coupled to lower costs are now enabling the development of real-time, automated, “intelligent” traffic management systems that address this problem. The goal of this project was to perform preliminary research and proof of concept development work for the use of UAS in realtime traffic monitoring of highway construction zones in order to create real-time alerts for motorists, construction workers, and first responders. The main tasks of the proposed system was to collect traffic data via the UAV camera, analyze that a UAV based highway construction zone monitoring systems would be capable of detecting congestion and back-of-queue information, and alerting motorists of stopped traffic conditions, delay times, and alternate route options. Experiments were conducted using UAS to monitor traffic and collect traffic videos for processing. Prototype software was created to analyze this data. The software was successful in detecting vehicle speed from zero mph to highway speeds. Review of available mobile traffic apps were conducted for future integration with advanced iterations of the UAV and software system that has been created by this research. This project has proven that UAS monitoring of highway construction zones and real-time alerts to motorists, construction crews, and first responders is possible in the near term and future research is needed to further development and implement the innovative UAS traffic monitoring system developed by this research

VANET Applications: Hot Use Cases

Current challenges of car manufacturers are to make roads safe, to achieve free flowing traffic with few congestions, and to reduce pollution by an effective fuel use. To reach these goals, many improvements are performed in-car, but more and more approaches rely on connected cars with communication capabilities between cars, with an infrastructure, or with IoT devices. Monitoring and coordinating vehicles allow then to compute intelligent ways of transportation. Connected cars have introduced a new way of thinking cars - not only as a mean for a driver to go from A to B, but as smart cars - a user extension like the smartphone today. In this report, we introduce concepts and specific vocabulary in order to classify current innovations or ideas on the emerging topic of smart car. We present a graphical categorization showing this evolution in function of the societal evolution. Different perspectives are adopted: a vehicle-centric view, a vehicle-network view, and a user-centric view; described by simple and complex use-cases and illustrated by a list of emerging and current projects from the academic and industrial worlds. We identified an empty space in innovation between the user and his car: paradoxically even if they are both in interaction, they are separated through different application uses. Future challenge is to interlace social concerns of the user within an intelligent and efficient driving

Enhancing service quality and reliability in intelligent traffic system

Intelligent Traffic Systems (ITS) can manage on-road traffic efficiently based on real-time traffic conditions, reduce delay at the intersections, and maintain the safety of the road users. However, emergency vehicles still struggle to meet their targeted response time, and an ITS is vulnerable to various types of attacks, including cyberattacks. To address these issues, in this dissertation, we introduce three techniques that enhance the service quality and reliability of an ITS. First, an innovative Emergency Vehicle Priority System (EVPS) is presented to assist an Emergency Vehicle (EV) in attending the incident place faster. Our proposed EVPS determines the proper priority codes of EV based on the type of incidents. After priority code generation, EVPS selects the number of traffic signals needed to be turned green considering the impact on other vehicles gathered in the relevant adjacent cells. Second, for improving reliability, an Intrusion Detection System for traffic signals is proposed for the first time, which leverages traffic and signal characteristics such as the flow rate, vehicle speed, and signal phase time. Shannon’s entropy is used to calculate the uncertainty associated with the likelihood of particular evidence and Dempster-Shafer (DS) decision theory is used to fuse the evidential information. Finally, to improve the reliability of a future ITS, we introduce a model that assesses the trust level of four major On-Board Units (OBU) of a self-driving car along with Global Positioning System (GPS) data and safety messages. Both subjective logic (DS theory) and CertainLogic are used to develop the theoretical underpinning for estimating the trust value of a self-driving car by fusing the trust value of four OBU components, GPS data and safety messages. For evaluation and validation purposes, a popular and widely used traffic simulation package, namely Simulation of Urban Mobility (SUMO), is used to develop the simulation platform using a real map of Melbourne CBD. The relevant historical real data taken from the VicRoads website were used to inject the traffic flow and density in the simulation model. We evaluated the performance of our proposed techniques considering different traffic and signal characteristics such as occupancy rate, flow rate, phase time, and vehicle speed under many realistic scenarios. The simulation result shows the potential efficacy of our proposed techniques for all selected scenarios.Doctor of Philosoph

Evaluating the Impacts of Accelerated Incident Clearance Tools and Strategies by Harnessing the Power of Microscopic Traffic Simulation

Traffic incidents cause Americans delay, waste fuel, cause injuries, and create toxic emissions. Transportation professionals have implemented a variety of tools to manage these impacts and researchers have studied their effectiveness, illustrating a wide range between different tools and locations. To improve this state of knowledge, this dissertation sought to 1) identify prominent and effective incident management strategies, 2) model six selected incident management strategies within five highway corridors in South Carolina, and 3) apply benefit-cost analysis to evaluate the impact of various combinations of these strategies. To meet these objectives, the author evaluated published literature of the selected strategies, administered a nationwide survey of these strategies, conducted traffic simulation, and performed benefit-cost analysis. The literature review guided the author to fill gaps in knowledge regarding the effectiveness and expense of identified strategies. The nationwide survey identified effective incident management tools, the extent of their adoption, and their common problems. The author then applied PARAMICS traffic simulation software to evaluate the impact of six tools at five sites on metropolitan interstates throughout South Carolina. Finally, benefit-cost analysis was used to evaluate the benefits against costs at each study site. The survey provided many insights into both the effectiveness and collaboration within and among traffic incident management agencies and guided the author in selecting tools for evaluation. While the simulation study found that as the severity and duration of incident increases, so does the potential benefit of incident management tools, the frequency of incidents also produces significant impact on annual benefits. The benefit-cost analysis indicated that while all the incident management tools evaluated provided more benefits than costs, freeway service patrols and traffic cameras produced the highest return for incidents of varying severity. It was also found more advantageous to select one expensive but efficient incident management technology, rather than engage in the incremental deployment of various systems that might provide redundant benefits. Departments of transportation across the United States see the need to manage incidents more efficiently, consequently this dissertation developed data and analysis to compare benefits with costs to aid decision makers in selecting tools and strategies for future incident management endeavors

Human Performance Contributions to Safety in Commercial Aviation

In the commercial aviation domain, large volumes of data are collected and analyzed on the failures and errors that result in infrequent incidents and accidents, but in the absence of data on behaviors that contribute to routine successful outcomes, safety management and system design decisions are based on a small sample of non- representative safety data. Analysis of aviation accident data suggests that human error is implicated in up to 80% of accidents, which has been used to justify future visions for aviation in which the roles of human operators are greatly diminished or eliminated in the interest of creating a safer aviation system. However, failure to fully consider the human contributions to successful system performance in civil aviation represents a significant and largely unrecognized risk when making policy decisions about human roles and responsibilities. Opportunities exist to leverage the vast amount of data that has already been collected, or could be easily obtained, to increase our understanding of human contributions to things going right in commercial aviation. The principal focus of this assessment was to identify current gaps and explore methods for identifying human success data generated by the aviation system, from personnel and within the supporting infrastructure

A Framework for Incident Detection and notification in Vehicular Ad-Hoc Networks

The US Department of Transportation (US-DOT) estimates that over half of all congestion events are caused by highway incidents rather than by rush-hour traffic in big cities. The US-DOT also notes that in a single year, congested highways due to traffic incidents cost over $75 billion in lost worker productivity and over 8.4 billion gallons of fuel. Further, the National Highway Traffic Safety Administration (NHTSA) indicates that congested roads are one of the leading causes of traffic accidents, and in 2005 an average of 119 persons died each day in motor vehicle accidents. Recently, Vehicular Ad-hoc Networks (VANET) employing a combination of Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) wireless communication have been proposed to alert drivers to traffic events including accidents, lane closures, slowdowns, and other traffic-safety issues. In this thesis, we propose a novel framework for incident detection and notification dissemination in VANETs. This framework consists of three main components: a system architecture, a traffic incident detection engine and a notification dissemination mechanism. The basic idea of our framework is to collect and aggregate traffic-related data from passing cars and to use the aggregated information to detect traffic anomalies. Finally, the suitably filtered aggregated information is disseminated to alert drivers about traffic delays and incidents. The first contribution of this thesis is an architecture for the notification of traffic incidents, NOTICE for short. In NOTICE, sensor belts are embedded in the road at regular intervals, every mile or so. Each belt consists of a collection of pressure sensors, a simple aggregation and fusion engine, and a few small transceivers. The pressure sensors in each belt allow every message to be associated with a physical vehicle passing over that belt. Thus, no one vehicle can pretend to be multiple vehicles and then, is no need for an ID to be assigned to vehicles. Vehicles in NOTICE are fitted with a tamper-resistant Event Data Recorder (EDR), very much like the well-known black-boxes onboard commercial aircraft. EDRs are responsible for storing vehicles behavior between belts such as acceleration, deceleration and lane changes. Importantly, drivers can provide input to the EDR, using a simple menu, either through a dashboard console or through verbal input. The second contribution of this thesis is to develop incident detection techniques that use the information provided by cars in detecting possible incidents and traffic anomalies using intelligent inference techniques. For this purpose, we developed deterministic and probabilistic techniques to detect both blocking incidents, accidents for examples, as well as non-blocking ones such as potholes. To the best of our knowledge, our probabilistic technique is the first VANET based automatic incident detection technique that is capable of detecting both blocking and non blocking incidents. Our third contribution is to provide an analysis for vehicular traffic proving that VANETs tend to be disconnected in many highway scenarios, consisting of a collection of disjoint clusters. We also provide an analytical way to compute the expected cluster size and we show that clusters are quite stable over time. To the best of our knowledge, we are the first in the VANET community to prove analytically that disconnection is the norm rather than the exceptions in VANETs. Our fourth contribution is to develop data dissemination techniques specifically adapted to VANETs. With VANETs disconnection in mind, we developed data dissemination approaches that efficiently propagate messages between cars and belts on the road. We proposed two data dissemination techniques, one for divided roads and another one for undivided roads. We also proposed a probabilistic technique used by belts to determine how far should an incident notification be sent to alert approaching drivers. Our fifth contribution is to propose a security technique to avoid possible attacks from malicious drivers as well as preserving driver\u27s privacy in data dissemination and notification delivery in NOTICE. We also proposed a belt clustering scheme to reduce the probability of having a black-hole in the message dissemination while reducing also the operational burden if a belt is compromised