263 research outputs found

    Performance of voice and video conferencing over ATM and gigabit ethernet backbone networks

    Get PDF
    Gigabit Ethernet and ATM network technologies have been modeled as campus network backbones for the simulation-based comparison of their performance. Real-time voice and video conferencing traffic is used to compare the performance of both backbone technologies in terms of response times and packet end-to-end delays. Simulation results show that Gigabit Ethernet has been able to perform the same and in some cases better than ATM as a backbone network for video and voice conferencing providing network designers with a cheaper solution to meet the growing needs of bandwidth-hungry applications in a campus environment

    Performance evaluation of Fast Ethernet, ATM and Myrinet under PVM

    Get PDF
    Congestion in network switches can limit the communication traffic between Parallel Virtual Machine (PVM) nodes in a parallel computation. The research introduces a new benchmark to evaluate the performance of PVM in various networking environments. The benchmark is used to achieve a better understanding of performance limitations in parallel computing that are imposed by the choice of the network. The networks considered here are Fast Ethernet, Asynchronous Transfer Mode (ATM) OC-3c (155Mb/s) and Myrinet. Together, they represent an interesting range of alternatives for parallel cluster computing. A characterization of network delays and throughput and a comparison of the expected costs of the three environments are developed to provide a basis for an informed decision on the networking methods and topology for a parallel database that is being considered for FBI\u27s National DNA Indexing System (NDIS)[17]. This network is used for communications among the nodes of the parallel machine; thus the security requirements defined for the FBI\u27s Criminal Justice Information Services Division Wide Area Network (CJIS-WAN) [12] are not a concern

    Electronic and photonic switching in the atm era

    Get PDF
    Broadband networks require high-capacity switches in order to properly manage large amounts of traffic fluxes. Electronic and photonic technologies are being used to achieve this objective both allowing different multiplexing and switching techniques. Focusing on the asynchronous transfer mode (ATM), the inherent different characteristics of electronics and photonics makes different architectures feasible. In this paper, different switching structures are described, several ATM switching architectures which have been recently implemented are presented and the implementation characteristics discussed. Three diverse points of view are given from the electronic research, the photonic research and the commercial switches. Although all the architectures where successfully tested, they should also follow different market requirements in order to be commercialised. The characteristics are presented and the architectures projected over them to evaluate their commercial capabilities.Peer ReviewedPostprint (published version

    Multimedia Networks: Fundamentals and Future Directions

    Get PDF
    Multimedia has become an integral part of computing and communications environment, and networks are carrying ever-increasing volume of multimedia information. The main characteristics of multimedia information are high-volume and bursty traffic, with low tolerance to delay and delay variance. The legacy networks (designed in 70s and 80s) are not able to meet these requirements. Enhancements to the older networking technologies have been developed to convert these into multimedia networks. Enhancements to LANs include Switched Ethernet, Isochronous Ethernet, Fast Ethernet, 100VGAnyLAN, FDDI-II, and Synchronous FDDI. WAN options for multimedia networking include digital leased lines and ISDN. The Internet has revolutionized business and personal communications, but falls short of being a genuine multimedia network. To make the Internet capable of carrying multimedia traffic, new protocols such as MBone, ST-II, RTP, and RSVP have been developed. Internet2 is a new initiative that is aimed at overcoming the problems of throughput, delay and jitter encountered on the original Internet. One technology that was developed with multimedia networking as one of its main applications, is the Asynchronous Transfer Mode (ATM) technology. Upcoming Gigabit Ethernet technology will provide a path for upgrading current Ethernet networks into multimedia networks

    Congestion Control by Bandwidth-Delay Tradeoff in Very High-Speed Networks: The Case of Window-Based Control

    Get PDF
    Increasing bandwidth-delay product of high-speed wide-area networks is well-known to make conventional dynamic traffic control schemes sluggish . Still, most existing schemes employ dynamic control, among which TCP and ATM Forum\u27s rate-based flow control are prominent examples. So far, little has been investigated as to how the existing schemes will scale as bandwidth further increases up to gigabit speed and beyond. Our investigation in this paper is the first to show that dynamic control has a severe scalability problem with bandwidth increase, and to propose an entirely new approach to traffic control that overcomes the scalability problem. The essence of our approach is in exercising control in bandwidth domain rather than time domain, in order to avoid time delay in control. This requires more bandwidth than the timed counterpart, but achieves a much faster control. Furthermore, the bandwidth requirement is not excessively large because the bandwidth for smaller control delay and we call our approach Bandwidth-Latency Tradeoff (BLT). While the control in existing schemes are bound to delay, BLT is bound to bandwidth. As a fallout, BLT scales tied to bandwidth increase, rather than increasingly deteriorate as conventional schemes. Surprisingly, our approach begins to pay off much earlier than expected, even from a point where bandwidth-delay product is not so large. For instance, in a roughly AURORA-sized network, BLT far outperforms TCP on a shared 150Mbps link, where the bandwidth-delay product is around 60KB. In the other extreme where bandwidth-delay product is large, BLT outperforms TCP by as much as twenty times in terms of network power in a gigabit nationwide network. More importantly, BLT is designed to continue to scale with bandwidth increase and the performance gap is expected to widen further

    Technology Directions for the 21st Century

    Get PDF
    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services

    Congestion control mechanisms within MPLS networks

    Get PDF
    PhDAbstract not availabl
    • 

    corecore