1,114 research outputs found

    Cross-Speaker Emotion Transfer for Low-Resource Text-to-Speech Using Non-Parallel Voice Conversion with Pitch-Shift Data Augmentation

    Full text link
    Data augmentation via voice conversion (VC) has been successfully applied to low-resource expressive text-to-speech (TTS) when only neutral data for the target speaker are available. Although the quality of VC is crucial for this approach, it is challenging to learn a stable VC model because the amount of data is limited in low-resource scenarios, and highly expressive speech has large acoustic variety. To address this issue, we propose a novel data augmentation method that combines pitch-shifting and VC techniques. Because pitch-shift data augmentation enables the coverage of a variety of pitch dynamics, it greatly stabilizes training for both VC and TTS models, even when only 1,000 utterances of the target speaker's neutral data are available. Subjective test results showed that a FastSpeech 2-based emotional TTS system with the proposed method improved naturalness and emotional similarity compared with conventional methods.Comment: Submitted to Interspeech 202

    Adding expressiveness to unit selection speech synthesis and to numerical voice production

    Get PDF
    La parla és una de les formes de comunicació més naturals i directes entre éssers humans, ja que codifica un missatge i també claus paralingüístiques sobre l’estat emocional del locutor, el to o la seva intenció, esdevenint així fonamental en la consecució d’una interacció humà-màquina (HCI) més natural. En aquest context, la generació de parla expressiva pel canal de sortida d’HCI és un element clau en el desenvolupament de tecnologies assistencials o assistents personals entre altres aplicacions. La parla sintètica pot ser generada a partir de parla enregistrada utilitzant mètodes basats en corpus com la selecció d’unitats (US), que poden aconseguir resultats d’alta qualitat però d’expressivitat restringida a la pròpia del corpus. A fi de millorar la qualitat de la sortida de la síntesi, la tendència actual és construir bases de dades de veu cada cop més grans, seguint especialment l’aproximació de síntesi anomenada End-to-End basada en tècniques d’aprenentatge profund. Tanmateix, enregistrar corpus ad-hoc per cada estil expressiu desitjat pot ser extremadament costós o fins i tot inviable si el locutor no és capaç de realitzar adequadament els estils requerits per a una aplicació donada (ex: cant en el domini de la narració de contes). Alternativament, nous mètodes basats en la física de la producció de veu s’han desenvolupat a la darrera dècada gràcies a l’increment en la potència computacional. Per exemple, vocals o diftongs poden ser obtinguts utilitzant el mètode d’elements finits (FEM) per simular la propagació d’ones acústiques a través d’una geometria 3D realista del tracte vocal obtinguda a partir de ressonàncies magnètiques (MRI). Tanmateix, atès que els principals esforços en aquests mètodes de producció numèrica de veu s’han focalitzat en la millora del modelat del procés de generació de veu, fins ara s’ha prestat poca atenció a la seva expressivitat. A més, la col·lecció de dades per aquestes simulacions és molt costosa, a més de requerir un llarg postprocessament manual com el necessari per extreure geometries 3D del tracte vocal a partir de MRI. L’objectiu de la tesi és afegir expressivitat en un sistema que genera veu neutra, sense haver d’adquirir dades expressives del locutor original. Per un costat, s’afegeixen capacitats expressives a un sistema de conversió de text a parla basat en selecció d’unitats (US-TTS) dotat d’un corpus de veu neutra, per adreçar necessitats específiques i concretes en l’àmbit de la narració de contes, com són la veu cantada o situacions de suspens. A tal efecte, la veu és parametritzada utilitzant un model harmònic i transformada a l’estil expressiu desitjat d’acord amb un sistema expert. Es presenta una primera aproximació, centrada en la síntesi de suspens creixent per a la narració de contes, i es demostra la seva viabilitat pel que fa a naturalitat i qualitat de narració de contes. També s’afegeixen capacitats de cant al sistema US-TTS mitjançant la integració de mòduls de transformació de parla a veu cantada en el pipeline del TTS, i la incorporació d’un mòdul de generació de prosòdia expressiva que permet al mòdul de US seleccionar unitats més properes a la prosòdia cantada obtinguda a partir de la partitura d’entrada. Això resulta en un framework de síntesi de conversió de text a parla i veu cantada basat en selecció d’unitats (US-TTS&S) que pot generar veu parlada i cantada a partir d'un petit corpus de veu neutra (~2.6h). D’acord amb els resultats objectius, l’estratègia de US guiada per la partitura permet reduir els factors de modificació de pitch requerits per produir veu cantada a partir de les unitats de veu parlada seleccionades, però en canvi té una efectivitat limitada amb els factors de modificació de les durades degut a la curta durada de les vocals parlades neutres. Els resultats dels tests perceptius mostren que tot i òbviament obtenir una naturalitat inferior a la oferta per un sintetitzador professional de veu cantada, el framework pot adreçar necessitats puntuals de veu cantada per a la síntesis de narració de contes amb una qualitat raonable. La incorporació d’expressivitat s’investiga també en la simulació numèrica 3D de vocals basada en FEM mitjançant modificacions de les senyals d’excitació glotal utilitzant una aproximació font-filtre de producció de veu. Aquestes senyals es generen utilitzant un model Liljencrants-Fant (LF) controlat amb el paràmetre de forma del pols Rd, que permet explorar el continu de fonació lax-tens a més del rang de freqüències fonamentals, F0, de la veu parlada. S’analitza la contribució de la font glotal als modes d’alt ordre en la síntesis FEM de les vocals cardinals [a], [i] i [u] mitjançant la comparació dels valors d’energia d’alta freqüència (HFE) obtinguts amb geometries realistes i simplificades del tracte vocal. Les simulacions indiquen que els modes d’alt ordre es preveuen perceptivament rellevants d’acord amb valors de referència de la literatura, particularment per a fonacions tenses i/o F0s altes. En canvi, per a vocals amb una fonació laxa i/o F0s baixes els nivells d’HFE poden resultar inaudibles, especialment si no hi ha soroll d’aspiració en la font glotal. Després d’aquest estudi preliminar, s’han analitzat les característiques d’excitació de vocals alegres i agressives d’un corpus paral·lel de veu en castellà amb l’objectiu d’incorporar aquests estils expressius de veu tensa en la simulació numèrica de veu. Per a tal efecte, s’ha usat el vocoder GlottDNN per analitzar variacions d’F0 i pendent espectral relacionades amb l’excitació glotal en vocals [a]. Aquestes variacions es mapegen mitjançant la comparació amb vocals sintètiques en valors d’F0 i Rd per simular vocals que s’assemblin als estils alegre i agressiu. Els resultats mostren que és necessari incrementar l’F0 i disminuir l’Rd respecte la veu neutra, amb variacions majors per a alegre que per agressiu, especialment per a vocals accentuades. Els resultats aconseguits en les investigacions realitzades validen la possibilitat d’afegir expressivitat a la síntesi basada en corpus US-TTS i a la simulació numèrica de veu basada en FEM. Tanmateix, encara hi ha marge de millora. Per exemple, l’estratègia aplicada a la producció numèrica de veu es podria millorar estudiant i desenvolupant mètodes de filtratge invers així com incorporant modificacions del tracte vocal, mentre que el framework US-TTS&S es podria beneficiar dels avenços en tècniques de transformació de veu incloent transformacions de la qualitat de veu, aprofitant l’experiència adquirida en la simulació numèrica de vocals expressives.El habla es una de las formas de comunicación más naturales y directas entre seres humanos, ya que codifica un mensaje y también claves paralingüísticas sobre el estado emocional del locutor, el tono o su intención, convirtiéndose así en fundamental en la consecución de una interacción humano-máquina (HCI) más natural. En este contexto, la generación de habla expresiva para el canal de salida de HCI es un elemento clave en el desarrollo de tecnologías asistenciales o asistentes personales entre otras aplicaciones. El habla sintética puede ser generada a partir de habla gravada utilizando métodos basados en corpus como la selección de unidades (US), que pueden conseguir resultados de alta calidad, pero de expresividad restringida a la propia del corpus. A fin de mejorar la calidad de la salida de la síntesis, la tendencia actual es construir bases de datos de voz cada vez más grandes, siguiendo especialmente la aproximación de síntesis llamada End-to-End basada en técnicas de aprendizaje profundo. Sin embargo, gravar corpus ad-hoc para cada estilo expresivo deseado puede ser extremadamente costoso o incluso inviable si el locutor no es capaz de realizar adecuadamente los estilos requeridos para una aplicación dada (ej: canto en el dominio de la narración de cuentos). Alternativamente, nuevos métodos basados en la física de la producción de voz se han desarrollado en la última década gracias al incremento en la potencia computacional. Por ejemplo, vocales o diptongos pueden ser obtenidos utilizando el método de elementos finitos (FEM) para simular la propagación de ondas acústicas a través de una geometría 3D realista del tracto vocal obtenida a partir de resonancias magnéticas (MRI). Sin embargo, dado que los principales esfuerzos en estos métodos de producción numérica de voz se han focalizado en la mejora del modelado del proceso de generación de voz, hasta ahora se ha prestado poca atención a su expresividad. Además, la colección de datos para estas simulaciones es muy costosa, además de requerir un largo postproceso manual como el necesario para extraer geometrías 3D del tracto vocal a partir de MRI. El objetivo de la tesis es añadir expresividad en un sistema que genera voz neutra, sin tener que adquirir datos expresivos del locutor original. Per un lado, se añaden capacidades expresivas a un sistema de conversión de texto a habla basado en selección de unidades (US-TTS) dotado de un corpus de voz neutra, para abordar necesidades específicas y concretas en el ámbito de la narración de cuentos, como son la voz cantada o situaciones de suspense. Para ello, la voz se parametriza utilizando un modelo harmónico y se transforma al estilo expresivo deseado de acuerdo con un sistema experto. Se presenta una primera aproximación, centrada en la síntesis de suspense creciente para la narración de cuentos, y se demuestra su viabilidad en cuanto a naturalidad y calidad de narración de cuentos. También se añaden capacidades de canto al sistema US-TTS mediante la integración de módulos de transformación de habla a voz cantada en el pipeline del TTS, y la incorporación de un módulo de generación de prosodia expresiva que permite al módulo de US seleccionar unidades más cercanas a la prosodia cantada obtenida a partir de la partitura de entrada. Esto resulta en un framework de síntesis de conversión de texto a habla y voz cantada basado en selección de unidades (US-TTS&S) que puede generar voz hablada y cantada a partir del mismo pequeño corpus de voz neutra (~2.6h). De acuerdo con los resultados objetivos, la estrategia de US guiada por la partitura permite reducir los factores de modificación de pitch requeridos para producir voz cantada a partir de las unidades de voz hablada seleccionadas, pero en cambio tiene una efectividad limitada con los factores de modificación de duraciones debido a la corta duración de las vocales habladas neutras. Los resultados de las pruebas perceptivas muestran que, a pesar de obtener una naturalidad obviamente inferior a la ofrecida por un sintetizador profesional de voz cantada, el framework puede abordar necesidades puntuales de voz cantada para la síntesis de narración de cuentos con una calidad razonable. La incorporación de expresividad se investiga también en la simulación numérica 3D de vocales basada en FEM mediante modificaciones en las señales de excitación glotal utilizando una aproximación fuente-filtro de producción de voz. Estas señales se generan utilizando un modelo Liljencrants-Fant (LF) controlado con el parámetro de forma del pulso Rd, que permite explorar el continuo de fonación laxo-tenso además del rango de frecuencias fundamentales, F0, de la voz hablada. Se analiza la contribución de la fuente glotal a los modos de alto orden en la síntesis FEM de las vocales cardinales [a], [i] y [u] mediante la comparación de los valores de energía de alta frecuencia (HFE) obtenidos con geometrías realistas y simplificadas del tracto vocal. Las simulaciones indican que los modos de alto orden se prevén perceptivamente relevantes de acuerdo con valores de referencia de la literatura, particularmente para fonaciones tensas y/o F0s altas. En cambio, para vocales con una fonación laxa y/o F0s bajas los niveles de HFE pueden resultar inaudibles, especialmente si no hay ruido de aspiración en la fuente glotal. Después de este estudio preliminar, se han analizado las características de excitación de vocales alegres y agresivas de un corpus paralelo de voz en castellano con el objetivo de incorporar estos estilos expresivos de voz tensa en la simulación numérica de voz. Para ello, se ha usado el vocoder GlottDNN para analizar variaciones de F0 y pendiente espectral relacionadas con la excitación glotal en vocales [a]. Estas variaciones se mapean mediante la comparación con vocales sintéticas en valores de F0 y Rd para simular vocales que se asemejen a los estilos alegre y agresivo. Los resultados muestran que es necesario incrementar la F0 y disminuir la Rd respecto la voz neutra, con variaciones mayores para alegre que para agresivo, especialmente para vocales acentuadas. Los resultados conseguidos en las investigaciones realizadas validan la posibilidad de añadir expresividad a la síntesis basada en corpus US-TTS y a la simulación numérica de voz basada en FEM. Sin embargo, hay margen de mejora. Por ejemplo, la estrategia aplicada a la producción numérica de voz se podría mejorar estudiando y desarrollando métodos de filtrado inverso, así como incorporando modificaciones del tracto vocal, mientras que el framework US-TTS&S desarrollado se podría beneficiar de los avances en técnicas de transformación de voz incluyendo transformaciones de la calidad de la voz, aprovechando la experiencia adquirida en la simulación numérica de vocales expresivas.Speech is one of the most natural and direct forms of communication between human beings, as it codifies both a message and paralinguistic cues about the emotional state of the speaker, its mood, or its intention, thus becoming instrumental in pursuing a more natural Human Computer Interaction (HCI). In this context, the generation of expressive speech for the HCI output channel is a key element in the development of assistive technologies or personal assistants among other applications. Synthetic speech can be generated from recorded speech using corpus-based methods such as Unit-Selection (US), which can achieve high quality results but whose expressiveness is restricted to that available in the speech corpus. In order to improve the quality of the synthesis output, the current trend is to build ever larger speech databases, especially following the so-called End-to-End synthesis approach based on deep learning techniques. However, recording ad-hoc corpora for each and every desired expressive style can be extremely costly, or even unfeasible if the speaker is unable to properly perform the styles required for a given application (e.g., singing in the storytelling domain). Alternatively, new methods based on the physics of voice production have been developed in the last decade thanks to the increase in computing power. For instance, vowels or diphthongs can be obtained using the Finite Element Method (FEM) to simulate the propagation of acoustic waves through a 3D realistic vocal tract geometry obtained from Magnetic Resonance Imaging (MRI). However, since the main efforts in these numerical voice production methods have been focused on improving the modelling of the voice generation process, little attention has been paid to its expressiveness up to now. Furthermore, the collection of data for such simulations is very costly, besides requiring manual time-consuming postprocessing like that needed to extract 3D vocal tract geometries from MRI. The aim of the thesis is to add expressiveness into a system that generates neutral voice, without having to acquire expressive data from the original speaker. One the one hand, expressive capabilities are added to a Unit-Selection Text-to-Speech (US-TTS) system fed with a neutral speech corpus, to address specific and timely needs in the storytelling domain, such as for singing or in suspenseful situations. To this end, speech is parameterised using a harmonic-based model and subsequently transformed to the target expressive style according to an expert system. A first approach dealing with the synthesis of storytelling increasing suspense shows the viability of the proposal in terms of naturalness and storytelling quality. Singing capabilities are also added to the US-TTS system through the integration of Speech-to-Singing (STS) transformation modules into the TTS pipeline, and by incorporating an expressive prosody generation module that allows the US to select units closer to the target singing prosody obtained from the input score. This results in a Unit Selection based Text-to-Speech-and-Singing (US-TTS&S) synthesis framework that can generate both speech and singing from the same neutral speech small corpus (~2.6 h). According to the objective results, the score-driven US strategy can reduce the pitch scaling factors required to produce singing from the selected spoken units, but its effectiveness is limited regarding the time-scale requirements due to the short duration of the spoken vowels. Results from the perceptual tests show that although the obtained naturalness is obviously far from that given by a professional singing synthesiser, the framework can address eventual singing needs for synthetic storytelling with a reasonable quality. The incorporation of expressiveness is also investigated in the 3D FEM-based numerical simulation of vowels through modifications of the glottal flow signals following a source-filter approach of voice production. These signals are generated using a Liljencrants-Fant (LF) model controlled with the glottal shape parameter Rd, which allows exploring the tense-lax continuum of phonation besides the spoken vocal range of fundamental frequency values, F0. The contribution of the glottal source to higher order modes in the FEM synthesis of cardinal vowels [a], [i] and [u] is analysed through the comparison of the High Frequency Energy (HFE) values obtained with realistic and simplified 3D geometries of the vocal tract. The simulations indicate that higher order modes are expected to be perceptually relevant according to reference values stated in the literature, particularly for tense phonations and/or high F0s. Conversely, vowels with a lax phonation and/or low F0s can result in inaudible HFE levels, especially if aspiration noise is not present in the glottal source. After this preliminary study, the excitation characteristics of happy and aggressive vowels from a Spanish parallel speech corpus are analysed with the aim of incorporating this tense voice expressive styles into the numerical production of voice. To that effect, the GlottDNN vocoder is used to analyse F0 and spectral tilt variations associated with the glottal excitation on vowels [a]. These variations are mapped through the comparison with synthetic vowels into F0 and Rd values to simulate vowels resembling happy and aggressive styles. Results show that it is necessary to increase F0 and decrease Rd with respect to neutral speech, with larger variations for happy than aggressive style, especially for the stressed [a] vowels. The results achieved in the conducted investigations validate the possibility of adding expressiveness to both corpus-based US-TTS synthesis and FEM-based numerical simulation of voice. Nevertheless, there is still room for improvement. For instance, the strategy applied to the numerical voice production could be improved by studying and developing inverse filtering approaches as well as incorporating modifications of the vocal tract, whereas the developed US-TTS&S framework could benefit from advances in voice transformation techniques including voice quality modifications, taking advantage of the experience gained in the numerical simulation of expressive vowels

    HMM-Based Speech Synthesis Utilizing Glottal Inverse Filtering

    Get PDF

    Voice source characterization for prosodic and spectral manipulation

    Get PDF
    The objective of this dissertation is to study and develop techniques to decompose the speech signal into its two main components: voice source and vocal tract. Our main efforts are on the glottal pulse analysis and characterization. We want to explore the utility of this model in different areas of speech processing: speech synthesis, voice conversion or emotion detection among others. Thus, we will study different techniques for prosodic and spectral manipulation. One of our requirements is that the methods should be robust enough to work with the large databases typical of speech synthesis. We use a speech production model in which the glottal flow produced by the vibrating vocal folds goes through the vocal (and nasal) tract cavities and its radiated by the lips. Removing the effect of the vocal tract from the speech signal to obtain the glottal pulse is known as inverse filtering. We use a parametric model fo the glottal pulse directly in the source-filter decomposition phase. In order to validate the accuracy of the parametrization algorithm, we designed a synthetic corpus using LF glottal parameters reported in the literature, complemented with our own results from the vowel database. The results show that our method gives satisfactory results in a wide range of glottal configurations and at different levels of SNR. Our method using the whitened residual compared favorably to this reference, achieving high quality ratings (Good-Excellent). Our full parametrized system scored lower than the other two ranking in third place, but still higher than the acceptance threshold (Fair-Good). Next we proposed two methods for prosody modification, one for each of the residual representations explained above. The first method used our full parametrization system and frame interpolation to perform the desired changes in pitch and duration. The second method used resampling on the residual waveform and a frame selection technique to generate a new sequence of frames to be synthesized. The results showed that both methods are rated similarly (Fair-Good) and that more work is needed in order to achieve quality levels similar to the reference methods. As part of this dissertation, we have studied the application of our models in three different areas: voice conversion, voice quality analysis and emotion recognition. We have included our speech production model in a reference voice conversion system, to evaluate the impact of our parametrization in this task. The results showed that the evaluators preferred our method over the original one, rating it with a higher score in the MOS scale. To study the voice quality, we recorded a small database consisting of isolated, sustained Spanish vowels in four different phonations (modal, rough, creaky and falsetto) and were later also used in our study of voice quality. Comparing the results with those reported in the literature, we found them to generally agree with previous findings. Some differences existed, but they could be attributed to the difficulties in comparing voice qualities produced by different speakers. At the same time we conducted experiments in the field of voice quality identification, with very good results. We have also evaluated the performance of an automatic emotion classifier based on GMM using glottal measures. For each emotion, we have trained an specific model using different features, comparing our parametrization to a baseline system using spectral and prosodic characteristics. The results of the test were very satisfactory, showing a relative error reduction of more than 20% with respect to the baseline system. The accuracy of the different emotions detection was also high, improving the results of previously reported works using the same database. Overall, we can conclude that the glottal source parameters extracted using our algorithm have a positive impact in the field of automatic emotion classification

    Reimagining Speech: A Scoping Review of Deep Learning-Powered Voice Conversion

    Full text link
    Research on deep learning-powered voice conversion (VC) in speech-to-speech scenarios is getting increasingly popular. Although many of the works in the field of voice conversion share a common global pipeline, there is a considerable diversity in the underlying structures, methods, and neural sub-blocks used across research efforts. Thus, obtaining a comprehensive understanding of the reasons behind the choice of the different methods in the voice conversion pipeline can be challenging, and the actual hurdles in the proposed solutions are often unclear. To shed light on these aspects, this paper presents a scoping review that explores the use of deep learning in speech analysis, synthesis, and disentangled speech representation learning within modern voice conversion systems. We screened 621 publications from more than 38 different venues between the years 2017 and 2023, followed by an in-depth review of a final database consisting of 123 eligible studies. Based on the review, we summarise the most frequently used approaches to voice conversion based on deep learning and highlight common pitfalls within the community. Lastly, we condense the knowledge gathered, identify main challenges and provide recommendations for future research directions

    Conveying expressivity and vocal effort transformation in synthetic speech with Harmonic plus Noise Models

    Get PDF
    Aquesta tesi s'ha dut a terme dins del Grup en de Tecnologies Mèdia (GTM) de l'Escola d'Enginyeria i Arquitectura la Salle. El grup te una llarga trajectòria dins del cap de la síntesi de veu i fins i tot disposa d'un sistema propi de síntesi per concatenació d'unitats (US-TTS) que permet sintetitzar diferents estils expressius usant múltiples corpus. De forma que per a realitzar una síntesi agressiva, el sistema usa el corpus de l'estil agressiu, i per a realitzar una síntesi sensual, usa el corpus de l'estil corresponent. Aquesta tesi pretén proposar modificacions del esquema del US-TTS que permetin millorar la flexibilitat del sistema per sintetitzar múltiples expressivitats usant només un únic corpus d'estil neutre. L'enfoc seguit en aquesta tesi es basa en l'ús de tècniques de processament digital del senyal (DSP) per aplicar modificacions de senyal a la veu sintetitzada per tal que aquesta expressi l'estil de parla desitjat. Per tal de dur a terme aquestes modificacions de senyal s'han usat els models harmònic més soroll per la seva flexibilitat a l'hora de realitzar modificacions de senyal. La qualitat de la veu (VoQ) juga un paper important en els diferents estils expressius. És per això que es va estudiar la síntesi de diferents emocions mitjançant la modificació de paràmetres de VoQ de baix nivell. D'aquest estudi es van identificar un conjunt de limitacions que van donar lloc als objectius d'aquesta tesi, entre ells el trobar un paràmetre amb gran impacte sobre els estils expressius. Per aquest fet l'esforç vocal (VE) es va escollir per el seu paper important en la parla expressiva. Primer es va estudiar la possibilitat de transferir l'VE entre dues realitzacions amb diferent VE de la mateixa paraula basant-se en la tècnica de predicció lineal adaptativa del filtre de pre-èmfasi (APLP). La proposta va permetre transferir l'VE correctament però presentava limitacions per a poder generar nivells intermitjos d'VE. Amb la finalitat de millorar la flexibilitat i control de l'VE expressat a la veu sintetitzada, es va proposar un nou model d'VE basat en polinomis lineals. Aquesta proposta va permetre transferir l'VE entre dues paraules qualsevols i sintetitzar nous nivells d'VE diferents dels disponibles al corpus. Aquesta flexibilitat esta alineada amb l'objectiu general d'aquesta tesi, permetre als sistemes US-TTS sintetitzar diferents estils expressius a partir d'un únic corpus d'estil neutre. La proposta realitzada també inclou un paràmetre que permet controlar fàcilment el nivell d'VE sintetitzat. Això obre moltes possibilitats per controlar fàcilment el procés de síntesi tal i com es va fer al projecte CreaVeu usant interfícies gràfiques simples i intuïtives, també realitzat dins del grup GTM. Aquesta memòria conclou presentant el treball realitzat en aquesta tesi i amb una proposta de modificació de l'esquema d'un sistema US-TTS per incloure els blocs de DSP desenvolupats en aquesta tesi que permetin al sistema sintetitzar múltiple nivells d'VE a partir d'un corpus d'estil neutre. Això obre moltes possibilitats per generar interfícies d'usuari que permetin controlar fàcilment el procés de síntesi, tal i com es va fer al projecte CreaVeu, també realitzat dins del grup GTM. Aquesta memòria conclou presentant el treball realitzat en aquesta tesi i amb una proposta de modificació de l'esquema del sistema US-TTS per incloure els blocs de DSP desenvolupats en aquesta tesi que permetin al sistema sintetitzar múltiple nivells d'VE a partir d'un corpus d'estil neutre.Esta tesis se llevó a cabo en el Grup en Tecnologies Mèdia de la Escuela de Ingeniería y Arquitectura la Salle. El grupo lleva una larga trayectoria dentro del campo de la síntesis de voz y cuenta con su propio sistema de síntesis por concatenación de unidades (US-TTS). El sistema permite sintetizar múltiples estilos expresivos mediante el uso de corpus específicos para cada estilo expresivo. De este modo, para realizar una síntesis agresiva, el sistema usa el corpus de este estilo, y para un estilo sensual, usa otro corpus específico para ese estilo. La presente tesis aborda el problema con un enfoque distinto proponiendo cambios en el esquema del sistema con el fin de mejorar la flexibilidad para sintetizar múltiples estilos expresivos a partir de un único corpus de estilo de habla neutro. El planteamiento seguido en esta tesis esta basado en el uso de técnicas de procesamiento de señales (DSP) para llevar a cabo modificaciones del señal de voz para que este exprese el estilo de habla deseado. Para llevar acabo las modificaciones de la señal de voz se han usado los modelos harmónico más ruido (HNM) por su flexibilidad para efectuar modificaciones de señales. La cualidad de la voz (VoQ) juega un papel importante en diferentes estilos expresivos. Por ello se exploró la síntesis expresiva basada en modificaciones de parámetros de bajo nivel de la VoQ. Durante este estudio se detectaron diferentes problemas que dieron pié a los objetivos planteados en esta tesis, entre ellos el encontrar un único parámetro con fuerte influencia en la expresividad. El parámetro seleccionado fue el esfuerzo vocal (VE) por su importante papel a la hora de expresar diferentes emociones. Las primeras pruebas se realizaron con el fin de transferir el VE entre dos realizaciones con diferente grado de VE de la misma palabra usando una metodología basada en un proceso filtrado de pre-émfasis adaptativo con coeficientes de predicción lineales (APLP). Esta primera aproximación logró transferir el nivel de VE entre dos realizaciones de la misma palabra, sin embargo el proceso presentaba limitaciones para generar niveles de esfuerzo vocal intermedios. A fin de mejorar la flexibilidad y el control del sistema para expresar diferentes niveles de VE, se planteó un nuevo modelo de VE basado en polinomios lineales. Este modelo permitió transferir el VE entre dos palabras diferentes e incluso generar nuevos niveles no presentes en el corpus usado para la síntesis. Esta flexibilidad está alineada con el objetivo general de esta tesis de permitir a un sistema US-TTS expresar múltiples estilos de habla expresivos a partir de un único corpus de estilo neutro. Además, la metodología propuesta incorpora un parámetro que permite de forma sencilla controlar el nivel de VE expresado en la voz sintetizada. Esto abre la posibilidad de controlar fácilmente el proceso de síntesis tal y como se hizo en el proyecto CreaVeu usando interfaces simples e intuitivas, también realizado dentro del grupo GTM. Esta memoria concluye con una revisión del trabajo realizado en esta tesis y con una propuesta de modificación de un esquema de US-TTS para expresar diferentes niveles de VE a partir de un único corpus neutro.This thesis was conducted in the Grup en Tecnologies M`edia (GTM) from Escola d’Enginyeria i Arquitectura la Salle. The group has a long trajectory in the speech synthesis field and has developed their own Unit-Selection Text-To-Speech (US-TTS) which is able to convey multiple expressive styles using multiple expressive corpora, one for each expressive style. Thus, in order to convey aggressive speech, the US-TTS uses an aggressive corpus, whereas for a sensual speech style, the system uses a sensual corpus. Unlike that approach, this dissertation aims to present a new schema for enhancing the flexibility of the US-TTS system for performing multiple expressive styles using a single neutral corpus. The approach followed in this dissertation is based on applying Digital Signal Processing (DSP) techniques for carrying out speech modifications in order to synthesize the desired expressive style. For conducting the speech modifications the Harmonics plus Noise Model (HNM) was chosen for its flexibility in conducting signal modifications. Voice Quality (VoQ) has been proven to play an important role in different expressive styles. Thus, low-level VoQ acoustic parameters were explored for conveying multiple emotions. This raised several problems setting new objectives for the rest of the thesis, among them finding a single parameter with strong impact on the expressive style conveyed. Vocal Effort (VE) was selected for conducting expressive speech style modifications due to its salient role in expressive speech. The first approach working with VE was based on transferring VE between two parallel utterances based on the Adaptive Pre-emphasis Linear Prediction (APLP) technique. This approach allowed transferring VE but the model presented certain restrictions regarding its flexibility for generating new intermediate VE levels. Aiming to improve the flexibility and control of the conveyed VE, a new approach using polynomial model for modelling VE was presented. This model not only allowed transferring VE levels between two different utterances, but also allowed to generate other VE levels than those present in the speech corpus. This is aligned with the general goal of this thesis, allowing US-TTS systems to convey multiple expressive styles with a single neutral corpus. Moreover, the proposed methodology introduces a parameter for controlling the degree of VE in the synthesized speech signal. This opens new possibilities for controlling the synthesis process such as the one in the CreaVeu project using a simple and intuitive graphical interfaces, also conducted in the GTM group. The dissertation concludes with a review of the conducted work and a proposal for schema modifications within a US-TTS system for introducing the VE modification blocks designed in this dissertation

    A review of state-of-the-art speech modelling methods for the parameterisation of expressive synthetic speech

    Get PDF
    This document will review a sample of available voice modelling and transformation techniques, in view of an application in expressive unit-selection based speech synthesis in the framework of the PAVOQUE project. The underlying idea is to introduce some parametric modification capabilities at the level of the synthesis system, in order to compensate for the sparsity and rigidity, in terms of available emotional speaking styles, of the databases used to define speech synthesis voices. For this work, emotion-related parametric modifications will be restricted to the domains of voice quality and prosody, as suggested by several reviews addressing the vocal correlates of emotions (Schröder, 2001; Schröder, 2004; Roehling et al., 2006). The present report will start with a review of some techniques related to voice quality modelling and modification. First, it will explore the techniques related to glottal flow modelling. Then, it will review the domain of cross-speaker voice transformations, in view of a transposition to the domain of cross-emotion voice transformations. This topic will be exposed from the perspective of the parametric spectral modelling of speech and then from the perspective of available spectral transformation techniques. Then, the domain of prosodic parameterisation and modification will be reviewed

    Analysis/Synthesis Comparison of Vocoders Utilized in Statistical Parametric Speech Synthesis

    Get PDF
    Tässä työssä esitetään kirjallisuuskatsaus ja kokeellinen osio tilastollisessa parametrisessa puhesynteesissä käytetyistä vokoodereista. Kokeellisessa osassa kolmen valitun vokooderin (GlottHMM, STRAIGHT ja Harmonic/Stochastic Model) analyysi-synteesi -ominaisuuksia tarkastellaan usealla tavalla. Suoritetut kokeet olivat vokooderiparametrien tilastollisten jakaumien analysointi, puheen tunnetilan tilastollinen vaikutus vokooderiparametrien jakaumiin sekä subjektiivinen kuuntelukoe jolla mitattiin vokooderien suhteellista analyysi-synteesi -laatua. Tulokset osoittavat että STRAIGHT-vokooderi omaa eniten Gaussiset parametrijakaumat ja tasaisimman synteesilaadun. GlottHMM-vokooderin parametrit osoittivat suurinta herkkyyttä puheen tunnetilan funktiona ja vokooderi sai parhaan, mutta laadultaan vaihtelevan kuuntelukoetuloksen. HSM-vokooderin LSF-parametrien havaittiin olevan Gaussisempia kuin GlottHMM-vokooderin LSF parametrit, mutta vokooderin havaittiin kärsivän kohinaherkkyydestä, ja se sai huonoimman kuuntelukoetuloksen.This thesis presents a literature study followed by an experimental part on the state-of-the-art vocoders utilized in statistical parametric speech synthesis. In the experimental part, the analysis/synthesis properties of three selected vocoders (GlottHMM, STRAIGHT and Harmonic/Stochastic Model) are examined. The performed tests were the analysis of vocoder parameter distributions, statistical testing on the effect of emotions to the vocoder parameter distributions, and a subjective listening test evaluating the vocoders' relative analysis/synthesis quality. The results indicate that the STRAIGHT vocoder has the most Gaussian parameter distributions and most robust synthesis quality, whereas the GlottHMM vocoder has the most emotion sensitive parameters and best but unreliable synthesis quality. The HSM vocoder's LSF parameters were found to be more Gaussian than the GlottHMM vocoder's LSF parameters. HSM was found to be sensitive to noise, and it scored the lowest score on the subjective listening test

    A Parametric Sound Object Model for Sound Texture Synthesis

    Get PDF
    This thesis deals with the analysis and synthesis of sound textures based on parametric sound objects. An overview is provided about the acoustic and perceptual principles of textural acoustic scenes, and technical challenges for analysis and synthesis are considered. Four essential processing steps for sound texture analysis are identifi ed, and existing sound texture systems are reviewed, using the four-step model as a guideline. A theoretical framework for analysis and synthesis is proposed. A parametric sound object synthesis (PSOS) model is introduced, which is able to describe individual recorded sounds through a fi xed set of parameters. The model, which applies to harmonic and noisy sounds, is an extension of spectral modeling and uses spline curves to approximate spectral envelopes, as well as the evolution of parameters over time. In contrast to standard spectral modeling techniques, this representation uses the concept of objects instead of concatenated frames, and it provides a direct mapping between sounds of diff erent length. Methods for automatic and manual conversion are shown. An evaluation is presented in which the ability of the model to encode a wide range of di fferent sounds has been examined. Although there are aspects of sounds that the model cannot accurately capture, such as polyphony and certain types of fast modulation, the results indicate that high quality synthesis can be achieved for many different acoustic phenomena, including instruments and animal vocalizations. In contrast to many other forms of sound encoding, the parametric model facilitates various techniques of machine learning and intelligent processing, including sound clustering and principal component analysis. Strengths and weaknesses of the proposed method are reviewed, and possibilities for future development are discussed
    • …
    corecore