93,682 research outputs found
MONICA in Hamburg: Towards Large-Scale IoT Deployments in a Smart City
Modern cities and metropolitan areas all over the world face new management
challenges in the 21st century primarily due to increasing demands on living
standards by the urban population. These challenges range from climate change,
pollution, transportation, and citizen engagement, to urban planning, and
security threats. The primary goal of a Smart City is to counteract these
problems and mitigate their effects by means of modern ICT to improve urban
administration and infrastructure. Key ideas are to utilise network
communication to inter-connect public authorities; but also to deploy and
integrate numerous sensors and actuators throughout the city infrastructure -
which is also widely known as the Internet of Things (IoT). Thus, IoT
technologies will be an integral part and key enabler to achieve many
objectives of the Smart City vision.
The contributions of this paper are as follows. We first examine a number of
IoT platforms, technologies and network standards that can help to foster a
Smart City environment. Second, we introduce the EU project MONICA which aims
for demonstration of large-scale IoT deployments at public, inner-city events
and give an overview on its IoT platform architecture. And third, we provide a
case-study report on SmartCity activities by the City of Hamburg and provide
insights on recent (on-going) field tests of a vertically integrated,
end-to-end IoT sensor application.Comment: 6 page
Context-aware adaptation in DySCAS
DySCAS is a dynamically self-configuring middleware for automotive control systems. The addition of autonomic, context-aware dynamic configuration to automotive control systems brings a potential for a wide range of benefits in terms of robustness, flexibility, upgrading etc. However, the automotive systems represent a particularly challenging domain for the deployment of autonomics concepts, having a combination of real-time performance constraints, severe resource limitations, safety-critical aspects and cost pressures. For these reasons current systems are statically configured. This paper describes the dynamic run-time configuration aspects of DySCAS and focuses on the extent to which context-aware adaptation has been achieved in DySCAS, and the ways in which the various design and implementation challenges are met
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
Programming MPSoC platforms: Road works ahead
This paper summarizes a special session on multicore/multi-processor system-on-chip (MPSoC) programming challenges. The current trend towards MPSoC platforms in most computing domains does not only mean a radical change in computer architecture. Even more important from a SW developer´s viewpoint, at the same time the classical sequential von Neumann programming model needs to be overcome. Efficient utilization of the MPSoC HW resources demands for radically new models and corresponding SW development tools, capable of exploiting the available parallelism and guaranteeing bug-free parallel SW. While several standards are established in the high-performance computing domain (e.g. OpenMP), it is clear that more innovations are required for successful\ud
deployment of heterogeneous embedded MPSoC. On the other hand, at least for coming years, the freedom for disruptive programming technologies is limited by the huge amount of certified sequential code that demands for a more pragmatic, gradual tool and code replacement strategy
Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms
The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications
Managed ecosystems of networked objects
Small embedded devices such as sensors and actuators will become the cornerstone of the Future Internet. To this end, generic, open and secure communication and service platforms are needed in order to be able to exploit the new business opportunities these devices bring. In this paper, we evaluate the current efforts to integrate sensors and actuators into the Internet and identify the limitations at the level of cooperation of these Internet-connected objects and the possible intelligence at the end points. As a solution, we propose the concept of Managed Ecosystem of Networked Objects, which aims to create a smart network architecture for groups of Internet-connected objects by combining network virtualization and clean-slate end-to-end protocol design. The concept maps to many real-life scenarios and should empower application developers to use sensor data in an easy and natural way. At the same time, the concept introduces many new challenging research problems, but their realization could offer a meaningful contribution to the realization of the Internet of Things
- …