Multi-criteria optimization for energy-efficient multi-core systems-on-chip

The steady down-scaling of transistor dimensions has made possible the evolutionary progress leading to today’s high-performance multi-GHz microprocessors and core based System-on-Chip (SoC) that offer superior performance, dramatically reduced cost per function, and much-reduced physical size compared to their predecessors. On the negative side, this rapid scaling however also translates to high power densities, higher operating temperatures and reduced reliability making it imperative to address design issues that have cropped up in its wake. In particular, the aggressive physical miniaturization have increased CMOS fault sensitivity to the extent that many reliability constraints pose threat to the device normal operation and accelerate the onset of wearout-based failures. Among various wearout-based failure mechanisms, Negative biased temperature instability (NBTI) has been recognized as the most critical source of device aging. The urge of reliable, low-power circuits is driving the EDA community to develop new design techniques, circuit solutions, algorithms, and software, that can address these critical issues. Unfortunately, this challenge is complicated by the fact that power and reliability are known to be intrinsically conflicting metrics: traditional solutions to improve reliability such as redundancy, increase of voltage levels, and up-sizing of critical devices do contrast with traditional low-power solutions, which rely on compact architectures, scaled supply voltages, and small devices. This dissertation focuses on methodologies to bridge this gap and establishes an important link between low-power solutions and aging effects. More specifically, we proposed new architectural solutions based on power management strategies to enable the design of low-power, aging aware cache memories. Cache memories are one of the most critical components for warranting reliable and timely operation. However, they are also more susceptible to aging effects. Due to symmetric structure of a memory cell, aging occurs regardless of the fact that a cell (or word) is accessed or not. Moreover, aging is a worst-case matric and line with worst-case access pattern determines the aging of the entire cache. In order to stop the aging of a memory cell, it must be put into a proper idle state when a cell (or word) is not accessed which require proper management of the idleness of each atomic unit of power management. We have proposed several reliability management techniques based on the idea of cache partitioning to alleviate NBTI-induced aging and obtain joint energy and lifetime benefits. We introduce graceful degradation mechanism which allows different cache blocks into which a cache is partitioned to age at different rates. This implies that various sub-blocks become unreliable at different times, and the cache keeps functioning with reduced efficiency. We extended the capabilities of this architecture by integrating the concept of reconfigurable caches to maintain the performance of the cache throughout its lifetime. By this strategy, whenever a block becomes unreliable, the remaining cache is reconfigured to work as a smaller size cache with only a marginal degradation of performance. Many mission-critical applications require guaranteed lifetime of their operations and therefore the hardware implementing their functionality. Such constraints are usually enforced by means of various reliability enhancing solutions mostly based on redundancy which are not energy-friendly. In our work, we have proposed a novel cache architecture in which a smart use of cache partitions for redundancy allows us to obtain cache that meet a desired lifetime target with minimal energy consumption

Characterisation of Novel Resistive Switching Memory Devices

Resistive random access memory (RRAM) is widely considered as a disruptive technology that will revolutionize not only non-volatile data storage, but also potentially digital logic and neuromorphic computing. The resistive switching mechanism is generally conceived as the rupture/restoration of defect-formed conductive filament (CF) or defect profile modulation, for filamentary and non-filamentary devices respectively. However, details of the underlying microscopic behaviour of the resistive switching in RRAM are still largely missing. In this thesis, a defect probing technique based on the random telegraph noise (RTN) is developed for both filamentary and non-filamentary devices, which can reveal the resistive switching mechanism at defect level and can also be used to analyse the device performance issues. HfO2 is one of the most matured metal-oxide materials in semiconductor industry and HfO2 RRAM shows promising potential in practical application. An RTN-based defect extraction technique is developed for the HfO2 devices to detect individual defect movement and provide statistical information of CF modification during normal operations. A critical filament region (CFR) is observed and further verified by defect movement tracking. Both defect movements and CFR modification are correlated with operation conditions, endurance failure and recovery. Non-filamentary devices have areal switching characteristics, and are promising in overcoming the drawbacks of filamentary devices that mainly come from the stochastic nature of the CF. a-VMCO is an outstanding non-filamentary device with a set of unique characteristics, but its resistive switching mechanism has not been clearly understood yet. By utilizing the RTN-based defect profiling technique, defect profile modulation in the switching layer is identified and correlated with digital and analogue switching behaviours, for the first time. State instability is analysed and a stable resistance window of 10 for >106 cycles is restored through combining optimizations of device structure and operation conditions, paving the way for its practical application. TaOx-based RRAM has shown fast switching in the sub-nanosecond regime, good CMOS compatibility and record endurance of more than 1012 cycles. Several inconsistent models have been proposed for the Ta2O5/TaOx bilayered structure, and it is difficult to quantify and optimize the performance, largely due to the lack of microscopic description of resistive switching based on experimental results. An indepth analysis of the TiN/Ta2O5/TaOx/TiN structured RRAM is carried out with the RTN-based defect probing technique, for both bipolar and unipolar switching modes. Significant differences in defect profile have been observed and explanations have been provided