Randomized cache placement for eliminating conflicts

Applications with regular patterns of memory access can experience high levels of cache conflict misses. In shared-memory multiprocessors conflict misses can be increased significantly by the data transpositions required for parallelization. Techniques such as blocking which are introduced within a single thread to improve locality, can result in yet more conflict misses. The tension between minimizing cache conflicts and the other transformations needed for efficient parallelization leads to complex optimization problems for parallelizing compilers. This paper shows how the introduction of a pseudorandom element into the cache index function can effectively eliminate repetitive conflict misses and produce a cache where miss ratio depends solely on working set behavior. We examine the impact of pseudorandom cache indexing on processor cycle times and present practical solutions to some of the major implementation issues for this type of cache. Our conclusions are supported by simulations of a superscalar out-of-order processor executing the SPEC95 benchmarks, as well as from cache simulations of individual loop kernels to illustrate specific effects. We present measurements of instructions committed per cycle (IPC) when comparing the performance of different cache architectures on whole-program benchmarks such as the SPEC95 suite.Peer ReviewedPostprint (published version

Software and hardware methods for memory access latency reduction on ILP processors

While microprocessors have doubled their speed every 18 months, performance improvement of memory systems has continued to lag behind. to address the speed gap between CPU and memory, a standard multi-level caching organization has been built for fast data accesses before the data have to be accessed in DRAM core. The existence of these caches in a computer system, such as L1, L2, L3, and DRAM row buffers, does not mean that data locality will be automatically exploited. The effective use of the memory hierarchy mainly depends on how data are allocated and how memory accesses are scheduled. In this dissertation, we propose several novel software and hardware techniques to effectively exploit the data locality and to significantly reduce memory access latency.;We first presented a case study at the application level that reconstructs memory-intensive programs by utilizing program-specific knowledge. The problem of bit-reversals, a set of data reordering operations extensively used in scientific computing program such as FFT, and an application with a special data access pattern that can cause severe cache conflicts, is identified in this study. We have proposed several software methods, including padding and blocking, to restructure the program to reduce those conflicts. Our methods outperform existing ones on both uniprocessor and multiprocessor systems.;The access latency to DRAM core has become increasingly long relative to CPU speed, causing memory accesses to be an execution bottleneck. In order to reduce the frequency of DRAM core accesses to effectively shorten the overall memory access latency, we have conducted three studies at this level of memory hierarchy. First, motivated by our evaluation of DRAM row buffer\u27s performance roles and our findings of the reasons of its access conflicts, we propose a simple and effective memory interleaving scheme to reduce or even eliminate row buffer conflicts. Second, we propose a fine-grain priority scheduling scheme to reorder the sequence of data accesses on multi-channel memory systems, effectively exploiting the available bus bandwidth and access concurrency. In the final part of the dissertation, we first evaluate the design of cached DRAM and its organization alternatives associated with ILP processors. We then propose a new memory hierarchy integration that uses cached DRAM to construct a very large off-chip cache. We show that this structure outperforms a standard memory system with an off-level L3 cache for memory-intensive applications.;Memory access latency has become a major performance bottleneck for memory-intensive applications. as long as DRAM technology remains its most cost-effective position for making main memory, the memory performance problem will continue to exist. The studies conducted in this dissertation attempt to address this important issue. Our proposed software and hardware schemes are effective and applicable, which can be directly used in real-world memory system designs and implementations. Our studies also provide guidance for application programmers to understand memory performance implications, and for system architects to optimize memory hierarchies

Re-designing Main Memory Subsystems with Emerging Monolithic 3D (M3D) Integration and Phase Change Memory Technologies

Over the past two decades, Dynamic Random-Access Memory (DRAM) has emerged as the dominant technology for implementing the main memory subsystems of all types of computing systems. However, inferring from several recent trends, computer architects in both the industry and academia have widely accepted that the density (memory capacity per chip area) and latency of DRAM based main memory subsystems cannot sufficiently scale in the future to meet the requirements of future data-centric workloads related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In fact, the achievable density and access latency in main memory subsystems presents a very fundamental trade-off. Pushing for a higher density inevitably increases access latency, and pushing for a reduced access latency often leads to a decreased density. This trade-off is so fundamental in DRAM based main memory subsystems that merely looking to re-architect DRAM subsystems cannot improve this trade-off, unless disruptive technological advancements are realized for implementing main memory subsystems. In this thesis, we focus on two key contributions to overcome the density (represented as the total chip area for the given capacity) and access latency related challenges in main memory subsystems. First, we show that the fundamental area-latency trade-offs in DRAM can be significantly improved by redesigning the DRAM cell-array structure using the emerging monolithic 3D (M3D) integration technology. A DRAM bank structure can be split across two or more M3D-integrated tiers on the same DRAM chip, to consequently be able to significantly reduce the total on-chip area occupancy of the DRAM bank and its access peripherals. This approach is fundamentally different from the well known approach of through-silicon vias (TSVs)-based 3D stacking of DRAM tiers. This is because the M3D integration based approach does not require a separate DRAM chip per tier, whereas the 3D-stacking based approach does. Our evaluation results for PARSEC benchmarks show that our designed M3D DRAM cellarray organizations can yield up to 9.56% less latency and up to 21.21% less energy-delay product (EDP), with up to 14% less DRAM die area, compared to the conventional 2D DDR4 DRAM. Second, we demonstrate a pathway for eliminating the write disturbance errors in single-level-cell PCM, thereby positioning the PCM technology, which has inherently more relaxed density and latency trade-off compared to DRAM, as a more viable option for replacing the DRAM technology. We introduce low-temperature partial-RESET operations for writing ‘0’s in PCM cells. Compared to traditional operations that write \u270\u27s in PCM cells, partial-RESET operations do not cause disturbance errors in neighboring cells during PCM writes. The overarching theme that connects the two individual contributions into this single thesis is the density versus latency argument. The existing PCM technology has 3 to 4× higher write latency compared to DRAM; nevertheless, the existing PCM technology can store 2 to 4 bits in a single cell compared to one bit per cell storage capacity of DRAM. Therefore, unlike DRAM, it becomes possible to increase the density of PCM without consequently increasing PCM latency. In other words, PCM exhibits inherently improved (more relaxed) density and latency trade-off. Thus, both of our contributions in this thesis, the first contribution of re-designing DRAM with M3D integration technology and the second contribution of making the PCM technology a more viable replacement of DRAM by eliminating the write disturbance errors in PCM, connect to the common overarching goal of improving the density and latency trade-off in main memory subsystems. In addition, we also discuss in this thesis possible future research directions that are aimed at extending the impacts of our proposed ideas so that they can transform the performance of main memory subsystems of the future

Cuckoo Directory: A Scalable Directory for Many-Core Systems

Growing core counts have highlighted the need for scalable on-chip coherence mechanisms. The increase in the number of on-chip cores exposes the energy and area costs of scaling the directories. Duplicate-tag based directories require highly associative structures that grow with core count, precluding scalability due to prohibitive power consumption. Sparse directories overcome the power barrier by reducing directory associativity, but require storage area over-provisioning to avoid high invalidation rates. We propose the Cuckoo directory, a power- and area-efficient scalable distributed directory. The cuckoo directory scales to high core counts without the energy costs of wide associative lookup and without gross capacity over-provisioning. Simulation of a 16-core CMP with commercial server and scientific workloads shows that the Cuckoo directory eliminates invalidations while being up to four times more power efficient than the Duplicate-tag directory and 24% more power-efficient and up to seven times more area efficient than the Sparse directory organization. Analytical projections indicate that the Cuckoo directory retains its energy and area benefits with increasing core count, efficiently scaling to at least 1024 cores

Protecting Cache States Against Both Speculative Execution Attacks and Side-channel Attacks

Hardware caches are essential performance optimization features in modern processors to reduce the effective memory access time. Unfortunately, they are also the prime targets for attacks on computer processors because they are high-bandwidth and reliable side or covert channels for leaking secrets. Conventional cache timing attacks typically leak secret encryption keys, while recent speculative execution attacks typically leak arbitrary illegally-obtained secrets through cache timing channels. While many hardware defenses have been proposed for each class of attacks, we show that those for conventional (non-speculative) cache timing channels do not work for all speculative execution attacks, and vice versa. We maintain that a cache is not secure unless it can defend against both of these major attack classes. We propose a new methodology and framework for covering such relatively large attack surfaces to produce a Speculative and Timing Attack Resilient (STAR) cache subsystem. We use this to design two comprehensive secure cache architectures, STAR-FARR and STAR-NEWS, that have very low performance overheads of 5.6% and 6.8%, respectively. To the best of our knowledge, these are the first secure cache designs that cover both non-speculative cache side channels and cache-based speculative execution attacks. Our methodology can be used to compose and check other secure cache designs. It can also be extended to other attack classes and hardware systems. Additionally, we also highlight the intrinsic security and performance benefits of a randomized cache like a real Fully Associative cache with Random Replacement (FARR) and a lower-latency, speculation-aware version (NEWS)

Doctor of Philosophy in Computing

dissertatio

Doctor of Philosophy

dissertationThe computing landscape is undergoing a major change, primarily enabled by ubiquitous wireless networks and the rapid increase in the use of mobile devices which access a web-based information infrastructure. It is expected that most intensive computing may either happen in servers housed in large datacenters (warehouse- scale computers), e.g., cloud computing and other web services, or in many-core high-performance computing (HPC) platforms in scientific labs. It is clear that the primary challenge to scaling such computing systems into the exascale realm is the efficient supply of large amounts of data to hundreds or thousands of compute cores, i.e., building an efficient memory system. Main memory systems are at an inflection point, due to the convergence of several major application and technology trends. Examples include the increasing importance of energy consumption, reduced access stream locality, increasing failure rates, limited pin counts, increasing heterogeneity and complexity, and the diminished importance of cost-per-bit. In light of these trends, the memory system requires a major overhaul. The key to architecting the next generation of memory systems is a combination of the prudent incorporation of novel technologies, and a fundamental rethinking of certain conventional design decisions. In this dissertation, we study every major element of the memory system - the memory chip, the processor-memory channel, the memory access mechanism, and memory reliability, and identify the key bottlenecks to efficiency. Based on this, we propose a novel main memory system with the following innovative features: (i) overfetch-aware re-organized chips, (ii) low-cost silicon photonic memory channels, (iii) largely autonomous memory modules with a packet-based interface to the proces- sor, and (iv) a RAID-based reliability mechanism. Such a system is energy-efficient, high-performance, low-complexity, reliable, and cost-effective, making it ideally suited to meet the requirements of future large-scale computing systems

Doctor of Philosophy

dissertationThe internet-based information infrastructure that has powered the growth of modern personal/mobile computing is composed of powerful, warehouse-scale computers or datacenters. These heavily subscribed datacenters perform data-processing jobs under intense quality of service guarantees. Further, high-performance compute platforms are being used to model and analyze increasingly complex scientific problems and natural phenomena. To ensure that the high-performance needs of these machines are met, it is necessary to increase the efficiency of the memory system that supplies data to the processing cores. Many of the microarchitectural innovations that were designed to scale the memory wall (e.g., out-of-order instruction execution, on-chip caches) are being rendered less effective due to several emerging trends (e.g., increased emphasis on energy consumption, limited access locality). This motivates the optimization of the main memory system itself. The key to an efficient main memory system is the memory controller. In particular, the scheduling algorithm in the memory controller greatly influences its performance. This dissertation explores this hypothesis in several contexts. It develops tools to better understand memory scheduling and develops scheduling innovations for CPUs and GPUs. We propose novel memory scheduling techniques that are strongly aware of the access patterns of the clients as well as the microarchitecture of the memory device. Based on these, we present (i) a Dynamic Random Access Memory (DRAM) chip microarchitecture optimized for reducing write-induced slowdown, (ii) a memory scheduling algorithm that exploits these features, (iii) several memory scheduling algorithms to reduce the memory-related stall experienced by irregular General Purpose Graphics Processing Unit (GPGPU) applications, and (iv) the Utah Simulated Memory Module (USIMM), a detailed, validated simulator for DRAM main memory that we use for analyzing and proposing scheduler algorithms

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Database System Acceleration on FPGAs

Relational database systems provide various services and applications with an efficient means for storing, processing, and retrieving their data. The performance of these systems has a direct impact on the quality of service of the applications that rely on them. Therefore, it is crucial that database systems are able to adapt and grow in tandem with the demands of these applications, ensuring that their performance scales accordingly. In the past, Moore's law and algorithmic advancements have been sufficient to meet these demands. However, with the slowdown of Moore's law, researchers have begun exploring alternative methods, such as application-specific technologies, to satisfy the more challenging performance requirements. One such technology is field-programmable gate arrays (FPGAs), which provide ideal platforms for developing and running custom architectures for accelerating database systems. The goal of this thesis is to develop a domain-specific architecture that can enhance the performance of in-memory database systems when executing analytical queries. Our research is guided by a combination of academic and industrial requirements that seek to strike a balance between generality and performance. The former ensures that our platform can be used to process a diverse range of workloads, while the latter makes it an attractive solution for high-performance use cases. Throughout this thesis, we present the development of a system-on-chip for database system acceleration that meets our requirements. The resulting architecture, called CbMSMK, is capable of processing the projection, sort, aggregation, and equi-join database operators and can also run some complex TPC-H queries. CbMSMK employs a shared sort-merge pipeline for executing all these operators, which results in an efficient use of FPGA resources. This approach enables the instantiation of multiple acceleration cores on the FPGA, allowing it to serve multiple clients simultaneously. CbMSMK can process both arbitrarily deep and wide tables efficiently. The former is achieved through the use of the sort-merge algorithm which utilizes the FPGA RAM for buffering intermediate sort results. The latter is achieved through the use of KeRRaS, a novel variant of the forward radix sort algorithm introduced in this thesis. KeRRaS allows CbMSMK to process a table a few columns at a time, incrementally generating the final result through multiple iterations. Given that acceleration is a key objective of our work, CbMSMK benefits from many performance optimizations. For instance, multi-way merging is employed to reduce the number of merge passes required for the execution of the sort-merge algorithm, thus improving the performance of all our pipeline-breaking operators. Another example is our in-depth analysis of early aggregation, which led to the development of a novel cache-based algorithm that significantly enhances aggregation performance. Our experiments demonstrate that CbMSMK performs on average 5 times faster than the state-of-the-art CPU-based database management system MonetDB.:I Database Systems & FPGAs 1 INTRODUCTION 1.1 Databases & the Importance of Performance 1.2 Accelerators & FPGAs 1.3 Requirements 1.4 Outline & Summary of Contributions 2 BACKGROUND ON DATABASE SYSTEMS 2.1 Databases 2.1.1 Storage Model 2.1.2 Storage Medium 2.2 Database Operators 2.2.1 Projection 2.2.2 Filter 2.2.3 Sort 2.2.4 Aggregation 2.2.5 Join 2.2.6 Operator Classification 2.3 Database Queries 2.4 Impact of Acceleration 3 BACKGROUND ON FPGAS 3.1 FPGA 3.1.1 Logic Element 3.1.2 Block RAM (BRAM) 3.1.3 Digital Signal Processor (DSP) 3.1.4 IO Element 3.1.5 Programmable Interconnect 3.2 FPGADesignFlow 3.2.1 Specifications 3.2.2 RTL Description 3.2.3 Verification 3.2.4 Synthesis, Mapping, Placement, and Routing 3.2.5 TimingAnalysis 3.2.6 Bitstream Generation and FPGA Programming 3.3 Implementation Quality Metrics 3.4 FPGA Cards 3.5 Benefits of Using FPGAs 3.6 Challenges of Using FPGAs 4 RELATED WORK 4.1 Summary of Related Work 4.2 Platform Type 4.2.1 Accelerator Card 4.2.2 Coprocessor 4.2.3 Smart Storage 4.2.4 Network Processor 4.3 Implementation 4.3.1 Loop-based implementation 4.3.2 Sort-based Implementation 4.3.3 Hash-based Implementation 4.3.4 Mixed Implementation 4.4 A Note on Quantitative Performance Comparisons II Cache-Based Morphing Sort-Merge with KeRRaS (CbMSMK) 5 OBJECTIVES AND ARCHITECTURE OVERVIEW 5.1 From Requirements to Objectives 5.2 Architecture Overview 5.3 Outlineof Part II 6 COMPARATIVE ANALYSIS OF OPENCL AND RTL FOR SORT-MERGE PRIMITIVES ON FPGAS 6.1 Programming FPGAs 6.2 RelatedWork 6.3 Architecture 6.3.1 Global Architecture 6.3.2 Sorter Architecture 6.3.3 Merger Architecture 6.3.4 Scalability and Resource Adaptability 6.4 Experiments 6.4.1 OpenCL Sort-Merge Implementation 6.4.2 RTLSorters 6.4.3 RTLMergers 6.4.4 Hybrid OpenCL-RTL Sort-Merge Implementation 6.5 Summary & Discussion 7 RESOURCE-EFFICIENT ACCELERATION OF PIPELINE-BREAKING DATABASE OPERATORS ON FPGAS 7.1 The Case for Resource Efficiency 7.2 Related Work 7.3 Architecture 7.3.1 Sorters 7.3.2 Sort-Network 7.3.3 X:Y Mergers 7.3.4 Merge-Network 7.3.5 Join Materialiser (JoinMat) 7.4 Experiments 7.4.1 Experimental Setup 7.4.2 Implementation Description & Tuning 7.4.3 Sort Benchmarks 7.4.4 Aggregation Benchmarks 7.4.5 Join Benchmarks 7. Summary 8 KERRAS: COLUMN-ORIENTED WIDE TABLE PROCESSING ON FPGAS 8.1 The Scope of Database System Accelerators 8.2 Related Work 8.3 Key-Reduce Radix Sort(KeRRaS) 8.3.1 Time Complexity 8.3.2 Space Complexity (Memory Utilization) 8.3.3 Discussion and Optimizations 8.4 Architecture 8.4.1 MSM 8.4.2 MSMK: Extending MSM with KeRRaS 8.4.3 Payload, Aggregation and Join Processing 8.4.4 Limitations 8.5 Experiments 8.5.1 Experimental Setup 8.5.2 Datasets 8.5.3 MSMK vs. MSM 8.5.4 Payload-Less Benchmarks 8.5.5 Payload-Based Benchmarks 8.5.6 Flexibility 8.6 Summary 9 A STUDY OF EARLY AGGREGATION IN DATABASE QUERY PROCESSING ON FPGAS 9.1 Early Aggregation 9.2 Background & Related Work 9.2.1 Sort-Based Early Aggregation 9.2.2 Cache-Based Early Aggregation 9.3 Simulations 9.3.1 Datasets 9.3.2 Metrics 9.3.3 Sort-Based Versus Cache-Based Early Aggregation 9.3.4 Comparison of Set-Associative Caches 9.3.5 Comparison of Cache Structures 9.3.6 Comparison of Replacement Policies 9.3.7 Cache Selection Methodology 9.4 Cache System Architecture 9.4.1 Window Aggregator 9.4.2 Compressor & Hasher 9.4.3 Collision Detector 9.4.4 Collision Resolver 9.4.5 Cache 9.5 Experiments 9.5.1 Experimental Setup 9.5.2 Resource Utilization and Parameter Tuning 9.5.3 Datasets 9.5.4 Benchmarks on Synthetic Data 9.5.5 Benchmarks on Real Data 9.6 Summary 10 THE FULL PICTURE 10.1 System Architecture 10.2 Benchmarks 10.3 Meeting the Objectives III Conclusion 11 SUMMARY AND OUTLOOK ON FUTURE RESEARCH 11.1 Summary 11.2 Future Work BIBLIOGRAPHY LIST OF FIGURES LIST OF TABLE