A thermal simulation process based on electrical modeling for complex interconnect, packaging, and 3DI structures

To reduce the product development time and achieve first-pass silicon success, fast and accurate estimation of very-large-scale integration (VLSI) interconnect, packaging and 3DI (3D integrated circuits) thermal profiles has become important. Present commercial thermal analysis tools are incapable of handling very complex structures and have integration difficulties with existing design flows. Many analytical thermal models, which could provide fast estimates, are either too specific or oversimplified. This paper highlights a methodology, which exploits electrical resistance solvers for thermal simulation, to allow acquisition of thermal profiles of complex structures with good accuracy and reasonable computation cost. Moreover, a novel accurate closed-form thermal model is developed. The model allows an isotropic or anisotropic equivalent medium to replace the noncritical back-end-of-line (BEOL) regions so that the simulation complexity is dramatically reduced. Using these techniques, this paper introduces the thermal modeling of practical complex VLSI structures to facilitate thermal guideline generation. It also demonstrates the benefits of the proposed anisotropic equivalent medium approximation for real VLSI structures in terms of the accuracy and computational cost. © 2006 IEEE.published_or_final_versio

Benchmark methodologies for the optimized physical synthesis of RISC-V microprocessors

As technology continues to advance and chip sizes shrink, the complexity and design time required for integrated circuits have significantly increased. To address these challenges, Electronic Design Automation (EDA) tools have been introduced to streamline the design flow. These tools offer various methodologies and options to optimize power, performance, and chip area. However, selecting the most suitable methods from these options can be challenging, as they may lead to trade-offs among power, performance, and area. While architectural and Register Transfer Level (RTL) optimizations have been extensively studied in existing literature, the impact of optimization methods available in EDA tools on performance has not been thoroughly researched. This thesis aims to optimize a semiconductor processor through EDA tools within the physical synthesis domain to achieve increased performance while maintaining a balance between power efficiency and area utilization. By leveraging floorplanning tools and carefully selecting technology libraries and optimization options, the CV32E40P open-source processor is subjected to various floorplans to analyze their impact on chip performance. The employed techniques, including multibit components prefer option, multiplexer tree prefer option, identification and exclusion of problematic cells, and placement blockages, lead to significant improvements in cell density, congestion mitigation, and timing. The optimized synthesis results demonstrate a 71\% enhancement in chip design performance without a substantial increase in area, showcasing the effectiveness of these techniques in improving large-scale integrated circuits' performance, efficiency, and manufacturability. By exploring and implementing the available options in EDA tools, this study demonstrates how the processor's performance can be significantly improved while maintaining a balanced and efficient chip design. The findings contribute valuable insights to the field of electronic design automation, offering guidance to designers in selecting suitable methodologies for optimizing processors and other integrated circuits

Rethinking Watermark: Providing Proof of IP Ownership in Modern SoCs

Intellectual property (IP) cores are essential to creating modern system-on-chips (SoCs). Protecting the IPs deployed in modern SoCs has become more difficult as the IP houses have been established across the globe over the past three decades. The threat posed by IP piracy and overuse has been a topic of research for the past decade or so and has led to creation of a field called watermarking. IP watermarking aims of detecting unauthorized IP usage by embedding excess, nonfunctional circuitry into the SoC. Unfortunately, prior work has been built upon assumptions that cannot be met within the modern SoC design and verification processes. In this paper, we first provide an extensive overview of the current state-of-the-art IP watermarking. Then, we challenge these dated assumptions and propose a new path for future effective IP watermarking approaches suitable for today\u27s complex SoCs in which IPs are deeply embedded

Analog Defect Injection and Fault Simulation Techniques: A Systematic Literature Review

Since the last century, the exponential growth of the semiconductor industry has led to the creation of tiny and complex integrated circuits, e.g., sensors, actuators, and smart power. Innovative techniques are needed to ensure the correct functionality of analog devices that are ubiquitous in every smart system. The ISO 26262 standard for functional safety in the automotive context specifies that fault injection is necessary to validate all electronic devices. For decades, standardization of defect modeling and injection mainly focused on digital circuits and, in a minor part, on analog ones. An initial attempt is being made with the IEEE P2427 draft standard that started to give a structured and formal organization to the analog testing field. Various methods have been proposed in the literature to speed up the fault simulation of the defect universe for an analog circuit. A more limited number of papers seek to reduce the overall simulation time by reducing the number of defects to be simulated. This literature survey describes the state-of-the-art of analog defect injection and fault simulation methods. The survey is based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodological flow, allowing for a systematic and complete literature survey. Each selected paper has been categorized and presented to provide an overview of all the available approaches. In addition, the limitations of the various approaches are discussed by showing possible future directions

Circuit Design

Circuit Design = Science + Art! Designers need a skilled "gut feeling" about circuits and related analytical techniques, plus creativity, to solve all problems and to adhere to the specifications, the written and the unwritten ones. You must anticipate a large number of influences, like temperature effects, supply voltages changes, offset voltages, layout parasitics, and numerous kinds of technology variations to end up with a circuit that works. This is challenging for analog, custom-digital, mixed-signal or RF circuits, and often researching new design methods in relevant journals, conference proceedings and design tools unfortunately gives the impression that just a "wild bunch" of "advanced techniques" exist. On the other hand, state-of-the-art tools nowadays indeed offer a good cockpit to steer the design flow, which include clever statistical methods and optimization techniques.Actually, this almost presents a second breakthrough, like the introduction of circuit simulators 40 years ago! Users can now conveniently analyse all the problems (discover, quantify, verify), and even exploit them, for example for optimization purposes. Most designers are caught up on everyday problems, so we fit that "wild bunch" into a systematic approach for variation-aware design, a designer's field guide and more. That is where this book can help! Circuit Design: Anticipate, Analyze, Exploit Variations starts with best-practise manual methods and links them tightly to up-to-date automation algorithms. We provide many tractable examples and explain key techniques you have to know. We then enable you to select and setup suitable methods for each design task - knowing their prerequisites, advantages and, as too often overlooked, their limitations as well. The good thing with computers is that you yourself can often verify amazing things with little effort, and you can use software not only to your direct advantage in solving a specific problem, but also for becoming a better skilled, more experienced engineer. Unfortunately, EDA design environments are not good at all to learn about advanced numerics. So with this book we also provide two apps for learning about statistic and optimization directly with circuit-related examples, and in real-time so without the long simulation times. This helps to develop a healthy statistical gut feeling for circuit design. The book is written for engineers, students in engineering and CAD / methodology experts. Readers should have some background in standard design techniques like entering a design in a schematic capture and simulating it, and also know about major technology aspects

Detection, diagnosis and modeling of ESD-induced soft failures - a gate-level and mixed-signal approach

Electronic systems are an indispensable part of people's lives today. However, the reliability of electronic systems can be threatened by external stimuli such as Electrostatic Discharges (ESDs). ESDs can either physically damage an electronic system or let it malfunction without damaging it. Therefore, a lot of design work and qualification testings are needed by manufacturers to improve the robustness against the negative effects of ESDs. The trial-and-error based solution implementation has incurred huge costs to companies in terms of labor and time. Despite the ever-increasing effort being devoted to solving ESD-related problems, cases of field returns still happen, and a significant portion can be attributed to soft failure induced by system-level ESD. Despite that, the ESD-induced permanent failures are well-studied and protection mechanisms have proven to work, the studies on ESD-induced soft failures are all on the physical and transistor level. In this thesis, we studied ESD-induced soft failures by first conducting case studies of injecting ESDs into physical devices and observing the application level symptoms of the failures, and then performing simulation-based ESD injections on a well-known instruction-set-architecture. For the first time, we correlated the physical level ESD event to high-level system behavior. We implemented a mixed-signal-simulation-based fault injection environment and device models to allow ESDs to be injected to target systems. By injecting different types of ESDs into the target system, we, for the first time, identified gate-level bit-flip patterns from a SPICE level high-voltage event. Our experimental results show that the extent of register value corruption can be single-bit or widespread, and the bit flips manifested can affect the system in multiple ways. We also demonstrated low-cost protection measures for some of the failures resulted

Circuit Design

Circuit Design = Science + Art! Designers need a skilled "gut feeling" about circuits and related analytical techniques, plus creativity, to solve all problems and to adhere to the specifications, the written and the unwritten ones. You must anticipate a large number of influences, like temperature effects, supply voltages changes, offset voltages, layout parasitics, and numerous kinds of technology variations to end up with a circuit that works. This is challenging for analog, custom-digital, mixed-signal or RF circuits, and often researching new design methods in relevant journals, conference proceedings and design tools unfortunately gives the impression that just a "wild bunch" of "advanced techniques" exist. On the other hand, state-of-the-art tools nowadays indeed offer a good cockpit to steer the design flow, which include clever statistical methods and optimization techniques.Actually, this almost presents a second breakthrough, like the introduction of circuit simulators 40 years ago! Users can now conveniently analyse all the problems (discover, quantify, verify), and even exploit them, for example for optimization purposes. Most designers are caught up on everyday problems, so we fit that "wild bunch" into a systematic approach for variation-aware design, a designer's field guide and more. That is where this book can help! Circuit Design: Anticipate, Analyze, Exploit Variations starts with best-practise manual methods and links them tightly to up-to-date automation algorithms. We provide many tractable examples and explain key techniques you have to know. We then enable you to select and setup suitable methods for each design task - knowing their prerequisites, advantages and, as too often overlooked, their limitations as well. The good thing with computers is that you yourself can often verify amazing things with little effort, and you can use software not only to your direct advantage in solving a specific problem, but also for becoming a better skilled, more experienced engineer. Unfortunately, EDA design environments are not good at all to learn about advanced numerics. So with this book we also provide two apps for learning about statistic and optimization directly with circuit-related examples, and in real-time so without the long simulation times. This helps to develop a healthy statistical gut feeling for circuit design. The book is written for engineers, students in engineering and CAD / methodology experts. Readers should have some background in standard design techniques like entering a design in a schematic capture and simulating it, and also know about major technology aspects

Modeling techniques and verification methodologies for substrate coupling effects in mixed-signal system-on-chip designs

The substrate noise coupling problems in today's complex mixed-signal system-on-chip (MS-SOC) brings a new set of challenges for designers. In this paper, we propose a global methodology that includes an early verification in the design flow as well as a postlayout iterative optimization to deal with substrate noise, and helps designers to achieve a first silicon-success of their chips. An improved semi-analytical modeling technique exploiting the basic behaviors of this noise is developed. This method significantly accelerates the substrate modeling, avoids the dense matrix storage, and, hence, enables the implementation of an iterative noise-immunity optimization loop working at full-chip level. The integration of the methodology in a typical mixed-signal design flow is illustrated and its successful application to achieve a single-chip integration of a transceiver is demonstrated

Optimierung der Energie und Power getriebenen Architekturexploration für Multicore und heterogenes System on Chip

The contribution of this work builds on top of the established virtual prototype platforms to improve both SoC design quality and productivity. Initially, an automatic system-level power estimation framework was developed to address the critical issue of early power estimation in SoC design. The estimation framework models the static and dynamic power consumption of the hardware components. These models are created from the normalized values of the basic design components of SoC, obtained through one-time power simulation of RTL hardware models. The framework allows dynamic technology node reconfiguration for power estimation models. Its instantaneous power reporting aids the detection of possible hotspot early into the design process. Adding this additional data in conjunction with a steadily growing design space of complex heterogeneous SoC, finding the right parameter configuration is a challenging and laborious task for a system-level designer. This work addresses this bottleneck by optimizing the design space exploration (DSE) process for MPSoC design. An automatic DSE framework for virtual platforms (VPs) was developed which is flexible and allows the selection optimal parameter configuration without pre-existing knowledge. To reduce exploration time, the framework is equipped with several multi-objective optimization techniques based on simulated annealing and a genetic algorithm. Lastly, to aid HW/SW partitioning at system-level, a flexible and automated workflow (SW2TLM) is presented. It allows the designer to explore various possible partitioning scenarios without going into depth of the hardware architecture complexity and software integration. The framework generates system-level hardware accelerators from corresponding functionality encoded in the software code and integrates them into the VP. Power consumption and time speedups of acceleration is reported to the designer, which further increases the quality and productivity of the development process towards the final architecture. The presented tools are evaluated using a state-of-the-art VP for a range of single and multi-core applications. Viewing the energy delay product, a reduction in exploration time was recorded at approximately 62% (worst case), maintaining optimal parameter accuracy of 90% compared to previous techniques. While the SW2TLM further increases the exploration versatility by combining modern high-level synthesis with system-level architectural exploration.Der Beitrag dieser Arbeit baut auf dem etablierten Konzept der virtuellen Prototyp (VP) Plattformen auf, um die Qualität und die Produktivität des Entwurfsprozesses zu verbessern. Zunächst wurde ein automatisches System-Level-Framework entwickelt, um Verlustleistungsabschätzung für SoC-Designs in einer deutlich früheren Entwicklungsphase zu ermöglichen. Hierfür werden statischen und dynamischen Energieverbrauchsanteile individueller Hardwareelemente durch ein abstraktes Modell ausgedrückt. Das Framework ermöglicht eine dynamische Anpassung des Technologieknotens sowie die Integration neuer Leistungsmodelle für Drittanbieterkomponenten. Die kontinuierliche Erfassung der Energieverbrauchseigenschaften und ihre grafische Darstellung Benutzeroberfläche unterstützt zusätzlich die frühzeitige Identifikation möglicher Hotspots. Durch die Bereitstellung zusätzlicher Daten, in Verbindung mit einem stetig wachsenden Entwurfsraum komplexer SoCs, ist die Identifikation der richtigen Parameterkonfiguration eine zeitintensive Aufgabe. Die vorgelegten Konzepte erlauben eine gesteigerte Automatisierung des Explorationsprozesses. Techniken der mehrdimensionalen Optimierung, basierend auf Simulated Annealing und genetischer Algorithmen erlauben die Identifikation von geeigneten Konfigurationen ohne vorheriges Wissen oder Erfahrungswerte Schließlich wurde zur Unterstützung der HW/SW -Partitionierung auf System-Ebene ein flexibler und automatisierter Workflow entwickelt. Er ermöglicht es dem Designer verschiedene mögliche Partitionierungsszenarien zu untersuchen, ohne sich in die Komplexität der Hardwarearchitektur und der Softwareintegration zu vertiefen. Das Framework erzeugt abstrakte Beschleunigermodelle aus entsprechenden Softwarefunktionen und integriert sie nahtlos in den ausführbare VP. Detaillierte Daten zum Energieverbrauch, Beschleunigungsfaktor und Kommunikationsoverhead der Partitionierung werden erfasst und dem Designer zur Verfügung gestellt, was die Qualität und Produktivität des weiter erhöht. Die vorgestellten Tools werden mit einer modernen VP für verschiedene SW-Anwendungen evaluiert. Bei Betrachtung des Energieverzögerungsprodukts wurde eine Verringerung der Explorationszeit um mehr als 62% bei 90% Parametergenauigkeit festgestell. Darauf aufbauend, erleichtert die automatisierte Untersuchung verschiedener HW/SW Partitionierungen die Entwicklung heterogener Architekturen durch die Kombination moderner HLS mit Architektur-Exploration auf der Systemebene