13,114 research outputs found

    Feasibility of an Electro-Optic Link for Bondpad-less CMOS Lab-on-Chips

    No full text
    This paper explores the feasibility of developing CMOS-based lab-on-chips to analyse the properties of a fluid, without the need for bond wires. Both inductive and electro-optical schemes are suggested as possible solutions. Specifically, this paper details a novel approach in achieving electro-optical modulation in unmodified, commercially-available CMOS technology. By exploiting the plasma dispersion effect, it is shown how mid-infrared light can be modulated using parasitic structures designed in a CMOS integrated circuit. Both the fundamental theory and practical realisation are supported with measured data from an experimental setup.Accepted versio

    Evanescent Waveguide Sensor for On-Chip Biomolecular Detection

    Get PDF
    This work presents analysis and development of an evanescent waveguide sensor system, which integrates an amorphous silicon photodiode and a glass-diffused waveguide. Design of the system includes a study of thickness and refractive index of the transparent electrode of the diode, which are crucial parameters for the optimization of the optical coupling between the waveguide and the photodetector. Preliminary electro-optical measurements on the fabricated device show excellent system performances, and suggest its use for on-chip detection in lab-on-chip applications

    High-Responsivity Graphene-Boron Nitride Photodetector and Autocorrelator in a Silicon Photonic Integrated Circuit

    Full text link
    Graphene and other two-dimensional (2D) materials have emerged as promising materials for broadband and ultrafast photodetection and optical modulation. These optoelectronic capabilities can augment complementary metal-oxide-semiconductor (CMOS) devices for high-speed and low-power optical interconnects. Here, we demonstrate an on-chip ultrafast photodetector based on a two-dimensional heterostructure consisting of high-quality graphene encapsulated in hexagonal boron nitride. Coupled to the optical mode of a silicon waveguide, this 2D heterostructure-based photodetector exhibits a maximum responsivity of 0.36 A/W and high-speed operation with a 3 dB cut-off at 42 GHz. From photocurrent measurements as a function of the top-gate and source-drain voltages, we conclude that the photoresponse is consistent with hot electron mediated effects. At moderate peak powers above 50 mW, we observe a saturating photocurrent consistent with the mechanisms of electron-phonon supercollision cooling. This nonlinear photoresponse enables optical on-chip autocorrelation measurements with picosecond-scale timing resolution and exceptionally low peak powers

    An Optical Modulator in Unmodified, Commercially Available CMOS Technology

    No full text

    Review on the development of truly portable and in-situ capillary electrophoresis systems

    No full text
    Capillary electrophoresis (CE) is a technique which uses an electric field to separate a mixed sample into its constituents. Portable CE systems enable this powerful analysis technique to be used in the field. Many of the challenges for portable systems are similar to those of autonomous in-situ analysis and therefore portable systems may be considered a stepping stone towards autonomous in-situ analysis. CE is widely used for biological and chemical analysis and example applications include: water quality analysis; drug development and quality control; proteomics and DNA analysis; counter-terrorism (explosive material identification) and corrosion monitoring. The technique is often limited to laboratory use, since it requires large electric fields, sensitive detection systems and fluidic control systems. All of these place restrictions in terms of: size, weight, cost, choice of operating solutions, choice of fabrication materials, electrical power and lifetime. In this review we bring together and critique the work by researchers addressing these issues. We emphasize the importance of a holistic approach for portable and in-situ CE systems and discuss all the aspects of the design. We identify gaps in the literature which require attention for the realization of both truly portable and in-situ CE systems

    Simultaneous measurements of electrophoretic and dielectrophoretic forces using optical tweezers

    Get PDF
    Herein, charged microbeads handled with optical tweezers are used as a sensitive probe for simultaneous measurements of electrophoretic and dielectrophoretic forces. We first determine the electric charge carried by a single bead by keeping it in a predictable uniform electric field produced by two parallel planar electrodes, then, we examine same bead's response in proximity to a tip electrode. In this case, besides electric forces, the bead simultaneously experiences non-negligible dielectrophoretic forces produced by the strong electric field gradient. The stochastic and deterministic motions of the trapped bead are theoretically and experimentally analysed in terms of the autocorrelation function. By fitting the experimental data, we are able to extract simultaneously the spatial distribution of electrophoretic and dielectrophoretic forces around the tip. Our approach can be used for determining actual, total force components in the presence of high-curvature electrodes or metal scanning probe tips.Comment: 9 pages, 3 figure
    corecore