306 research outputs found
Topology Construction in RPL Networks over Beacon-Enabled 802.15.4
In this paper, we propose a new scheme that allows coupling beacon-enabled
IEEE 802.15.4 with the RPL routing protocol while keeping full compliance with
both standards. We provide a means for RPL to pass the routing information to
Layer 2 before the 802.15.4 topology is created by encapsulating RPL DIO
messages in beacon frames. The scheme takes advantage of 802.15.4 command
frames to solicit RPL DIO messages. The effect of the command frames is to
reset the Trickle timer that governs sending DIO messages. We provide a
detailed analysis of the overhead incurred by the proposed scheme to understand
topology construction costs. We have evaluated the scheme using Contiki and the
instruction-level Cooja simulator and compared our results against the most
common scheme used for dissemination of the upper-layer information in
beacon-enabled PANs. The results show energy savings during the topology
construction phase and in the steady state
Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?
The adoption of Software Defined Networking (SDN) within traditional networks
has provided operators the ability to manage diverse resources and easily
reconfigure networks as requirements change. Recent research has extended this
concept to IEEE 802.15.4 low-power wireless networks, which form a key
component of the Internet of Things (IoT). However, the multiple traffic
patterns necessary for SDN control makes it difficult to apply this approach to
these highly challenging environments. This paper presents Atomic-SDN, a highly
reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN
introduces a novel Synchronous Flooding (SF) architecture capable of
dynamically configuring SF protocols to satisfy complex SDN control
requirements, and draws from the authors' previous experiences in the IEEE EWSN
Dependability Competition: where SF solutions have consistently outperformed
other entries. Using this approach, Atomic-SDN presents considerable
performance gains over other SDN implementations for low-power IoT networks. We
evaluate Atomic-SDN through simulation and experimentation, and show how
utilizing SF techniques provides latency and reliability guarantees to SDN
control operations as the local mesh scales. We compare Atomic-SDN against
other SDN implementations based on the IEEE 802.15.4 network stack, and
establish that Atomic-SDN improves SDN control by orders-of-magnitude across
latency, reliability, and energy-efficiency metrics
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
Let the Tree Bloom: Scalable Opportunistic Routing with ORPL
Routing in battery-operated wireless networks is challenging, posing a tradeoff between energy and latency. Previous work has shown that opportunistic routing can achieve low-latency data collection in duty-cycled networks. However, applications are now considered where nodes are not only periodic data sources, but rather addressable end points generating traffic with arbitrary patterns.
We present ORPL, an opportunistic routing protocol that supports any-to-any, on-demand traffic. ORPL builds upon RPL, the standard protocol for low-power IPv6 networks. By combining RPL's tree-like topology with opportunistic routing, ORPL forwards data to any destination based on the mere knowledge of the nodes' sub-tree. We use bitmaps and Bloom filters to represent and propagate this information in a space-efficient way, making ORPL scale to large networks of addressable nodes. Our results in a 135-node testbed show that ORPL outperforms a number of state-of-the-art solutions including RPL and CTP, conciliating a sub-second latency and a sub-percent duty cycle. ORPL also increases robustness and scalability, addressing the whole network reliably through a 64-byte Bloom filter, where RPL needs kilobytes of routing tables for the same task
Use of Clustering-based Routing Protocols in Low Power and Lossy Networks � A Survey
Internet of Things (IoT) is the one of the emerging field today, which consists of various resource-constrained devices that are limited in resources and work in the lossy wireless network. Therefore, IoT requires efficient routing protocol so that devices can communicate fast and power efficiently. Among different protocols available for wireless networks, Routing Protocol for Low Power and Lossy Networks (RPL) is a protocol specially standardized by IETF for efficient communication between IoT devices. Routing technique is one of the important factors of a routing protocol, which affects the performance of a protocol. In recent years, researchers contributed to improving RPL performance by providing various solutions and clustering is one of those ways to improve RPL performance by using Cluster- parent based Destination Oriented Directed Acyclic Graph (DODAG). In this paper, we discuss the various clustering-based routing protocols in a Low power and lossy networks (LLNs) and concludes that this survey might be helpful for future researchers
Performance analysis of Routing Protocol for Low power and Lossy Networks (RPL) in large scale networks
With growing needs to better understand our environments, the Internet-of-Things (IoT) is gaining importance among information and communication technologies. IoT will enable billions of intelligent devices and networks, such as wireless sensor networks (WSNs), to be connected and integrated with computer networks. In order to support large scale networks, IETF has defined the Routing Protocol for Low power and Lossy Networks (RPL) to facilitate the multi-hop connectivity. In this paper, we provide an in-depth review of current research activities. Specifically, the large scale simulation development and performance evaluation under various objective functions and routing metrics are pioneering works in RPL study. The results are expected to serve as a reference for evaluating the effectiveness of routing solutions in large scale IoT use cases
Poster Abstract: Low-Power Wireless IPv6 Routing with ContikiRPL
RPL is the IETF candidate standard for IPv6 routing in low-power wireless sensor networks. We present the first experimental results of RPL which we have obtained with our ContikiRPL implementation. Our results show that Tmote Sky motes running IPv6 with RPL routing have a battery lifetime of years, while delivering 0.6 packets per second to a sink node
- …