11,976 research outputs found
Large scale probabilistic available bandwidth estimation
The common utilization-based definition of available bandwidth and many of
the existing tools to estimate it suffer from several important weaknesses: i)
most tools report a point estimate of average available bandwidth over a
measurement interval and do not provide a confidence interval; ii) the commonly
adopted models used to relate the available bandwidth metric to the measured
data are invalid in almost all practical scenarios; iii) existing tools do not
scale well and are not suited to the task of multi-path estimation in
large-scale networks; iv) almost all tools use ad-hoc techniques to address
measurement noise; and v) tools do not provide enough flexibility in terms of
accuracy, overhead, latency and reliability to adapt to the requirements of
various applications. In this paper we propose a new definition for available
bandwidth and a novel framework that addresses these issues. We define
probabilistic available bandwidth (PAB) as the largest input rate at which we
can send a traffic flow along a path while achieving, with specified
probability, an output rate that is almost as large as the input rate. PAB is
expressed directly in terms of the measurable output rate and includes
adjustable parameters that allow the user to adapt to different application
requirements. Our probabilistic framework to estimate network-wide
probabilistic available bandwidth is based on packet trains, Bayesian
inference, factor graphs and active sampling. We deploy our tool on the
PlanetLab network and our results show that we can obtain accurate estimates
with a much smaller measurement overhead compared to existing approaches.Comment: Submitted to Computer Network
Verifiable Network-Performance Measurements
In the current Internet, there is no clean way for affected parties to react
to poor forwarding performance: when a domain violates its Service Level
Agreement (SLA) with a contractual partner, the partner must resort to ad-hoc
probing-based monitoring to determine the existence and extent of the
violation. Instead, we propose a new, systematic approach to the problem of
forwarding-performance verification. Our mechanism relies on voluntary
reporting, allowing each domain to disclose its loss and delay performance to
its neighbors; it does not disclose any information regarding the participating
domains' topology or routing policies beyond what is already publicly
available. Most importantly, it enables verifiable performance measurements,
i.e., domains cannot abuse it to significantly exaggerate their performance.
Finally, our mechanism is tunable, allowing each participating domain to
determine how many resources to devote to it independently (i.e., without any
inter-domain coordination), exposing a controllable trade-off between
performance-verification quality and resource consumption. Our mechanism comes
at the cost of deploying modest functionality at the participating domains'
border routers; we show that it requires reasonable processing and memory
resources within modern network capabilities.Comment: 14 page
Distributed Collaborative Monitoring in Software Defined Networks
We propose a Distributed and Collaborative Monitoring system, DCM, with the
following properties. First, DCM allow switches to collaboratively achieve flow
monitoring tasks and balance measurement load. Second, DCM is able to perform
per-flow monitoring, by which different groups of flows are monitored using
different actions. Third, DCM is a memory-efficient solution for switch data
plane and guarantees system scalability. DCM uses a novel two-stage Bloom
filters to represent monitoring rules using small memory space. It utilizes the
centralized SDN control to install, update, and reconstruct the two-stage Bloom
filters in the switch data plane. We study how DCM performs two representative
monitoring tasks, namely flow size counting and packet sampling, and evaluate
its performance. Experiments using real data center and ISP traffic data on
real network topologies show that DCM achieves highest measurement accuracy
among existing solutions given the same memory budget of switches
An Energy and Performance Exploration of Network-on-Chip Architectures
In this paper, we explore the designs of a circuit-switched router, a wormhole router, a quality-of-service (QoS) supporting virtual channel router and a speculative virtual channel router and accurately evaluate the energy-performance tradeoffs they offer. Power results from the designs placed and routed in a 90-nm CMOS process show that all the architectures dissipate significant idle state power. The additional energy required to route a packet through the router is then shown to be dominated by the data path. This leads to the key result that, if this trend continues, the use of more elaborate control can be justified and will not be immediately limited by the energy budget. A performance analysis also shows that dynamic resource allocation leads to the lowest network latencies, while static allocation may be used to meet QoS goals. Combining the power and performance figures then allows an energy-latency product to be calculated to judge the efficiency of each of the networks. The speculative virtual channel router was shown to have a very similar efficiency to the wormhole router, while providing a better performance, supporting its use for general purpose designs. Finally, area metrics are also presented to allow a comparison of implementation costs
JamLab: Augmenting Sensornet Testbeds with Realistic and Controlled Interference Generation
Radio interference drastically affects the performance of sensor-net communications, leading to packet loss and reduced energy-efficiency. As an increasing number of wireless devices operates on the same ISM frequencies, there is a strong need for understanding and debugging the performance of existing sensornet protocols under interference. Doing so requires a low-cost flexible testbed infrastructure that allows the repeatable generation of a wide range of interference patterns. Unfortunately, to date, existing sensornet testbeds lack such capabilities, and do not permit to study easily the coexistence problems between devices sharing the same frequencies. This paper addresses the current lack of such an infrastructure by using off-the-shelf sensor motes to record and playback interference patterns as well as to generate customizable and repeat-able interference in real-time. We propose and develop JamLab: a low-cost infrastructure to augment existing sensornet testbeds with accurate interference generation while limiting the overhead to a simple upload of the appropriate software. We explain how we tackle the hardware limitations and get an accurate measurement and regeneration of interference, and we experimentally evaluate the accuracy of JamLab with respect to time, space, and intensity. We further use JamLab to characterize the impact of interference on sensornet MAC protocols
Optimal Elephant Flow Detection
Monitoring the traffic volumes of elephant flows, including the total byte
count per flow, is a fundamental capability for online network measurements. We
present an asymptotically optimal algorithm for solving this problem in terms
of both space and time complexity. This improves on previous approaches, which
can only count the number of packets in constant time. We evaluate our work on
real packet traces, demonstrating an up to X2.5 speedup compared to the best
alternative.Comment: Accepted to IEEE INFOCOM 201
- âŠ