Detection of Magnetic Fields Using Fibre Optic Interferometric Sensors.

The principle aim of the work described in this thesis is to determine a suitable optical detection system for d.c. and low frequency magnetic fields which are likely to be encountered in practical magnetometer applications. To construct a sensitive magneotmeter one arm of an optical fibre Mach-Zehnder interferometer has been magnetically sensitised using a magnetostrictive material. Since the signal frequency range of interest was in the region of 0.01 to 10Hz, clearly the signal was in the same frequency band as the environmental noise associated with ambient temperature and pressure variations. Initially, a technique was developed to measure the magnetic field from the shift of the total fringe pattern generated by a modified Mach-Zehnder interferometer and a minimum detectable magnetic field of 10e-7 tesla.m. was obtained. This minimum detectable magnetic field has been improved by a number of modifications. A technique has been developed which utilises an a.c. bias field to put the magnetic signal on a carrier so that it can be measured at a frequency where the amplitude of the interferometer 1/f noise is much reduced. To maintain maximum interferometric sensitivity to this signal active homodyne demodulation techniques have been developed to maintain the interferometer at quadrature by compensating for the environmental noise. A minimum detectable magnetic field of 5x10e-10 tesla.m. has been achieved with this system. As an alternative to the Mach-Zehnder interferometer a Fabry-Perot interferometer, which utilises multiple-beam interference, has been considered. This type of interferometer consists of a single fibre with high reflectivity coatings on its ends. Such an interferometer has been used as a sensor and as an external cavity in laser frequency stabilisation scheme

Magnetoelectric Sensor Systems and Applications

In the field of magnetic sensing, a wide variety of different magnetometer and gradiometer sensor types, as well as the corresponding read-out concepts, are available. Well-established sensor concepts such as Hall sensors and magnetoresistive sensors based on giant magnetoresistances (and many more) have been researched for decades. The development of these types of sensors has reached maturity in many aspects (e.g., performance metrics, reliability, and physical understanding), and these types of sensors are established in a large variety of industrial applications. Magnetic sensors based on the magnetoelectric effect are a relatively new type of magnetic sensor. The potential of magnetoelectric sensors has not yet been fully investigated. Especially in biomedical applications, magnetoelectric sensors show several advantages compared to other concepts for their ability, for example, to operate in magnetically unshielded environments and the absence of required cooling or heating systems. In recent years, research has focused on understanding the different aspects influencing the performance of magnetoelectric sensors. At Kiel University, Germany, the Collaborative Research Center 1261 “Magnetoelectric Sensors: From Composite Materials to Biomagnetic Diagnostics”, funded by the German Research Foundation, has dedicated its work to establishing a fundamental understanding of magnetoelectric sensors and their performance parameters, pushing the performance of magnetoelectric sensors to the limits and establishing full magnetoelectric sensor systems in biological and clinical practice

Charakterisierung funktionaler Nanomaterialien für biomagnetische Sensoren und Atemanalyse

The presented thesis is covering materials aspects for the development of magnetoelectric sensors for biomagnetic sensing and solid state sensors for breath monitoring. The electrophysiological signals of the human body and especially their irregularities provide extremely valuable information about the heart, brain or nerve malfunction in medical diagnostics. Similar and even more detailed information is contained in the generated biomagnetic fields which measurement offers improved diagnostics and treatment of the patients. A new type of room temperature operable magnetoelectric composite sensors is developed in the framework of the CRC1261 Magnetoelectric Sensors: From Composite Materials to Biomagnetic Diagnostics. This thesis focuses on the individual materials structure-property relations and their combination in magnetoelectric composite sensors studied by electron beam based techniques, at lengths scales ranging from micrometers to atomic resolution. The first part of this thesis highlights selected studies on the structural and analytic aspects of single phase materials and their composites using TEM as the primary method of investigation. With respect to the piezoelectric phase, alternatives to AlN have been thoroughly investigated to seek for improvement of specific sensor approaches. In this context, the alloying of Sc into the AlN matrix has been demonstrated to yield high quality films with improved piezoelectric and unprecedented ferroelectric properties grown under the control of deposition parameters. Lead-free titanate films with large piezo-coefficients at the verge of the morphotropic phase boundary as alternative to PZT films have been investigated in terms of crystal symmetry, defect structure and domains of cation ordering. New morphologies of ZnO and GaN semiconductors envisioned for a piezotronic-based sensor approach were subject of in-depth defect and analytical studies describing intrinsic defects and lattice strains upon deposition as well as hollow composite structures. When the dimensions of a materials are reduced, novel exciting properties such as in-plane piezoelectricity can arise in planar transition-metal dichalcogenides. Here, the turbostratic disorder in a few-layered MoSe2 film has been investigated by nanobeam electron diffraction and Fast Fourier Transformations. From the perspective of magnetic materials, the atomic structure of magnetostrictive multilayers of FeCo/TiN showing stability up to elevated temperatures has been analyzed in detail regarding the crystallographic relationship of heteroepitaxy in multilayer composites exhibiting individual layer thicknesses below 1 nm. Further, magnetic hard layers have been investigated in the context of exchange spring concepts and ME composites based on shape memory alloy substrates have been studied regarding structural changes implied by different annealing processes. The second part of this thesis introduces materials aspects and sensor studies on gas detection in the clinical context of breath analysis. The detection of specific vapors in the human breath is of medical relevance, since certain species can be enriched depending on the conditions and processes within the human body. Hence, they can be regarded as biomarkers for the patients condition of health. The selection of suitable materials and the gas measurement working principle are considered and selected studies on solid state sensors with different surface functionalization or targeted application on basis of ZnO or CuO-oxide and Fe-oxide species are presented

Infrared Radiation

This book represents a collection of scientific articles covering the field of infrared radiation. It offers extensive information about current scientific research and engineering developments in this area. Each chapter has been thoroughly revised and each represents significant contribution to the scientific community interested in this matter. Developers of infrared technique, technicians using infrared equipment and scientist that have interest in infrared radiation and its interaction with medium will comprise the main readership as they search for current studies on the use of infrared radiation. Moreover this book can be useful to students and postgraduates with appropriate specialty and also for multifunctional workers

ESSE 2017. Proceedings of the International Conference on Environmental Science and Sustainable Energy

Environmental science is an interdisciplinary academic field that integrates physical-, biological-, and information sciences to study and solve environmental problems. ESSE - The International Conference on Environmental Science and Sustainable Energy provides a platform for experts, professionals, and researchers to share updated information and stimulate the communication with each other. In 2017 it was held in Suzhou, China June 23-25, 2017

Laboratory Directed Research and Development Program FY 2004 Annual Report

The Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD) Program reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2A, 'Laboratory Directed Research and Development' (January 8, 2001), which establishes DOE's requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report describes all ORNL LDRD research activities supported during FY 2004 and includes final reports for completed projects and shorter progress reports for projects that were active, but not completed, during this period. The FY 2004 ORNL LDRD Self-Assessment (ORNL/PPA-2005/2) provides financial data about the FY 2004 projects and an internal evaluation of the program's management process. ORNL is a DOE multiprogram science, technology, and energy laboratory with distinctive capabilities in materials science and engineering, neutron science and technology, energy production and end-use technologies, biological and environmental science, and scientific computing. With these capabilities ORNL conducts basic and applied research and development (R&D) to support DOE's overarching national security mission, which encompasses science, energy resources, environmental quality, and national nuclear security. As a national resource, the Laboratory also applies its capabilities and skills to the specific needs of other federal agencies and customers through the DOE Work For Others (WFO) program. Information about the Laboratory and its programs is available on the Internet at <http://www.ornl.gov/>. LDRD is a relatively small but vital DOE program that allows ORNL, as well as other multiprogram DOE laboratories, to select a limited number of R&D projects for the purpose of: (1) maintaining the scientific and technical vitality of the Laboratory; (2) enhancing the Laboratory's ability to address future DOE missions; (3) fostering creativity and stimulating exploration of forefront science and technology; (4) serving as a proving ground for new research; and (5) supporting high-risk, potentially high-value R&D. Through LDRD the Laboratory is able to improve its distinctive capabilities and enhance its ability to conduct cutting-edge R&D for its DOE and WFO sponsors. To meet the LDRD objectives and fulfill the particular needs of the Laboratory, ORNL has established a program with two components: the Director's R&D Fund and the Seed Money Fund. As outlined in Table 1, these two funds are complementary. The Director's R&D Fund develops new capabilities in support of the Laboratory initiatives, while the Seed Money Fund is open to all innovative ideas that have the potential for enhancing the Laboratory's core scientific and technical competencies. Provision for multiple routes of access to ORNL LDRD funds maximizes the likelihood that novel and seminal ideas with scientific and technological merit will be recognized and supported