952 research outputs found
A scalable hardware and software control apparatus for experiments with hybrid quantum systems
Modern experiments with fundamental quantum systems - like ultracold atoms,
trapped ions, single photons - are managed by a control system formed by a
number of input/output electronic channels governed by a computer. In hybrid
quantum systems, where two or more quantum systems are combined and made to
interact, establishing an efficient control system is particularly challenging
due to the higher complexity, especially when each single quantum system is
characterized by a different timescale. Here we present a new control apparatus
specifically designed to efficiently manage hybrid quantum systems. The
apparatus is formed by a network of fast communicating Field Programmable Gate
Arrays (FPGAs), the action of which is administrated by a software. Both
hardware and software share the same tree-like structure, which ensures a full
scalability of the control apparatus. In the hardware, a master board acts on a
number of slave boards, each of which is equipped with an FPGA that locally
drives analog and digital input/output channels and radiofrequency (RF) outputs
up to 400 MHz. The software is designed to be a general platform for managing
both commercial and home-made instruments in a user-friendly and intuitive
Graphical User Interface (GUI). The architecture ensures that complex control
protocols can be carried out, such as performing of concurrent commands loops
by acting on different channels, the generation of multi-variable error
functions and the implementation of self-optimization procedures. Although
designed for managing experiments with hybrid quantum systems, in particular
with atom-ion mixtures, this control apparatus can in principle be used in any
experiment in atomic, molecular, and optical physics.Comment: 10 pages, 12 figure
Calibration of DAC mismatch errors in sigma delta ADCs based on a sine-wave measurement
We present an offline calibration procedure to correct the nonlinearity due element mismatch in the digital-to-analog converter (DAC) of a multibit Sigma Delta-modulation A/D converter. The calibration uses a single measurement on a sinusoidal input signal, from which the DAC errors can be estimated. The main quality of the calibration method is that it can be implemented completely in the digital domain (or in software) and does not intervene in any way in the analog modulator circuit. This way, the technique is a powerful tool for verifying and debugging designs. Due to the simplicity of the method, it may be also a viable approach for factory calibration
Design of Energy-Efficient A/D Converters with Partial Embedded Equalization for High-Speed Wireline Receiver Applications
As the data rates of wireline communication links increases, channel impairments such as skin effect, dielectric loss, fiber dispersion, reflections and cross-talk become more pronounced. This warrants more interest in analog-to-digital converter (ADC)-based serial link receivers, as they allow for more complex and flexible back-end digital signal processing (DSP) relative to binary or mixed-signal receivers. Utilizing this back-end DSP allows for complex digital equalization and more bandwidth-efficient modulation schemes, while also displaying reduced process/voltage/temperature (PVT) sensitivity. Furthermore, these architectures offer straightforward design translation and can directly leverage the area and power scaling offered by new CMOS technology nodes. However, the power consumption of the ADC front-end and subsequent digital signal processing is a major issue. Embedding partial equalization inside the front-end ADC can potentially result in lowering the complexity of back-end DSP and/or decreasing the ADC resolution requirement, which results in a more energy-effcient receiver. This dissertation presents efficient implementations for multi-GS/s time-interleaved ADCs with partial embedded equalization. First prototype details a 6b 1.6GS/s ADC with a novel embedded redundant-cycle 1-tap DFE structure in 90nm CMOS. The other two prototypes explain more complex 6b 10GS/s ADCs with efficiently embedded feed-forward equalization (FFE) and decision feedback equalization (DFE) in 65nm CMOS. Leveraging a time-interleaved successive approximation ADC architecture, new structures for embedded DFE and FFE are proposed with low power/area overhead. Measurement results over FR4 channels verify the effectiveness of proposed embedded equalization schemes. The comparison of fabricated prototypes against state-of-the-art general-purpose ADCs at similar speed/resolution range shows comparable performances, while the proposed architectures include embedded equalization as well
CMOS Data Converters for Closed-Loop mmWave Transmitters
With the increased amount of data consumed in mobile communication systems, new solutions for the infrastructure are needed. Massive multiple input multiple output (MIMO) is seen as a key enabler for providing this increased capacity. With the use of a large number of transmitters, the cost of each transmitter must be low. Closed-loop transmitters, featuring high-speed data converters is a promising option for achieving this reduced unit cost.In this thesis, both digital-to-analog (D/A) and analog-to-digital (A/D) converters suitable for wideband operation in millimeter wave (mmWave) massive MIMO transmitters are demonstrated. A 2
76 bit radio frequency digital-to-analog converter (RF-DAC)-based in-phase quadrature (IQ) modulator is demonstrated as a compact building block, that to a large extent realizes the transmit path in a closed-loop mmWave transmitter. The evaluation of an successive-approximation register (SAR) analog-to-digital converter (ADC) is also presented in this thesis. Methods for connecting simulated and measured performance has been studied in order to achieve a better understanding about the alternating comparator topology.These contributions show great potential for enabling closed-loop mmWave transmitters for massive MIMO transmitter realizations
Recommended from our members
Design and implementation of Radix-3/Radix-2 based novel hybrid SAR ADC in scaled CMOS technologies
This thesis focuses on low power and high speed design techniques for successive
approximation register (SAR) analog-to-digital converters (ADCs) in nanoscale
CMOS technologies. SAR ADCs’ speed is limited by the number of bits of
resolution. An N-bit conventional SAR ADC takes N conversion cycles. To speed
up the conversion process, we introduce a radix-3 SAR ADC which can compute
1:6 bits per cycle. To our knowledge, it is the first fully programmable and efficiently
hardware controlled radix-3 SAR ADC. We had to use two comparators per
cycle due to ADC architecture and we proposed a simple calibration scheme for
the comparators. Also, as the architecture of the DAC array is completely different
from the architecture of conventional radix-2 SAR ADC’s DAC arrays, we came up
with an algorithm for calibration of capacitors of the DAC.
Low power SAR ADCs face two major challenges especially at high resolutions:
(1) increased comparator power to suppress the noise, and (2) increased
DAC switching energy due to the large DAC size. Due to our proposed architecture,the radix-3 SAR ADC uses two comparators per cycle and two differential DACs.
To improve the comparator’s power efficiency, an efficient and low cost calibration
technique has been introduced. It allows a low power and noisy comparator to
achieve high signal-to-noise ratio (SNR).
To improve the DAC switching energy, we introduced a radix-3/radix-2
based novel hybrid SAR ADC. We use two single ended DACs for radix-3 SAR
ADC and these two single ended DACs can be used as one differential DAC for
radix-2 SAR ADC. So, overall, we only have a single DAC as conventional radix-
2 SAR ADC. In addition, a monotonic switching technique is adopted for radix-2
search to reduce the DAC capacitor size and hence, to reduce switching power. It
can reduce the total number of unit capacitors by four times. Our proposed hybrid
SAR ADC can achieve less DAC energy compared to radix-3 and radix-2 SAR
ADCs. Also, to utilize technology scaling, we used the minimum capacitor size
allowed by thermal noise limitations. To achieve high resolution, we introduced
calibration algorithm for the DAC array.
As mentioned earlier, the radix-3 SAR ADC offers higher power than conventional
radix-2 SAR ADC because of simultaneous use of two comparators. In
the proposed hybrid SAR ADC, we will be using radix-3 search for first few MSB
bits. So, the resolution required for radix-3 comparators are much larger than the
LSB value of 10-bit ADC. By implementing calibration of comparators, we can
use low power, high input referred offset and high speed comparators for radix-3
search. Radix-2 search will be used for rest of the bits and the resolution of the
radix-2 comparator has to be less than the required LSB value. So, a high power, low input referred offset and high speed comparator is used for radix-2 search.
Also, we introduced clock gating for comparators. So, radix-3 comparators will not
toggle during radix-2 search and the radix-2 comparators will be inactive during
radix-3 search. By using the aforementioned techniques, the overall comparator
power is definitely less than a radix-3 SAR ADC and comparable to a conventional
radix-2 SAR ADC.
A prototype radix-3/radix-2 based hybrid SAR ADC with the proposed
technique is designed and fabricated in 40nm CMOS technology. It achieves an
SNDR of 56.9 dB and consumes only 0.38 mW power at 30MS/s, leading to a
Walden figure of merit of 21.5 fJ/conv-step.Electrical and Computer Engineerin
Wideband CMOS Data Converters for Linear and Efficient mmWave Transmitters
With continuously increasing demands for wireless connectivity, higher\ua0carrier frequencies and wider bandwidths are explored. To overcome a limited transmit power at these higher carrier frequencies, multiple\ua0input multiple output (MIMO) systems, with a large number of transmitters\ua0and antennas, are used to direct the transmitted power towards\ua0the user. With a large transmitter count, each individual transmitter\ua0needs to be small and allow for tight integration with digital circuits. In\ua0addition, modern communication standards require linear transmitters,\ua0making linearity an important factor in the transmitter design.In this thesis, radio frequency digital-to-analog converter (RF-DAC)-based transmitters are explored. They shift the transition from digital\ua0to analog closer to the antennas, performing both digital-to-analog\ua0conversion and up-conversion in a single block. To reduce the need for\ua0computationally costly digital predistortion (DPD), a linear and wellbehaved\ua0RF-DAC transfer characteristic is desirable. The combination\ua0of non-overlapping local oscillator (LO) signals and an expanding segmented\ua0non-linear RF-DAC scaling is evaluated as a way to linearize\ua0the transmitter. This linearization concept has been studied both for\ua0the linearization of the RF-DAC itself and for the joint linearization of\ua0the cascaded RF-DAC-based modulator and power amplifier (PA) combination.\ua0To adapt the linearization, observation receivers are needed.\ua0In these, high-speed analog-to-digital converters (ADCs) have a central\ua0role. A high-speed ADC has been designed and evaluated to understand\ua0how concepts used to increase the sample rate affect the dynamic performance
Concepts for smart AD and DA converters
This thesis studies the `smart' concept for application to analog-to-digital and digital-to-analog converters. The smart concept aims at improving performance - in a wide sense - of AD/DA converters by adding on-chip intelligence to extract imperfections and to correct for them. As the smart concept can correct for certain imperfections, it can also enable the use of more efficient architectures, thus yielding an additional performance boost. Chapter 2 studies trends and expectations in converter design with respect to applications, circuit design and technology evolution. Problems and opportunities are identfied, and an overview of performance criteria is given. Chapter 3 introduces the smart concept that takes advantage of the expected opportunities (described in chapter 2) in order to solve the anticipated problems. Chapter 4 applies the smart concept to digital-to-analog converters. In the discussed example, the concept is applied to reduce the area of the analog core of a current-steering DAC. It is shown that a sub-binary variable-radix approach reduces the area of the current-source elements substantially (10x compared to state-of-the-art), while maintaining accuracy by a self-measurement and digital pre-correction scheme. Chapter 5 describes the chip implementation of the sub-binary variable-radix DAC and discusses the experimental results. The results confirm that the sub-binary variable-radix design can achieve the smallest published current-source-array area for the given accuracy (12bit). Chapter 6 applies the smart concept to analog-to-digital converters, with as main goal the improvement of the overall performance in terms of a widely used figure-of-merit. Open-loop circuitry and time interleaving are shown to be key to achieve high-speed low-power solutions. It is suggested to apply a smart approach to reduce the effect of the imperfections, unintentionally caused by these key factors. On high-level, a global picture of the smart solution is proposed that can solve the problems while still maintaining power-efficiency. Chapter 7 deals with the design of a 500MSps open-loop track-and-hold circuit. This circuit is used as a test case to demonstrate the proposed smart approaches. Experimental results are presented and compared against prior art. Though there are several limitations in the design and the measurement setup, the measured performance is comparable to existing state-of-the-art. Chapter 8 introduces the first calibration method that counteracts the accuracy issues of the open-loop track-and-hold. A description of the method is given, and the implementation of the detection algorithm and correction circuitry is discussed. The chapter concludes with experimental measurement results. Chapter 9 introduces the second calibration method that targets the accuracy issues of time-interleaved circuits, in this case a 2-channel version of the implemented track-and-hold. The detection method, processing algorithm and correction circuitry are analyzed and their implementation is explained. Experimental results verify the usefulness of the method
- …