A novel target state detection method for accurate cardiopulmonary signal extraction based on FMCW radar signals

Frequency-modulated continuous wave radar is capable of constant, real-time detection of human presence and monitoring of cardiopulmonary signals such as respiration and heartbeat. In highly cluttered environments or when the human body moves randomly, noise signals may be relatively large in some range bins, making it crucial to accurately select the range bin containing the target cardiopulmonary signal. In this paper, we propose a target range bin selection algorithm based on a mixed-modal information threshold. We introduce a confidence value in the frequency domain to determine the state of the human target and employ the range bin variance in the time domain to determine the range bin change status of the target. The proposed method accurately detects the state of the target and effectively selects the range bin containing the cardiopulmonary signal with a high signal-to-noise ratio. Experimental results demonstrate that the proposed method achieves better accuracy in cardiopulmonary signal rate estimation. Moreover, the proposed algorithm is lightweight in data processing and has good real-time performance

Design and Implementation of a Low‐Power Wireless Respiration Monitoring Sensor

Wireless devices for monitoring of respiration activities can play a major role in advancing modern home-based health care applications. Existing methods for respiration monitoring require special algorithms and high precision filters to eliminate noise and other motion artifacts. These necessitate additional power consuming circuitry for further signal conditioning. This dissertation is particularly focused on a novel approach of respiration monitoring based on a PVDF-based pyroelectric transducer. Low-power, low-noise, and fully integrated charge amplifiers are designed to serve as the front-end amplifier of the sensor to efficiently convert the charge generated by the transducer into a proportional voltage signal. To transmit the respiration data wirelessly, a lowpower transmitter design is crucial. This energy constraint motivates the exploration of the design of a duty-cycled transmitter, where the radio is designed to be turned off most of the time and turned on only for a short duration of time. Due to its inherent duty-cycled nature, impulse radio ultra-wideband (IR-UWB) transmitter is an ideal candidate for the implementation of a duty-cycled radio. To achieve better energy efficiency and longer battery lifetime a low-power low-complexity OOK (on-off keying) based impulse radio ultra-wideband (IR-UWB) transmitter is designed and implemented using standard CMOS process. Initial simulation and test results exhibit a promising advancement towards the development of an energy-efficient wireless sensor for monitoring of respiration activities

Near field sensing and antenna design for wireless body area network

PhD ThesisWireless body area network (WBAN) has emerged in recent years as a special class of wireless sensor network; hence, WBAN inherits the wireless sensor network challenges of interference by passive objects in indoor environments. However, attaching wireless nodes to a person’s body imposes a unique challenge, presented by continuous changes in the working environment, due to the normal activities of the monitored personnel. Basic activities, like sitting on a metallic chair or standing near a metallic door, drastically change the antenna behaviour when the metallic object is within the antenna near field. Although antenna coupling with the human body has been investigated by many recent studies, the coupling of the WBAN node antenna with other objects within the surrounding environment has not been thoroughly studied. To address the problems above, the thesis investigates the state-of-the art of WBAN, eximanes the influence of metallic object near an antenna through experimental studies and proposes antenna design and their applications for near field environments. This thesis philosophy for the previously mentioned challenge is to examine and improve the WBAN interaction with its surrounding by enabling the WBAN node to detect nearby objects based solely on change in antenna measurements. The thesis studies the interference caused by passive objects on WBAN node antenna and extracts relevant features to sense the object presence within the near field, and proposes new design of WBAN antenna suitable for this purpose. The major contributions of this study can be summarised as follows. First, it observes and defines the changes in the return loss of a narrow band antenna when a metallic object is introduced in its near field. Two methods were proposed to detect the object, based on the refelction coefficient and transmission coefficient of an antenna in free space. Then, the thesis introduces a new antenna design that conforms to the WBAN requirements of size, while achieving very low sensitivity to human body. This was achieved through combining two opposite Vivaldi shapes on one PCB and using a metallic sheet to act as a reflector, which minimised the antenna coupling with the human body and reduced the radiation pattern towards the body. Finally, the proposed antennas were tested on several human body parts with nearby metallic objects, to compare the change in antenna s-parameters due to presence of the human body and presence of the metallic object. Based on the measurements, basic statistical indicators and Principal Component Analysis were proposed to detect object presense and estimate its distance. In conclusion, the thesis successfully shows WBAN antenna’s ability to detect nearby metallic objects through a set of proposed indicators and novel antenna design. The thesis is wrapped up by the suggestion to investigate time domain features and modulated signal for future work in WBAN near field sensing

Towards localisation with Doppler radar

In this thesis the author introduces a novel method for Geo Localisation via Doppler Radar. The area of research is in the three dimensional space using amplitude and magnitude measurements. Geo Localisation in mobile applications is a useful technology that enables monitoring and gathering information about objects of interest

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Roadmap on signal processing for next generation measurement systems

Signal processing is a fundamental component of almost any sensor-enabled system, with a wide range of applications across different scientific disciplines. Time series data, images, and video sequences comprise representative forms of signals that can be enhanced and analysed for information extraction and quantification. The recent advances in artificial intelligence and machine learning are shifting the research attention towards intelligent, data-driven, signal processing. This roadmap presents a critical overview of the state-of-the-art methods and applications aiming to highlight future challenges and research opportunities towards next generation measurement systems. It covers a broad spectrum of topics ranging from basic to industrial research, organized in concise thematic sections that reflect the trends and the impacts of current and future developments per research field. Furthermore, it offers guidance to researchers and funding agencies in identifying new prospects.AerodynamicsMicrowave Sensing, Signals & System

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Recent Advances in Indoor Localization Systems and Technologies

Despite the enormous technical progress seen in the past few years, the maturity of indoor localization technologies has not yet reached the level of GNSS solutions. The 23 selected papers in this book present the recent advances and new developments in indoor localization systems and technologies, propose novel or improved methods with increased performance, provide insight into various aspects of quality control, and also introduce some unorthodox positioning methods