Efficient processor management strategies for multicomputer systems

Multicomputers are cost-effective alternatives to the conventional supercomputers. Contemporary processor management schemes tend to underutilize the processors and leave many of the processors in the system idle while jobs are waiting for execution;Instead of designing faster processors or interconnection networks, a substantial performance improvement can be obtained by implementing better processor management strategies. This dissertation studies the performance issues related to the processor management schemes and proposes several ways to enhance the multicomputer systems by means of processor management. The proposed schemes incorporate the concepts of size-reduction, non-contiguous allocation, as well as job migration. Job scheduling using a bypass-queue is also studied. All the proposed schemes are proven effective in improving the system performance via extensive simulations. Each proposed scheme has different implementation cost and constraints. In order to take advantage of these schemes, judicious selection of system parameters is important and is discussed

Processor allocator for chip multiprocessors

Chip MultiProcessor (CMP) architectures consisting of many cores connected through Network-on-Chip (NoC) are becoming main computing platforms for research and computer centers, and in the future for commercial solutions. In order to effectively use CMPs, operating system is an important factor and it should support a multiuser environment in which many parallel jobs are executed simultaneously. It is done by the processor management system of the operating system, which consists of two components: Job Scheduler (JS) and Processor Allocator (PA). The JS is responsible for job scheduling that deals with selection of the next job to be executed, while the task of the PA is processor allocation that selects a set of processors for the job selected by the JS. In this thesis, the PA architecture for the NoC-based CMP is explored. The idea of the PA hardware implementation and its integration on one die together with processing elements of CMP is presented. Such an approach requires the PA to be fast as well as area and energy efficient, because it is only a small component of the CMP. The architecture of hardware version of a PA is presented. The main factor of the structure is a type of processor allocation algorithm, employed inside. Thus, all important allocation techniques are intensively investigated and new schemes are proposed. All of them are compared using experimentation system. The PA driven by the described allocation techniques is synthesized on FPGA and crucial energy and area consumption together with performance parameters are extracted. The proposed CMP uses NoC as interconnection architecture. Therefore, all main NoC structures are studied and tested. Most important parameters such as topology, flow control and routing algorithms are presented and discussed. For the proposed NoC structures, an energy model is proposed and described. Finally, the synthesized PAs and NoCs are evaluated in a simulation system, where NoC-based CMP is created. The experimental environment took into consideration energy and traffic balance characteristics. As a result, the most efficient PA and NoC for CMP are presented

Dimensionerings- en werkverdelingsalgoritmen voor lambda grids

Grids bestaan uit een verzameling reken- en opslagelementen die geografisch verspreid kunnen zijn, maar waarvan men de gezamenlijke capaciteit wenst te benutten. Daartoe dienen deze elementen verbonden te worden met een netwerk. Vermits veel wetenschappelijke applicaties gebruik maken van een Grid, en deze applicaties doorgaans grote hoeveelheden data verwerken, is het noodzakelijk om een netwerk te voorzien dat dergelijke grote datastromen op betrouwbare wijze kan transporteren. Optische transportnetwerken lenen zich hier uitstekend toe. Grids die gebruik maken van dergelijk netwerk noemt men lambda Grids. Deze thesis beschrijft een kader waarin het ontwerp en dimensionering van optische netwerken voor lambda Grids kunnen beschreven worden. Ook wordt besproken hoe werklast kan verdeeld worden op een Grid eens die gedimensioneerd is. Een groot deel van de resultaten werd bekomen door simulatie, waarbij gebruik gemaakt wordt van een eigen Grid simulatiepakket dat precies focust op netwerk- en Gridelementen. Het ontwerp van deze simulator, en de daarbijhorende implementatiekeuzes worden dan ook uitvoerig toegelicht in dit werk

"Virtual malleability" applied to MPI jobs to improve their execution in a multiprogrammed environment"

This work focuses on scheduling of MPI jobs when executing in shared-memory multiprocessors (SMPs). The objective was to obtain the best performance in response time in multiprogrammed multiprocessors systems using batch systems, assuming all the jobs have the same priority. To achieve that purpose, the benefits of supporting malleability on MPI jobs to reduce fragmentation and consequently improve the performance of the system were studied. The contributions made in this work can be summarized as follows:· Virtual malleability: A mechanism where a job is assigned a dynamic processor partition, where the number of processes is greater than the number of processors. The partition size is modified at runtime, according to external requirements such as the load of the system, by varying the multiprogramming level, making the job contend for resources with itself. In addition to this, a mechanism which decides at runtime if applying local or global process queues to an application depending on the load balancing between processes of it. · A job scheduling policy, that takes decisions such as how many processes to start with and the maximum multiprogramming degree based on the type and number of applications running and queued. Moreover, as soon as a job finishes execution and where there are queued jobs, this algorithm analyzes whether it is better to start execution of another job immediately or just wait until there are more resources available. · A new alternative to backfilling strategies for the problema of window execution time expiring. Virtual malleability is applied to the backfilled job, reducing its partition size but without aborting or suspending it as in traditional backfilling. The evaluation of this thesis has been done using a practical approach. All the proposals were implemented, modifying the three scheduling levels: queuing system, processor scheduler and runtime library. The impact of the contributions were studied under several types of workloads, varying machine utilization, communication and, balance degree of the applications, multiprogramming level, and job size. Results showed that it is possible to offer malleability over MPI jobs. An application obtained better performance when contending for the resources with itself than with other applications, especially in workloads with high machine utilization. Load imbalance was taken into account obtaining better performance if applying the right queue type to each application independently.The job scheduling policy proposed exploited virtual malleability by choosing at the beginning of execution some parameters like the number of processes and maximum multiprogramming level. It performed well under bursty workloads with low to medium machine utilizations. However as the load increases, virtual malleability was not enough. That is because, when the machine is heavily loaded, the jobs, once shrunk are not able to expand, so they must be executed all the time with a partition smaller than the job size, thus degrading performance. Thus, at this point the job scheduling policy concentrated just in moldability.Fragmentation was alleviated also by applying backfilling techniques to the job scheduling algorithm. Virtual malleability showed to be an interesting improvement in the window expiring problem. Backfilled jobs even on a smaller partition, can continue execution reducing memory swapping generated by aborts/suspensions In this way the queueing system is prevented from reinserting the backfilled job in the queue and re-executing it in the future.Postprint (published version

"Virtual malleability" applied to MPI jobs to improve their execution in a multiprogrammed environment"

This work focuses on scheduling of MPI jobs when executing in shared-memory multiprocessors (SMPs). The objective was to obtain the best performance in response time in multiprogrammed multiprocessors systems using batch systems, assuming all the jobs have the same priority. To achieve that purpose, the benefits of supporting malleability on MPI jobs to reduce fragmentation and consequently improve the performance of the system were studied. The contributions made in this work can be summarized as follows:· Virtual malleability: A mechanism where a job is assigned a dynamic processor partition, where the number of processes is greater than the number of processors. The partition size is modified at runtime, according to external requirements such as the load of the system, by varying the multiprogramming level, making the job contend for resources with itself. In addition to this, a mechanism which decides at runtime if applying local or global process queues to an application depending on the load balancing between processes of it. · A job scheduling policy, that takes decisions such as how many processes to start with and the maximum multiprogramming degree based on the type and number of applications running and queued. Moreover, as soon as a job finishes execution and where there are queued jobs, this algorithm analyzes whether it is better to start execution of another job immediately or just wait until there are more resources available. · A new alternative to backfilling strategies for the problema of window execution time expiring. Virtual malleability is applied to the backfilled job, reducing its partition size but without aborting or suspending it as in traditional backfilling. The evaluation of this thesis has been done using a practical approach. All the proposals were implemented, modifying the three scheduling levels: queuing system, processor scheduler and runtime library. The impact of the contributions were studied under several types of workloads, varying machine utilization, communication and, balance degree of the applications, multiprogramming level, and job size. Results showed that it is possible to offer malleability over MPI jobs. An application obtained better performance when contending for the resources with itself than with other applications, especially in workloads with high machine utilization. Load imbalance was taken into account obtaining better performance if applying the right queue type to each application independently.The job scheduling policy proposed exploited virtual malleability by choosing at the beginning of execution some parameters like the number of processes and maximum multiprogramming level. It performed well under bursty workloads with low to medium machine utilizations. However as the load increases, virtual malleability was not enough. That is because, when the machine is heavily loaded, the jobs, once shrunk are not able to expand, so they must be executed all the time with a partition smaller than the job size, thus degrading performance. Thus, at this point the job scheduling policy concentrated just in moldability.Fragmentation was alleviated also by applying backfilling techniques to the job scheduling algorithm. Virtual malleability showed to be an interesting improvement in the window expiring problem. Backfilled jobs even on a smaller partition, can continue execution reducing memory swapping generated by aborts/suspensions In this way the queueing system is prevented from reinserting the backfilled job in the queue and re-executing it in the future

Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space 1994

The Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space (i-SAIRAS 94), held October 18-20, 1994, in Pasadena, California, was jointly sponsored by NASA, ESA, and Japan's National Space Development Agency, and was hosted by the Jet Propulsion Laboratory (JPL) of the California Institute of Technology. i-SAIRAS 94 featured presentations covering a variety of technical and programmatic topics, ranging from underlying basic technology to specific applications of artificial intelligence and robotics to space missions. i-SAIRAS 94 featured a special workshop on planning and scheduling and provided scientists, engineers, and managers with the opportunity to exchange theoretical ideas, practical results, and program plans in such areas as space mission control, space vehicle processing, data analysis, autonomous spacecraft, space robots and rovers, satellite servicing, and intelligent instruments

Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS 1994), volume 1

The AIAA/NASA Conference on Intelligent Robotics in Field, Factory, Service, and Space (CIRFFSS '94) was originally proposed because of the strong belief that America's problems of global economic competitiveness and job creation and preservation can partly be solved by the use of intelligent robotics, which are also required for human space exploration missions. Individual sessions addressed nuclear industry, agile manufacturing, security/building monitoring, on-orbit applications, vision and sensing technologies, situated control and low-level control, robotic systems architecture, environmental restoration and waste management, robotic remanufacturing, and healthcare applications

Third International Symposium on Space Mission Operations and Ground Data Systems, part 1

Under the theme of 'Opportunities in Ground Data Systems for High Efficiency Operations of Space Missions,' the SpaceOps '94 symposium included presentations of more than 150 technical papers spanning five topic areas: Mission Management, Operations, Data Management, System Development, and Systems Engineering. The papers focus on improvements in the efficiency, effectiveness, productivity, and quality of data acquisition, ground systems, and mission operations. New technology, techniques, methods, and human systems are discussed. Accomplishments are also reported in the application of information systems to improve data retrieval, reporting, and archiving; the management of human factors; the use of telescience and teleoperations; and the design and implementation of logistics support for mission operations

First Annual Workshop on Space Operations Automation and Robotics (SOAR 87)

Several topics relative to automation and robotics technology are discussed. Automation of checkout, ground support, and logistics; automated software development; man-machine interfaces; neural networks; systems engineering and distributed/parallel processing architectures; and artificial intelligence/expert systems are among the topics covered