A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

Raptor Codes in the Low SNR Regime

In this paper, we revisit the design of Raptor codes for binary input additive white Gaussian noise (BIAWGN) channels, where we are interested in very low signal to noise ratios (SNRs). A linear programming degree distribution optimization problem is defined for Raptor codes in the low SNR regime through several approximations. We also provide an exact expression for the polynomial representation of the degree distribution with infinite maximum degree in the low SNR regime, which enables us to calculate the exact value of the fractions of output nodes of small degrees. A more practical degree distribution design is also proposed for Raptor codes in the low SNR regime, where we include the rate efficiency and the decoding complexity in the optimization problem, and an upper bound on the maximum rate efficiency is derived for given design parameters. Simulation results show that the Raptor code with the designed degree distributions can approach rate efficiencies larger than 0.95 in the low SNR regime.Comment: Submitted to the IEEE Transactions on Communications. arXiv admin note: text overlap with arXiv:1510.0772

Error and Congestion Resilient Video Streaming over Broadband Wireless

In this paper, error resilience is achieved by adaptive, application-layer rateless channel coding, which is used to protect H.264/Advanced Video Coding (AVC) codec data-partitioned videos. A packetization strategy is an effective tool to control error rates and, in the paper, source-coded data partitioning serves to allocate smaller packets to more important compressed video data. The scheme for doing this is applied to real-time streaming across a broadband wireless link. The advantages of rateless code rate adaptivity are then demonstrated in the paper. Because the data partitions of a video slice are each assigned to different network packets, in congestion-prone wireless networks the increased number of packets per slice and their size disparity may increase the packet loss rate from buffer overflows. As a form of congestion resilience, this paper recommends packet-size dependent scheduling as a relatively simple way of alleviating the buffer-overflow problem arising from data-partitioned packets. The paper also contributes an analysis of data partitioning and packet sizes as a prelude to considering scheduling regimes. The combination of adaptive channel coding and prioritized packetization for error resilience with packet-size dependent packet scheduling results in a robust streaming scheme specialized for broadband wireless and real-time streaming applications such as video conferencing, video telephony, and telemedicine

Performance analysis of sphere packed aided differential space-time spreading with iterative source-channel detection

The introduction of 5G with excessively high speeds and ever-advancing cellular device capabilities has increased the demand for high data rate wireless multimedia communication. Data compression, transmission robustness and error resilience are introduced to meet the increased demands of high data rates of today. An innovative approach is to come up with a unique setup of source bit codes (SBCs) that ensure the convergence and joint source-channel coding (JSCC) correspondingly results in lower bit error ratio (BER). The soft-bit assisted source and channel codes are optimized jointly for optimum convergence. Source bit codes assisted by iterative detection are used with a rate-1 precoder for performance evaluation of the above mentioned scheme of transmitting sata-partitioned (DP) H.264/AVC frames from source through a narrowband correlated Rayleigh fading channel. A novel approach of using sphere packing (SP) modulation aided differential space time spreading (DSTS) in combination with SBC is designed for the video transmission to cope with channel fading. Furthermore, the effects of SBC with different hamming distances d(H,min) but similar coding rates is explored on objective video quality such as peak signal to noise ratio (PSNR) and also the overall bit error ratio (BER). EXtrinsic Information Transfer Charts (EXIT) are used for analysis of the convergence behavior of SBC and its iterative scheme. Specifically, the experiments exhibit that the proposed scheme of error protection of SBC d(H,min) = 6 outperforms the SBCs having same code rate, but with d(H,min) = 3 by 3 dB with PSNR degradation of 1 dB. Furthermore, simulation results show that a gain of 27 dB Eb/N0 is achieved with SBC having code rate 1/3 compared to the benchmark Rate-1 SBC codes.Web of Science2116art. no. 546

Solutions for New Terrestrial Broadcasting Systems Offering Simultaneously Stationary and Mobile Services

221 p.[EN]Since the first broadcasted TV signal was transmitted in the early decades of the past century, the television broadcasting industry has experienced a series of dramatic changes. Most recently, following the evolution from analogue to digital systems, the digital dividend has become one of the main concerns of the broadcasting industry. In fact, there are many international spectrum authorities reclaiming part of the broadcasting spectrum to satisfy the growing demand of other services, such as broadband wireless services, arguing that the TV services are not very spectrum-efficient. Apart from that, it must be taken into account that, even if up to now the mobile broadcasting has not been considered a major requirement, this will probably change in the near future. In fact, it is expected that the global mobile data traffic will increase 11-fold between 2014 and 2018, and what is more, over two thirds of the data traffic will be video stream by the end of that period. Therefore, the capability to receive HD services anywhere with a mobile device is going to be a mandatory requirement for any new generation broadcasting system. The main objective of this work is to present several technical solutions that answer to these challenges. In particular, the main questions to be solved are the spectrum efficiency issue and the increasing user expectations of receiving high quality mobile services. In other words, the main objective is to provide technical solutions for an efficient and flexible usage of the terrestrial broadcasting spectrum for both stationary and mobile services. The first contributions of this scientific work are closely related to the study of the mobile broadcast reception. Firstly, a comprehensive mathematical analysis of the OFDM signal behaviour over time-varying channels is presented. In order to maximize the channel capacity in mobile environments, channel estimation and equalization are studied in depth. First, the most implemented equalization solutions in time-varying scenarios are analyzed, and then, based on these existing techniques, a new equalization algorithm is proposed for enhancing the receivers’ performance. An alternative solution for improving the efficiency under mobile channel conditions is treating the Inter Carrier Interference as another noise source. Specifically, after analyzing the ICI impact and the existing solutions for reducing the ICI penalty, a new approach based on the robustness of FEC codes is presented. This new approach employs one dimensional algorithms at the receiver and entrusts the ICI removing task to the robust forward error correction codes. Finally, another major contribution of this work is the presentation of the Layer Division Multiplexing (LDM) as a spectrum-efficient and flexible solution for offering stationary and mobile services simultaneously. The comprehensive theoretical study developed here verifies the improved spectrum efficiency, whereas the included practical validation confirms the feasibility of the system and presents it as a very promising multiplexing technique, which will surely be a strong candidate for the next generation broadcasting services.[ES]Desde el comienzo de la transmisión de las primeras señales de televisión a principios del siglo pasado, la radiodifusión digital ha evolucionado gracias a una serie de cambios relevantes. Recientemente, como consecuencia directa de la digitalización del servicio, el dividendo digital se ha convertido en uno de los caballos de batalla de la industria de la radiodifusión. De hecho, no son pocos los consorcios internacionales que abogan por asignar parte del espectro de radiodifusión a otros servicios como, por ejemplo, la telefonía móvil, argumentado la poca eficiencia espectral de la tecnología de radiodifusión actual. Asimismo, se debe tener en cuenta que a pesar de que los servicios móviles no se han considerado fundamentales en el pasado, esta tendencia probablemente variará en el futuro cercano. De hecho, se espera que el tráfico derivado de servicios móviles se multiplique por once entre los años 2014 y 2018; y lo que es más importante, se pronostica que dos tercios del tráfico móvil sea video streaming para finales de ese periodo. Por lo tanto, la posibilidad de ofrecer servicios de alta definición en dispositivos móviles es un requisito fundamental para los sistemas de radiodifusión de nueva generación. El principal objetivo de este trabajo es presentar soluciones técnicas que den respuesta a los retos planteados anteriormente. En particular, las principales cuestiones a resolver son la ineficiencia espectral y el incremento de usuarios que demandan mayor calidad en los contenidos para dispositivos móviles. En pocas palabras, el principal objetivo de este trabajo se basa en ofrecer una solución más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. La primera contribución relevante de este trabajo está relacionada con la recepción de la señal de televisión en movimiento. En primer lugar, se presenta un completo análisis matemático del comportamiento de la señal OFDM en canales variantes con el tiempo. A continuación, con la intención de maximizar la capacidad del canal, se estudian en profundidad los algoritmos de estimación y ecualización. Posteriormente, se analizan los algoritmos de ecualización más implementados, y por último, basándose en estas técnicas, se propone un nuevo algoritmo de ecualización para aumentar el rendimiento de los receptores en tales condiciones. Del mismo modo, se plantea un nuevo enfoque para mejorar la eficiencia de los servicios móviles basado en tratar la interferencia entre portadoras como una fuente de ruido. Concretamente, tras analizar el impacto del ICI en los receptores actuales, se sugiere delegar el trabajo de corrección de dichas distorsiones en códigos FEC muy robustos. Finalmente, la última contribución importante de este trabajo es la presentación de la tecnología LDM como una manera más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. El análisis teórico presentado confirma el incremento en la eficiencia espectral, mientras que el estudio práctico valida la posible implementación del sistema y presenta la tecnología LDM c

Finite Length Analysis of Rateless Codes and Their Application in Wireless Networks

Mobile communication systems are undergoing revolutionary developments as a result of the rapidly growing demands for high data rates and reliable communication connections. The key features of the next-generation mobile communication systems are provision of high-speed and robust communication links. However, wireless communications still need to address the same challenge–unreliable communication connections, arising from a number of causes including noise, interference, and distortion because of hardware imperfections or physical limitations. Forwarding error correction (FEC) codes are used to protect source information by adding redundancy. With FEC codes, errors among the transmitted message can be corrected by the receiver. Recent work has shown that, by applying rateless codes (a class of FEC codes), wireless transmission efficiency and reliability can be dramatically improved. Unlike traditional codes, rateless codes can adapt to different channel conditions. Rateless codes have been widely used in many multimedia broadcast/multicast applications. Among the known rate- less codes, two types of codes stand out: Luby transform (LT) codes and Raptor codes. However, our understanding of LT codes and Raptor codes is still in- complete due to the lack of complete theoretical analysis on the decoding error performance of these codes. Particularly, this thesis focuses on the decoding error performance of these codes under maximum-likelihood (ML) decoding, which provides a benchmark on the optimum system performance for gauging other decoding schemes. In this thesis, we discuss the effectiveness of rateless codes in terms of the success probability of decoding. It is defined as the probability that all source symbols can be successfully decoded with a given number of success- fully received coded symbols under ML decoding. This thesis provides a detailed mathematical analysis on the rank profile of general LT codes to evaluate the decoding success probability of LT codes under ML decoding. Furthermore, by analyzing the rank of the product of two random coefficient matrices, this thesis derived bounds on the decoding success probability of Raptor codes with a systematic low-density generator matrix (LDGM) code as the pre-code under ML decoding. Additionally, by resorting to stochastic geometry analysis, we develop a rateless codes based broadcast scheme. This scheme allows a base station (BS) to broadcast a given number of symbols to a large number of users, without user acknowledgment, while being able to pro- vide a performance guarantee on the probability of successful delivery. Further, the BS has limited statistical information about the environment including the spatial distribution of users (instead of their exact locations and number) and the wireless propagation model. Based on the analysis of finite length LT codes and Raptor codes, an upper and a lower bound on the number of transmissions required to meet the performance requirement are obtained. The technique and analysis developed in this thesis are useful for designing efficient and reliable wireless broadcast strategies. It is of interest to implement rateless codes into modern communication systems

Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology

L'abstract è presente nell'allegato / the abstract is in the attachmen