2,180 research outputs found
The Bus Goes Wireless: Routing-Free Data Collection with QoS Guarantees in Sensor Networks
Abstract—We present the low-power wireless bus (LWB), a new communication paradigm for QoS-aware data collection in lowpower sensor networks. The LWB maps all communication onto network floods by using Glossy, an efficient flooding architecture for wireless sensor networks. Therefore, unlike current solutions, the LWB requires no information of the network topology, and inherently supports networks with mobile nodes and multiple data sinks. A LWB prototype implemented in Contiki guarantees bounded end-to-end communication delay and duplicate-free, inorder packet delivery—key QoS requirements in many control and mission-critical applications. Experiments on two testbeds demonstrate that the LWB prototype outperforms state-of-theart data collection and link layer protocols, in terms of reliability and energy efficiency. For instance, we measure an average radio duty cycle of 1.69 % and an overall data yield of 99.97 % in a typical data collection scenario with 85 sensor nodes on Twist. I
A Case for Time Slotted Channel Hopping for ICN in the IoT
Recent proposals to simplify the operation of the IoT include the use of
Information Centric Networking (ICN) paradigms. While this is promising,
several challenges remain. In this paper, our core contributions (a) leverage
ICN communication patterns to dynamically optimize the use of TSCH (Time
Slotted Channel Hopping), a wireless link layer technology increasingly popular
in the IoT, and (b) make IoT-style routing adaptive to names, resources, and
traffic patterns throughout the network--both without cross-layering. Through a
series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware,
we find that our approach is fully robust against wireless interference, and
almost halves the energy consumed for transmission when compared to CSMA. Most
importantly, our adaptive scheduling prevents the time-slotted MAC layer from
sacrificing throughput and delay
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Recommended from our members
Application-aware scheduling for VoIP in Wireless Mesh Networks
Wireless Mesh Networks (WMNs) are seen as a means to provide last mile connections in Next Generation Networks (NGNs). Because of their auto configuration capabilities and the low deployment cost WMNs are considered to be an efficient solution for the support of multiple voice, video and data services in NGNs. This paper looks at the optimal provision of resources in WMNs for Voice over IP (VoIP) traffic, which has strict performance requirements in terms of delay, jitter and packet loss. In WMNs, because of the challenges introduced by wireless multi hop transmissions and limited resources, providing performance quality for VoIP comparable to the voice quality in the traditional circuit switched networks is a major challenge.
This paper analyses different scheduling mechanisms for TDMA based access control in mesh networks as specified in the IEEE 802.16 2004 WiMAX standard. The performance of the VoIP applications when different scheduling mechanisms are deployed is analysed on a variety of topologies using ns 2 simulation and mathematical analysis. The paper concludes that on demand scheduling of VoIP traffic typically deployed in 802.11 based WMNs is not able to provide the required VoIP quality in realistic mesh WiMAX network scenarios and is therefore not optimal from a network operator’s point of view. Instead, it is shown, that continuous scheduling is much better suited to serve VoIP traffic. The paper then proposes a new VoIP aware resource coordination scheme and shows, through simulation, that the new scheme is scalable and provides good quality for VoIP service in a wide range of network scenarios. The results shown in the paper prove that the new scheme is resilient to increasing hop count, increasing number of simultaneous VoIP sessions and the background traffic load in the network. Compared to other resource coordination schemes the VoIP aware scheduler significantly increases the number of supported calls
- …