HI Lightcones for LADUMA using Gadget-3 : performance profiling and application of an HPC code

Includes bibliographical references.This project concerns the investigation, performance profiling and optimisation of the high performance cosmological code, GADGET-3. This code was used to develop a synthetic field-of-view, or lightcone, for the MeerKAT telescope to replicate what it will observe when it conducts the LADUMA ultra-deep HI survey. This lightcone will assist in the planning process of the survey. The deliverables for this project are summarised as follows: * Provide an up-to-date performance evaluation and optimisation report for the cosmological simulation code GADGET-3. * Use GADGET-3 to produce an sufficiently high resolution simulation of a region of the Universe. • Develop a Python code to produce a lightcone which represents the MeerKAT telescope's field-of-view, by post-processing simulation output snapshots. * Extract relevant metadata from the simulation snapshots to provide additional insight into the simulated observation. * Produce an efficiently written and well documented software package to enable other researchers to produce synthetic lightcones

Programming models to support data science workflows

Data Science workflows have become a must to progress in many scientific areas such as life, health, and earth sciences. In contrast to traditional HPC workflows, they are more heterogeneous; combining binary executions, MPI simulations, multi-threaded applications, custom analysis (possibly written in Java, Python, C/C++ or R), and real-time processing. Furthermore, in the past, field experts were capable of programming and running small simulations. However, nowadays, simulations requiring hundreds or thousands of cores are widely used and, to this point, efficiently programming them becomes a challenge even for computer sciences. Thus, programming languages and models make a considerable effort to ease the programmability while maintaining acceptable performance. This thesis contributes to the adaptation of High-Performance frameworks to support the needs and challenges of Data Science workflows by extending COMPSs, a mature, general-purpose, task-based, distributed programming model. First, we enhance our prototype to orchestrate different frameworks inside a single programming model so that non-expert users can build complex workflows where some steps require highly optimised state of the art frameworks. This extension includes the @binary, @OmpSs, @MPI, @COMPSs, and @MultiNode annotations for both Java and Python workflows. Second, we integrate container technologies to enable developers to easily port, distribute, and scale their applications to distributed computing platforms. This combination provides a straightforward methodology to parallelise applications from sequential codes along with efficient image management and application deployment that ease the packaging and distribution of applications. We distinguish between static, HPC, and dynamic container management and provide representative use cases for each scenario using Docker, Singularity, and Mesos. Third, we design, implement and integrate AutoParallel, a Python module to automatically find an appropriate task-based parallelisation of affine loop nests and execute them in parallel in a distributed computing infrastructure. It is based on sequential programming and requires one single annotation (the @parallel Python decorator) so that anyone with intermediate-level programming skills can scale up an application to hundreds of cores. Finally, we propose a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows) using one single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements without the effort of combining several frameworks at the same time. Also, to illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library that can be easily integrated with existing task-based frameworks to provide support for dataflows. The library provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end.Els fluxos de treball de Data Science s’han convertit en una necessitat per progressar en moltes àrees científiques com les ciències de la vida, la salut i la terra. A diferència dels fluxos de treball tradicionals per a la CAP, els fluxos de Data Science són més heterogenis; combinant l’execució de binaris, simulacions MPI, aplicacions multiprocés, anàlisi personalitzats (possiblement escrits en Java, Python, C / C ++ o R) i computacions en temps real. Mentre que en el passat els experts de cada camp eren capaços de programar i executar petites simulacions, avui dia, aquestes simulacions representen un repte fins i tot per als experts ja que requereixen centenars o milers de nuclis. Per aquesta raó, els llenguatges i models de programació actuals s’esforcen considerablement en incrementar la programabilitat mantenint un rendiment acceptable. Aquesta tesi contribueix a l’adaptació de models de programació per a la CAP per afrontar les necessitats i reptes dels fluxos de Data Science estenent COMPSs, un model de programació distribuïda madur, de propòsit general, i basat en tasques. En primer lloc, millorem el nostre prototip per orquestrar diferent programari per a que els usuaris no experts puguin crear fluxos complexos usant un únic model on alguns passos requereixin tecnologies altament optimitzades. Aquesta extensió inclou les anotacions de @binary, @OmpSs, @MPI, @COMPSs, i @MultiNode per a fluxos en Java i Python. En segon lloc, integrem tecnologies de contenidors per permetre als desenvolupadors portar, distribuir i escalar fàcilment les seves aplicacions en plataformes distribuïdes. A més d’una metodologia senzilla per a paral·lelitzar aplicacions a partir de codis seqüencials, aquesta combinació proporciona una gestió d’imatges i una implementació d’aplicacions eficients que faciliten l’empaquetat i la distribució d’aplicacions. Distingim entre la gestió de contenidors estàtica, CAP i dinàmica i proporcionem casos d’ús representatius per a cada escenari amb Docker, Singularity i Mesos. En tercer lloc, dissenyem, implementem i integrem AutoParallel, un mòdul de Python per determinar automàticament la paral·lelització basada en tasques de nius de bucles afins i executar-los en paral·lel en una infraestructura distribuïda. AutoParallel està basat en programació seqüencial, requereix una sola anotació (el decorador @parallel) i permet a un usuari intermig escalar una aplicació a centenars de nuclis. Finalment, proposem una forma d’estendre els sistemes basats en tasques per admetre dades d’entrada i sortida continus; permetent així la combinació de fluxos de treball i dades (Fluxos Híbrids) en un únic model. Conseqüentment, els desenvolupadors poden crear fluxos complexos seguint diferents patrons sense l’esforç de combinar diversos models al mateix temps. A més, per a il·lustrar les capacitats dels Fluxos Híbrids, hem creat una biblioteca (DistroStreamLib) que s’integra fàcilment amb els models basats en tasques per suportar fluxos de dades. La biblioteca proporciona una representació homogènia, genèrica i simple de seqüències contínues d’objectes i arxius en Java i Python; permetent gestionar qualsevol tipus de dades sense tractar directament amb el back-end de streaming.Los flujos de trabajo de Data Science se han convertido en una necesidad para progresar en muchas áreas científicas como las ciencias de la vida, la salud y la tierra. A diferencia de los flujos de trabajo tradicionales para la CAP, los flujos de Data Science son más heterogéneos; combinando la ejecución de binarios, simulaciones MPI, aplicaciones multiproceso, análisis personalizados (posiblemente escritos en Java, Python, C/C++ o R) y computaciones en tiempo real. Mientras que en el pasado los expertos de cada campo eran capaces de programar y ejecutar pequeñas simulaciones, hoy en día, estas simulaciones representan un desafío incluso para los expertos ya que requieren cientos o miles de núcleos. Por esta razón, los lenguajes y modelos de programación actuales se esfuerzan considerablemente en incrementar la programabilidad manteniendo un rendimiento aceptable. Esta tesis contribuye a la adaptación de modelos de programación para la CAP para afrontar las necesidades y desafíos de los flujos de Data Science extendiendo COMPSs, un modelo de programación distribuida maduro, de propósito general, y basado en tareas. En primer lugar, mejoramos nuestro prototipo para orquestar diferentes software para que los usuarios no expertos puedan crear flujos complejos usando un único modelo donde algunos pasos requieran tecnologías altamente optimizadas. Esta extensión incluye las anotaciones de @binary, @OmpSs, @MPI, @COMPSs, y @MultiNode para flujos en Java y Python. En segundo lugar, integramos tecnologías de contenedores para permitir a los desarrolladores portar, distribuir y escalar fácilmente sus aplicaciones en plataformas distribuidas. Además de una metodología sencilla para paralelizar aplicaciones a partir de códigos secuenciales, esta combinación proporciona una gestión de imágenes y una implementación de aplicaciones eficientes que facilitan el empaquetado y la distribución de aplicaciones. Distinguimos entre gestión de contenedores estática, CAP y dinámica y proporcionamos casos de uso representativos para cada escenario con Docker, Singularity y Mesos. En tercer lugar, diseñamos, implementamos e integramos AutoParallel, un módulo de Python para determinar automáticamente la paralelización basada en tareas de nidos de bucles afines y ejecutarlos en paralelo en una infraestructura distribuida. AutoParallel está basado en programación secuencial, requiere una sola anotación (el decorador @parallel) y permite a un usuario intermedio escalar una aplicación a cientos de núcleos. Finalmente, proponemos una forma de extender los sistemas basados en tareas para admitir datos de entrada y salida continuos; permitiendo así la combinación de flujos de trabajo y datos (Flujos Híbridos) en un único modelo. Consecuentemente, los desarrolladores pueden crear flujos complejos siguiendo diferentes patrones sin el esfuerzo de combinar varios modelos al mismo tiempo. Además, para ilustrar las capacidades de los Flujos Híbridos, hemos creado una biblioteca (DistroStreamLib) que se integra fácilmente a los modelos basados en tareas para soportar flujos de datos. La biblioteca proporciona una representación homogénea, genérica y simple de secuencias continuas de objetos y archivos en Java y Python; permitiendo manejar cualquier tipo de datos sin tratar directamente con el back-end de streaming

Programming models to support data science workflows

Data Science workflows have become a must to progress in many scientific areas such as life, health, and earth sciences. In contrast to traditional HPC workflows, they are more heterogeneous; combining binary executions, MPI simulations, multi-threaded applications, custom analysis (possibly written in Java, Python, C/C++ or R), and real-time processing. Furthermore, in the past, field experts were capable of programming and running small simulations. However, nowadays, simulations requiring hundreds or thousands of cores are widely used and, to this point, efficiently programming them becomes a challenge even for computer sciences. Thus, programming languages and models make a considerable effort to ease the programmability while maintaining acceptable performance. This thesis contributes to the adaptation of High-Performance frameworks to support the needs and challenges of Data Science workflows by extending COMPSs, a mature, general-purpose, task-based, distributed programming model. First, we enhance our prototype to orchestrate different frameworks inside a single programming model so that non-expert users can build complex workflows where some steps require highly optimised state of the art frameworks. This extension includes the @binary, @OmpSs, @MPI, @COMPSs, and @MultiNode annotations for both Java and Python workflows. Second, we integrate container technologies to enable developers to easily port, distribute, and scale their applications to distributed computing platforms. This combination provides a straightforward methodology to parallelise applications from sequential codes along with efficient image management and application deployment that ease the packaging and distribution of applications. We distinguish between static, HPC, and dynamic container management and provide representative use cases for each scenario using Docker, Singularity, and Mesos. Third, we design, implement and integrate AutoParallel, a Python module to automatically find an appropriate task-based parallelisation of affine loop nests and execute them in parallel in a distributed computing infrastructure. It is based on sequential programming and requires one single annotation (the @parallel Python decorator) so that anyone with intermediate-level programming skills can scale up an application to hundreds of cores. Finally, we propose a way to extend task-based management systems to support continuous input and output data to enable the combination of task-based workflows and dataflows (Hybrid Workflows) using one single programming model. Hence, developers can build complex Data Science workflows with different approaches depending on the requirements without the effort of combining several frameworks at the same time. Also, to illustrate the capabilities of Hybrid Workflows, we have built a Distributed Stream Library that can be easily integrated with existing task-based frameworks to provide support for dataflows. The library provides a homogeneous, generic, and simple representation of object and file streams in both Java and Python; enabling complex workflows to handle any data type without dealing directly with the streaming back-end.Els fluxos de treball de Data Science s’han convertit en una necessitat per progressar en moltes àrees científiques com les ciències de la vida, la salut i la terra. A diferència dels fluxos de treball tradicionals per a la CAP, els fluxos de Data Science són més heterogenis; combinant l’execució de binaris, simulacions MPI, aplicacions multiprocés, anàlisi personalitzats (possiblement escrits en Java, Python, C / C ++ o R) i computacions en temps real. Mentre que en el passat els experts de cada camp eren capaços de programar i executar petites simulacions, avui dia, aquestes simulacions representen un repte fins i tot per als experts ja que requereixen centenars o milers de nuclis. Per aquesta raó, els llenguatges i models de programació actuals s’esforcen considerablement en incrementar la programabilitat mantenint un rendiment acceptable. Aquesta tesi contribueix a l’adaptació de models de programació per a la CAP per afrontar les necessitats i reptes dels fluxos de Data Science estenent COMPSs, un model de programació distribuïda madur, de propòsit general, i basat en tasques. En primer lloc, millorem el nostre prototip per orquestrar diferent programari per a que els usuaris no experts puguin crear fluxos complexos usant un únic model on alguns passos requereixin tecnologies altament optimitzades. Aquesta extensió inclou les anotacions de @binary, @OmpSs, @MPI, @COMPSs, i @MultiNode per a fluxos en Java i Python. En segon lloc, integrem tecnologies de contenidors per permetre als desenvolupadors portar, distribuir i escalar fàcilment les seves aplicacions en plataformes distribuïdes. A més d’una metodologia senzilla per a paral·lelitzar aplicacions a partir de codis seqüencials, aquesta combinació proporciona una gestió d’imatges i una implementació d’aplicacions eficients que faciliten l’empaquetat i la distribució d’aplicacions. Distingim entre la gestió de contenidors estàtica, CAP i dinàmica i proporcionem casos d’ús representatius per a cada escenari amb Docker, Singularity i Mesos. En tercer lloc, dissenyem, implementem i integrem AutoParallel, un mòdul de Python per determinar automàticament la paral·lelització basada en tasques de nius de bucles afins i executar-los en paral·lel en una infraestructura distribuïda. AutoParallel està basat en programació seqüencial, requereix una sola anotació (el decorador @parallel) i permet a un usuari intermig escalar una aplicació a centenars de nuclis. Finalment, proposem una forma d’estendre els sistemes basats en tasques per admetre dades d’entrada i sortida continus; permetent així la combinació de fluxos de treball i dades (Fluxos Híbrids) en un únic model. Conseqüentment, els desenvolupadors poden crear fluxos complexos seguint diferents patrons sense l’esforç de combinar diversos models al mateix temps. A més, per a il·lustrar les capacitats dels Fluxos Híbrids, hem creat una biblioteca (DistroStreamLib) que s’integra fàcilment amb els models basats en tasques per suportar fluxos de dades. La biblioteca proporciona una representació homogènia, genèrica i simple de seqüències contínues d’objectes i arxius en Java i Python; permetent gestionar qualsevol tipus de dades sense tractar directament amb el back-end de streaming.Los flujos de trabajo de Data Science se han convertido en una necesidad para progresar en muchas áreas científicas como las ciencias de la vida, la salud y la tierra. A diferencia de los flujos de trabajo tradicionales para la CAP, los flujos de Data Science son más heterogéneos; combinando la ejecución de binarios, simulaciones MPI, aplicaciones multiproceso, análisis personalizados (posiblemente escritos en Java, Python, C/C++ o R) y computaciones en tiempo real. Mientras que en el pasado los expertos de cada campo eran capaces de programar y ejecutar pequeñas simulaciones, hoy en día, estas simulaciones representan un desafío incluso para los expertos ya que requieren cientos o miles de núcleos. Por esta razón, los lenguajes y modelos de programación actuales se esfuerzan considerablemente en incrementar la programabilidad manteniendo un rendimiento aceptable. Esta tesis contribuye a la adaptación de modelos de programación para la CAP para afrontar las necesidades y desafíos de los flujos de Data Science extendiendo COMPSs, un modelo de programación distribuida maduro, de propósito general, y basado en tareas. En primer lugar, mejoramos nuestro prototipo para orquestar diferentes software para que los usuarios no expertos puedan crear flujos complejos usando un único modelo donde algunos pasos requieran tecnologías altamente optimizadas. Esta extensión incluye las anotaciones de @binary, @OmpSs, @MPI, @COMPSs, y @MultiNode para flujos en Java y Python. En segundo lugar, integramos tecnologías de contenedores para permitir a los desarrolladores portar, distribuir y escalar fácilmente sus aplicaciones en plataformas distribuidas. Además de una metodología sencilla para paralelizar aplicaciones a partir de códigos secuenciales, esta combinación proporciona una gestión de imágenes y una implementación de aplicaciones eficientes que facilitan el empaquetado y la distribución de aplicaciones. Distinguimos entre gestión de contenedores estática, CAP y dinámica y proporcionamos casos de uso representativos para cada escenario con Docker, Singularity y Mesos. En tercer lugar, diseñamos, implementamos e integramos AutoParallel, un módulo de Python para determinar automáticamente la paralelización basada en tareas de nidos de bucles afines y ejecutarlos en paralelo en una infraestructura distribuida. AutoParallel está basado en programación secuencial, requiere una sola anotación (el decorador @parallel) y permite a un usuario intermedio escalar una aplicación a cientos de núcleos. Finalmente, proponemos una forma de extender los sistemas basados en tareas para admitir datos de entrada y salida continuos; permitiendo así la combinación de flujos de trabajo y datos (Flujos Híbridos) en un único modelo. Consecuentemente, los desarrolladores pueden crear flujos complejos siguiendo diferentes patrones sin el esfuerzo de combinar varios modelos al mismo tiempo. Además, para ilustrar las capacidades de los Flujos Híbridos, hemos creado una biblioteca (DistroStreamLib) que se integra fácilmente a los modelos basados en tareas para soportar flujos de datos. La biblioteca proporciona una representación homogénea, genérica y simple de secuencias continuas de objetos y archivos en Java y Python; permitiendo manejar cualquier tipo de datos sin tratar directamente con el back-end de streaming.Postprint (published version

A metadata-enhanced framework for high performance visual effects

This thesis is devoted to reducing the interactive latency of image processing computations in visual effects. Film and television graphic artists depend upon low-latency feedback to receive a visual response to changes in effect parameters. We tackle latency with a domain-specific optimising compiler which leverages high-level program metadata to guide key computational and memory hierarchy optimisations. This metadata encodes static and dynamic information about data dependence and patterns of memory access in the algorithms constituting a visual effect – features that are typically difficult to extract through program analysis – and presents it to the compiler in an explicit form. By using domain-specific information as a substitute for program analysis, our compiler is able to target a set of complex source-level optimisations that a vendor compiler does not attempt, before passing the optimised source to the vendor compiler for lower-level optimisation. Three key metadata-supported optimisations are presented. The first is an adaptation of space and schedule optimisation – based upon well-known compositions of the loop fusion and array contraction transformations – to the dynamic working sets and schedules of a runtimeparameterised visual effect. This adaptation sidesteps the costly solution of runtime code generation by specialising static parameters in an offline process and exploiting dynamic metadata to adapt the schedule and contracted working sets at runtime to user-tunable parameters. The second optimisation comprises a set of transformations to generate SIMD ISA-augmented source code. Our approach differs from autovectorisation by using static metadata to identify parallelism, in place of data dependence analysis, and runtime metadata to tune the data layout to user-tunable parameters for optimal aligned memory access. The third optimisation comprises a related set of transformations to generate code for SIMT architectures, such as GPUs. Static dependence metadata is exploited to guide large-scale parallelisation for tens of thousands of in-flight threads. Optimal use of the alignment-sensitive, explicitly managed memory hierarchy is achieved by identifying inter-thread and intra-core data sharing opportunities in memory access metadata. A detailed performance analysis of these optimisations is presented for two industrially developed visual effects. In our evaluation we demonstrate up to 8.1x speed-ups on Intel and AMD multicore CPUs and up to 6.6x speed-ups on NVIDIA GPUs over our best hand-written implementations of these two effects. Programmability is enhanced by automating the generation of SIMD and SIMT implementations from a single programmer-managed scalar representation

Architecture aware parallel programming in Glasgow parallel Haskell (GPH)

General purpose computing architectures are evolving quickly to become manycore and hierarchical: i.e. a core can communicate more quickly locally than globally. To be effective on such architectures, programming models must be aware of the communications hierarchy. This thesis investigates a programming model that aims to share the responsibility of task placement, load balance, thread creation, and synchronisation between the application developer and the runtime system. The main contribution of this thesis is the development of four new architectureaware constructs for Glasgow parallel Haskell that exploit information about task size and aim to reduce communication for small tasks, preserve data locality, or to distribute large units of work. We define a semantics for the constructs that specifies the sets of PEs that each construct identifies, and we check four properties of the semantics using QuickCheck. We report a preliminary investigation of architecture aware programming models that abstract over the new constructs. In particular, we propose architecture aware evaluation strategies and skeletons. We investigate three common paradigms, such as data parallelism, divide-and-conquer and nested parallelism, on hierarchical architectures with up to 224 cores. The results show that the architecture-aware programming model consistently delivers better speedup and scalability than existing constructs, together with a dramatic reduction in the execution time variability. We present a comparison of functional multicore technologies and it reports some of the first ever multicore results for the Feedback Directed Implicit Parallelism (FDIP) and the semi-explicit parallelism (GpH and Eden) languages. The comparison reflects the growing maturity of the field by systematically evaluating four parallel Haskell implementations on a common multicore architecture. The comparison contrasts the programming effort each language requires with the parallel performance delivered. We investigate the minimum thread granularity required to achieve satisfactory performance for three implementations parallel functional language on a multicore platform. The results show that GHC-GUM requires a larger thread granularity than Eden and GHC-SMP. The thread granularity rises as the number of cores rises

An FPGA implementation of an investigative many-core processor, Fynbos : in support of a Fortran autoparallelising software pipeline

Includes bibliographical references.In light of the power, memory, ILP, and utilisation walls facing the computing industry, this work examines the hypothetical many-core approach to finding greater compute performance and efficiency. In order to achieve greater efficiency in an environment in which Moore’s law continues but TDP has been capped, a means of deriving performance from dark and dim silicon is needed. The many-core hypothesis is one approach to exploiting these available transistors efficiently. As understood in this work, it involves trading in hardware control complexity for hundreds to thousands of parallel simple processing elements, and operating at a clock speed sufficiently low as to allow the efficiency gains of near threshold voltage operation. Performance is there- fore dependant on exploiting a new degree of fine-grained parallelism such as is currently only found in GPGPUs, but in a manner that is not as restrictive in application domain range. While removing the complex control hardware of traditional CPUs provides space for more arithmetic hardware, a basic level of control is still required. For a number of reasons this work chooses to replace this control largely with static scheduling. This pushes the burden of control primarily to the software and specifically the compiler, rather not to the programmer or to an application specific means of control simplification. An existing legacy tool chain capable of autoparallelising sequential Fortran code to the degree of parallelism necessary for many-core exists. This work implements a many-core architecture to match it. Prototyping the design on an FPGA, it is possible to examine the real world performance of the compiler-architecture system to a greater degree than simulation only would allow. Comparing theoretical peak performance and real performance in a case study application, the system is found to be more efficient than any other reviewed, but to also significantly under perform relative to current competing architectures. This failing is apportioned to taking the need for simple hardware too far, and an inability to implement static scheduling mitigating tactics due to lack of support for such in the compiler

An agent-based visualisation system.

This thesis explores the concepts of visual supercomputing, where complex distributed systems are used toward interactive visualisation of large datasets. Such complex systems inherently trigger management and optimisation problems; in recent years the concepts of autonomic computing have arisen to address those issues. Distributed visualisation systems are a very challenging area to apply autonomic computing ideas as such systems are both latency and compute sensitive, while most autonomic computing implementations usually concentrate on one or the other but not both concurrently. A major contribution of this thesis is to provide a case study demonstrating the application of autonomic computing concepts to a computation intensive, real-time distributed visualisation system. The first part of the thesis proposes the realisation of a layered multi-agent system to enable autonomic visualisation. The implementation of a generic multi-agent system providing reflective features is described. This architecture is then used to create a flexible distributed graphic pipeline, oriented toward real-time visualisation of volume datasets. Performance evaluation of the pipeline is presented. The second part of the thesis explores the reflective nature of the system and presents high level architectures based on software agents, or visualisation strategies, that take advantage of the flexibility of the system to provide generic features. Autonomic capabilities are presented, with fault recovery and automatic resource configuration. Performance evaluation, simulation and prediction of the system are presented, exploring different use cases and optimisation scenarios. A performance exploration tool, Delphe, is described, which uses real-time data of the system to let users explore its performance

Task-Based Parallelism for General Purpose Graphics Processing Units and Hybrid Shared-Distributed Memory Systems.

Modern computers can no longer rely on increasing CPU speed to improve their performance as further increasing the clock speed of single CPU machines will make them too difficult to cool, or the cooling require too much power. Hardware manufacturers must now use parallelism to drive performance to the levels expected by Moore's Law. More recently, High Performance Computers (HPCs) have adopted heterogeneous architectures, i.e.having multiple types of computing hardware (such as CPU & GPU) on a single node. These architectures allow the opportunity to extract performance from non-CPU architectures, while still providing a general purpose platform for less modern codes. In this thesis we investigate Task-Based Parallelism, a shared-memory paradigm for parallel computing. Task-Based Parallelism requires the programmer to divide the work into chunks (known as tasks) and describe the data dependencies between tasks. The tasks are then scheduled amongst the threads automatically by the task-based scheduler. In this thesis we examine how Task-Based Parallelism can be used with GPUs and hybrid shared-distributed memory, in particular we examine how data transfer can be incorporated into a task-based framework, either to the GPU from the host, or between separate nodes. We also examine how we can use the task graph to load balance the computation between multiple nodes or GPUs. We test our task-based methods with Molecular Dynamics, a tiled QR decomposition, and a new task-based Barnes-Hut algorithm. These are problems with different dependency structures which tests the ability of the scheduler to handle a variety of different types of computation. The results with these testcases show improved performance when we use asynchronous data transfer to and from the GPU, and show reasonable parallel efficiency over a small number of MPI ranks

ACOTES project: Advanced compiler technologies for embedded streaming

Streaming applications are built of data-driven, computational components, consuming and producing unbounded data streams. Streaming oriented systems have become dominant in a wide range of domains, including embedded applications and DSPs. However, programming efficiently for streaming architectures is a challenging task, having to carefully partition the computation and map it to processes in a way that best matches the underlying streaming architecture, taking into account the distributed resources (memory, processing, real-time requirements) and communication overheads (processing and delay). These challenges have led to a number of suggested solutions, whose goal is to improve the programmer’s productivity in developing applications that process massive streams of data on programmable, parallel embedded architectures. StreamIt is one such example. Another more recent approach is that developed by the ACOTES project (Advanced Compiler Technologies for Embedded Streaming). The ACOTES approach for streaming applications consists of compiler-assisted mapping of streaming tasks to highly parallel systems in order to maximize cost-effectiveness, both in terms of energy and in terms of design effort. The analysis and transformation techniques automate large parts of the partitioning and mapping process, based on the properties of the application domain, on the quantitative information about the target systems, and on programmer directives. This paper presents the outcomes of the ACOTES project, a 3-year collaborative work of industrial (NXP, ST, IBM, Silicon Hive, NOKIA) and academic (UPC, INRIA, MINES ParisTech) partners, and advocates the use of Advanced Compiler Technologies that we developed to support Embedded Streaming.Peer ReviewedPostprint (published version