Channelization for Multi-Standard Software-Defined Radio Base Stations

As the number of radio standards increase and spectrum resources come under more pressure, it becomes ever less efficient to reserve bands of spectrum for exclusive use by a single radio standard. Therefore, this work focuses on channelization structures compatible with spectrum sharing among multiple wireless standards and dynamic spectrum allocation in particular. A channelizer extracts independent communication channels from a wideband signal, and is one of the most computationally expensive components in a communications receiver. This work specifically focuses on non-uniform channelizers suitable for multi-standard Software-Defined Radio (SDR) base stations in general and public mobile radio base stations in particular. A comprehensive evaluation of non-uniform channelizers (existing and developed during the course of this work) shows that parallel and recombined variants of the Generalised Discrete Fourier Transform Modulated Filter Bank (GDFT-FB) represent the best trade-off between computational load and flexibility for dynamic spectrum allocation. Nevertheless, for base station applications (with many channels) very high filter orders may be required, making the channelizers difficult to physically implement. To mitigate this problem, multi-stage filtering techniques are applied to the GDFT-FB. It is shown that these multi-stage designs can significantly reduce the filter orders and number of operations required by the GDFT-FB. An alternative approach, applying frequency response masking techniques to the GDFT-FB prototype filter design, leads to even bigger reductions in the number of coefficients, but computational load is only reduced for oversampled configurations and then not as much as for the multi-stage designs. Both techniques render the implementation of GDFT-FB based non-uniform channelizers more practical. Finally, channelization solutions for some real-world spectrum sharing use cases are developed before some final physical implementation issues are considered

Improvement of Speech Perception for Hearing-Impaired Listeners

Hearing impairment is becoming a prevalent health problem affecting 5% of world adult populations. Hearing aids and cochlear implant already play an essential role in helping patients over decades, but there are still several open problems that prevent them from providing the maximum benefits. Financial and discomfort reasons lead to only one of four patients choose to use hearing aids; Cochlear implant users always have trouble in understanding speech in a noisy environment. In this dissertation, we addressed the hearing aids limitations by proposing a new hearing aid signal processing system named Open-source Self-fitting Hearing Aids System (OS SF hearing aids). The proposed hearing aids system adopted the state-of-art digital signal processing technologies, combined with accurate hearing assessment and machine learning based self-fitting algorithm to further improve the speech perception and comfort for hearing aids users. Informal testing with hearing-impaired listeners showed that the testing results from the proposed system had less than 10 dB (by average) difference when compared with those results obtained from clinical audiometer. In addition, Sixteen-channel filter banks with adaptive differential microphone array provides up to six-dB SNR improvement in the noisy environment. Machine-learning based self-fitting algorithm provides more suitable hearing aids settings. To maximize cochlear implant users’ speech understanding in noise, the sequential (S) and parallel (P) coding strategies were proposed by integrating high-rate desynchronized pulse trains (DPT) in the continuous interleaved sampling (CIS) strategy. Ten participants with severe hearing loss participated in the two rounds cochlear implants testing. The testing results showed CIS-DPT-S strategy significantly improved (11%) the speech perception in background noise, while the CIS-DPT-P strategy had a significant improvement in both quiet (7%) and noisy (9%) environment

Filter Optimization for Personal Sound Zones Systems

[ES] Los sistemas de zonas de sonido personal (o sus siglas en inglés PSZ) utilizan altavoces y técnicas de procesado de señal para reproducir sonidos distintos en diferentes zonas de un mismo espacio compartido. Estos sistemas se han popularizado en los últimos años debido a la amplia gama de aplicaciones que podrían verse beneficiadas por la generación de zonas de escucha individuales. El diseño de los filtros utilizados para procesar las señales de sonido es uno de los aspectos más importantes de los sistemas PSZ, al menos para las frecuencias bajas y medias. En la literatura se han propuesto diversos algoritmos para calcular estos filtros, cada uno de ellos con sus ventajas e inconvenientes. En el presente trabajo se revisan los algoritmos para sistemas PSZ propuestos en la literatura y se evalúa experimentalmente su rendimiento en un entorno reverberante. Los distintos algoritmos se comparan teniendo en cuenta aspectos como el aislamiento acústico entre zonas, el error de reproducción, la energía de los filtros y el retardo del sistema. Además, se estudian estrategias computacionalmente eficientes para obtener los filtros y también se compara su complejidad computacional. Los resultados experimentales obtenidos revelan que las soluciones existentes no pueden ofrecer una complejidad computacional baja y al mismo tiempo un buen rendimiento con baja latencia. Por ello se propone un nuevo algoritmo basado en el filtrado subbanda, y se demuestra experimentalmente que este algoritmo mitiga las limitaciones de los algoritmos existentes. Asimismo, este algoritmo ofrece una mayor versatilidad que los algoritmos existentes, ya que se pueden utilizar configuraciones distintas en cada subbanda, como por ejemplo, diferentes longitudes de filtro o distintos conjuntos de altavoces. Por último, se estudia la influencia de las respuestas objetivo en la optimización de los filtros y se propone un nuevo método en el que se aplica una ventana temporal a estas respuestas. El método propuesto se evalúa experimentalmente en dos salas con diferentes tiempos de reverberación y los resultados obtenidos muestran que se puede reducir la energía de las interferencias entre zonas gracias al efecto de la ventana temporal.[CA] Els sistemes de zones de so personal (o les seves sigles en anglés PSZ) fan servir altaveus i tècniques de processament de senyal per a reproduir sons distints en diferents zones d'un mateix espai compartit. Aquests sistemes s'han popularitzat en els últims anys a causa de l'àmplia gamma d'aplicacions que podrien veure's beneficiades per la generació de zones d'escolta individuals. El disseny dels filtres utilitzats per a processar els senyals de so és un dels aspectes més importants dels sistemes PSZ, particularment per a les freqüències baixes i mitjanes. En la literatura s'han proposat diversos algoritmes per a calcular aquests filtres, cadascun d'ells amb els seus avantatges i inconvenients. En aquest treball es revisen els algoritmes proposats en la literatura per a sistemes PSZ i s'avalua experimentalment el seu rendiment en un entorn reverberant. Els distints algoritmes es comparen tenint en compte aspectes com l'aïllament acústic entre zones, l'error de reproducció, l'energia dels filtres i el retard del sistema. A més, s'estudien estratègies de còmput eficient per obtindre els filtres i també es comparen les seves complexitats computacionals. Els resultats experimentals obtinguts revelen que les solucions existents no poder oferir al mateix temps una complexitat computacional baixa i un bon rendiment amb latència baixa. Per això es proposa un nou algoritme basat en el filtrat subbanda que mitiga aquestes limitacions. A més, l'algoritme proposat ofereix una major versatilitat que els algoritmes existents, ja que en cada subbanda el sistema pot utilitzar configuracions diferents, com per exemple, distintes longituds de filtre o distints conjunts d'altaveus. L'algoritme proposat s'avalua experimentalment en un entorn reverberant, i es mostra com pot mitigar satisfactòriament les limitacions dels algoritmes existents. Finalment, s'estudia la influència de les respostes objectiu en l'optimització dels filtres i es proposa un nou mètode en el que s'aplica una finestra temporal a les respostes objectiu. El mètode proposat s'avalua experimentalment en dues sales amb diferents temps de reverberació i els resultats obtinguts mostren que es pot reduir el nivell d'interferència entre zones grècies a l'efecte de la finestra temporal.[EN] Personal Sound Zones (PSZ) systems deliver different sounds to a number of listeners sharing an acoustic space through the use of loudspeakers together with signal processing techniques. These systems have attracted a lot of attention in recent years because of the wide range of applications that would benefit from the generation of individual listening zones, e.g., domestic or automotive audio applications. A key aspect of PSZ systems, at least for low and mid frequencies, is the optimization of the filters used to process the sound signals. Different algorithms have been proposed in the literature for computing those filters, each exhibiting some advantages and disadvantages. In this work, the state-of-the-art algorithms for PSZ systems are reviewed, and their performance in a reverberant environment is evaluated. Aspects such as the acoustic isolation between zones, the reproduction error, the energy of the filters, and the delay of the system are considered in the evaluations. Furthermore, computationally efficient strategies to obtain the filters are studied, and their computational complexity is compared too. The performance and computational evaluations reveal the main limitations of the state-of-the-art algorithms. In particular, the existing solutions can not offer low computational complexity and at the same time good performance for short system delays. Thus, a novel algorithm based on subband filtering that mitigates these limitations is proposed for PSZ systems. In addition, the proposed algorithm offers more versatility than the existing algorithms, since different system configurations, such as different filter lengths or sets of loudspeakers, can be used in each subband. The proposed algorithm is experimentally evaluated and tested in a reverberant environment, and its efficacy to mitigate the limitations of the existing solutions is demonstrated. Finally, the effect of the target responses in the optimization is discussed, and a novel approach that is based on windowing the target responses is proposed. The proposed approach is experimentally evaluated in two rooms with different reverberation levels. The evaluation results reveal that an appropriate windowing of the target responses can reduce the interference level between zones.Molés Cases, V. (2022). Filter Optimization for Personal Sound Zones Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/18611

Blind identification of acoustic systems and enhancement of reverberant speech

Imperial Users onl

A hybrid-structure offset-QAM filter-bank multi-carrier MIMO system

Offset quadrature amplitude modulation (OQAM) filter-bank multi-carrier (FBMC), has great potential for boosting the spectral efficiency (SE) and energy efficiency (EE) of future communication systems. This is due to its superior spectral localization, CP-less transmission and relaxed synchronization requirements. Our research focuses on three main OQAM/FBMC research problems: the computational complexity reduction taking equalization into consideration, its integration with multiple-input multiple-output (MIMO) and its high peak-to-average power ratio (PAPR). OQAM/FBMC systems are mainly implemented either using frequency spreading (FS) or polyphase network (PPN) techniques. The PPN technique is generally less complex, but when using frequency domain equalization (FDE) to equalize multipath channel effects at the receiver, there is a computational complexity overhead when using PPN. A novel hybrid-structure OQAM/FBMC MIMO space-frequency block coding (SFBC) system is proposed, to achieve the lowest possible overall complexity in conjunction with FDE at the receiver in frequency selective Rayleigh fading channel. The Alamouti SFBC block coding is performed on the complex-orthogonal signal before OQAM processing, which resolves the problems of intrinsic interference when integrating OQAM/FBMC with MIMO. In better multipath channel conditions with a line-of-sight (LOS) path, a zero-forcing (ZF) time domain equalization (TDE) is exploited to further reduce the computational complexity with comparable performance bit-error-rate (BER). On the other hand, to tackle the high PAPR problem of the OQAM/FBMC system in the uplink, a novel single carrier (SC)-OQAM/FBMC MIMO system is proposed. The system uses DFT-spreading applied to the OQAM modulated signal, along with interleaved subcarrier mapping to significantly reduce the PAPR and enhance the BER performance over Rayleigh fading channels, with relatively low additional computational complexity compared to the original complexity of the FBMC system and compared to other FBMC PAPR reduction techniques.The proposed hybrid-structure system has shown significant BER performance in frequency-selective Rayleigh fading channels compared to OFDM, with significantly lower OOB emissions in addition to the enhanced SE due to the absence of CP. In mild multipath fading channels with a LOS component, the PPN OQAM/FBMC MIMO using TDE has a comparable BER performance with significantly less computational complexity. As for the uplink, the SC-OQAM/FBMC MIMO system significantly reduces the PAPR and enhances the BER performance, with relatively low additional computational complexity