8,037 research outputs found
Self-Partial and Dynamic Reconfiguration Implementation for AES using FPGA
This paper addresses efficient hardware/software implementation approaches for the AES (Advanced Encryption Standard) algorithm and describes the design and performance testing algorithm for embedded system. Also, with the spread of reconfigurable hardware such as FPGAs (Field Programmable Gate Array) embedded cryptographic hardware became cost-effective. Nevertheless, it is worthy to note that nowadays, even hardwired cryptographic algorithms are not so safe. From another side, the self-reconfiguring platform is reported that enables an FPGA to dynamically reconfigure itself under the control of an embedded microprocessor. Hardware acceleration significantly increases the performance of embedded systems built on programmable logic. Allowing a FPGA-based MicroBlaze processor to self-select the coprocessors uses can help reduce area requirements and increase a system's versatility. The architecture proposed in this paper is an optimal hardware implementation algorithm and takes dynamic partially reconfigurable of FPGA. This implementation is good solution to preserve confidentiality and accessibility to the information in the numeric communication
Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators
Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device
Enhancing an Embedded Processor Core with a Cryptographic Unit for Performance and Security
We present a set of low-cost architectural enhancements to accelerate the execution of certain arithmetic operations common in cryptographic applications on an extensible embedded processor core. The proposed enhancements are generic in the sense that they can be beneficially applied in almost any RISC processor. We implemented the enhancements in form of a cryptographic unit (CU) that offers the programmer an extended instruction set. The CU features a 128-bit wide register file and datapath, which enables it to process 128-bit words and perform 128-bit loads/stores. We analyze the speed-up factors for some arithmetic operations and public-key cryptographic algorithms obtained through
these enhancements. In addition, we evaluate the hardware overhead (i.e. silicon area) of integrating the CU into an embedded RISC processor. Our experimental results show that the proposed architectural enhancements allow for a
significant performance gain for both RSA and ECC at the expense of an acceptable increase in silicon area. We also demonstrate that the proposed enhancements facilitate the protection of cryptographic algorithms against certain types of side-channel attacks and present an AES implementation
hardened against cache-based attacks as a case study
Implementing a protected zone in a reconfigurable processor for isolated execution of cryptographic algorithms
We design and realize a protected zone inside a reconfigurable and extensible embedded RISC processor for isolated execution of cryptographic algorithms. The protected zone is a collection of processor subsystems such as functional units optimized for high-speed execution of integer operations, a small amount of local memory, and general and special-purpose registers. We outline the principles for secure software implementation of cryptographic algorithms
in a processor equipped with the protected zone. We also demonstrate the efficiency and effectiveness of the protected zone by implementing major cryptographic algorithms, namely RSA, elliptic curve cryptography, and AES in the protected zone. In terms of time efficiency, software implementations
of these three cryptographic algorithms outperform equivalent software implementations on similar processors reported in the literature. The protected zone is designed in such a modular fashion that it can easily be integrated into any RISC processor; its area overhead is considerably moderate in the sense that
it can be used in vast majority of embedded processors. The protected zone can also provide the necessary support to implement TPM functionality within the boundary of a processor
Recommended from our members
LEE: Light‐Weight Energy‐Efficient encryption algorithm for sensor networks
Data confidentiality in wireless sensor networks is mainly achieved by RC5 and Skipjack encryption algorithms. However, both algorithms have their weaknesses, for example RC5 supports variable-bit rotations, which are computationally expensive operations and Skipjack uses a key length of 80-bits, which is subject to brute force attack. In this paper we introduce a light-weight energy- fficient encryption-algorithm (LEE) for tiny embedded devices, such as sensor network nodes. We present experimental results of LEE under real sensor nodes operating in TinyOS. We also discuss the secrecy of our algorithm by presenting a security analysis of various tests and cryptanalytic attacks
An IoT Endpoint System-on-Chip for Secure and Energy-Efficient Near-Sensor Analytics
Near-sensor data analytics is a promising direction for IoT endpoints, as it
minimizes energy spent on communication and reduces network load - but it also
poses security concerns, as valuable data is stored or sent over the network at
various stages of the analytics pipeline. Using encryption to protect sensitive
data at the boundary of the on-chip analytics engine is a way to address data
security issues. To cope with the combined workload of analytics and encryption
in a tight power envelope, we propose Fulmine, a System-on-Chip based on a
tightly-coupled multi-core cluster augmented with specialized blocks for
compute-intensive data processing and encryption functions, supporting software
programmability for regular computing tasks. The Fulmine SoC, fabricated in
65nm technology, consumes less than 20mW on average at 0.8V achieving an
efficiency of up to 70pJ/B in encryption, 50pJ/px in convolution, or up to
25MIPS/mW in software. As a strong argument for real-life flexible application
of our platform, we show experimental results for three secure analytics use
cases: secure autonomous aerial surveillance with a state-of-the-art deep CNN
consuming 3.16pJ per equivalent RISC op; local CNN-based face detection with
secured remote recognition in 5.74pJ/op; and seizure detection with encrypted
data collection from EEG within 12.7pJ/op.Comment: 15 pages, 12 figures, accepted for publication to the IEEE
Transactions on Circuits and Systems - I: Regular Paper
Survey and Benchmark of Block Ciphers for Wireless Sensor Networks
Cryptographic algorithms play an important role in the security architecture of wireless sensor networks (WSNs). Choosing the most storage- and energy-efficient block cipher is essential, due to the facts that these networks are meant to operate without human intervention for a long period of time with little energy supply, and that available storage is scarce on these sensor nodes. However, to our knowledge, no systematic work has been done in this area so far.We construct an evaluation framework in which we first identify the candidates of block ciphers suitable for WSNs, based on existing literature and authoritative recommendations. For evaluating and assessing these candidates, we not only consider the security properties but also the storage- and energy-efficiency of the candidates. Finally, based on the evaluation results, we select the most suitable ciphers for WSNs, namely Skipjack, MISTY1, and Rijndael, depending on the combination of available memory and required security (energy efficiency being implicit). In terms of operation mode, we recommend Output Feedback Mode for pairwise links but Cipher Block Chaining for group communications
- …