Novel sparse OBC based distributed arithmetic architecture for matrix transforms

Inner product (IP) forms the basis of a number of signal processing algorithms and applications such as transforms, filters, communication systems etc. Distributed arithmetic (DA) provides an effective methodology to implement IP of vectors and matrices using a simple combination of memory elements, adders and shifters instead of lumped multipliers. This bit level rearrangement results in much higher computational efficiencies and yields compact designs highly suited for high performance resource constrained applications. Offset binary coding (OBC) is an effective technique to further optimize the DA, and allows us to reduce the memory requirements by a factor of two, with minimum additional computational complexity. This makes OBC-DA attractive for applications that are both resource and memory constrained. In addition, sparse matrix factorization techniques can be exploited to further reduce the size of the DA-ROMs. In this paper, the design and implementation of a novel OBC based DA is demonstrated using a generic architecture for implementing discrete orthogonal transforms (DOTs). Implementation is performed on the Xilinx Virtex-II Pro field programmable gate array (FPGA), and a detailed comparison between conventional and OBC based DA is presented to highlight the trade offs in various design metrics including performance, area and power

Efficient FPGA implementation and power modelling of image and signal processing IP cores

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed

Efficient FPGA implementation and power modelling of image and signal processing IP cores

Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Efficient architectures and power modelling of multiresolution analysis algorithms on FPGA

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In the past two decades, there has been huge amount of interest in Multiresolution Analysis Algorithms (MAAs) and their applications. Processing some of their applications such as medical imaging are computationally intensive, power hungry and requires large amount of memory which cause a high demand for efficient algorithm implementation, low power architecture and acceleration. Recently, some MAAs such as Finite Ridgelet Transform (FRIT) Haar Wavelet Transform (HWT) are became very popular and they are suitable for a number of image processing applications such as detection of line singularities and contiguous edges, edge detection (useful for compression and feature detection), medical image denoising and segmentation. Efficient hardware implementation and acceleration of these algorithms particularly when addressing large problems are becoming very chal-lenging and consume lot of power which leads to a number of issues including mobility, reliability concerns. To overcome the computation problems, Field Programmable Gate Arrays (FPGAs) are the technology of choice for accelerating computationally intensive applications due to their high performance. Addressing the power issue requires optimi- sation and awareness at all level of abstractions in the design flow. The most important achievements of the work presented in this thesis are summarised here. Two factorisation methodologies for HWT which are called HWT Factorisation Method1 and (HWTFM1) and HWT Factorasation Method2 (HWTFM2) have been explored to increase number of zeros and reduce hardware resources. In addition, two novel efficient and optimised architectures for proposed methodologies based on Distributed Arithmetic (DA) principles have been proposed. The evaluation of the architectural results have shown that the proposed architectures results have reduced the arithmetics calculation (additions/subtractions) by 33% and 25% respectively compared to direct implementa-tion of HWT and outperformed existing results in place. The proposed HWTFM2 is implemented on advanced and low power FPGA devices using Handel-C language. The FPGAs implementation results have outperformed other existing results in terms of area and maximum frequency. In addition, a novel efficient architecture for Finite Radon Trans-form (FRAT) has also been proposed. The proposed architecture is integrated with the developed HWT architecture to build an optimised architecture for FRIT. Strategies such as parallelism and pipelining have been deployed at the architectural level for efficient im-plementation on different FPGA devices. The proposed FRIT architecture performance has been evaluated and the results outperformed some other existing architecture in place. Both FRAT and FRIT architectures have been implemented on FPGAs using Handel-C language. The evaluation of both architectures have shown that the obtained results out-performed existing results in place by almost 10% in terms of frequency and area. The proposed architectures are also applied on image data (256 £ 256) and their Peak Signal to Noise Ratio (PSNR) is evaluated for quality purposes. Two architectures for cyclic convolution based on systolic array using parallelism and pipelining which can be used as the main building block for the proposed FRIT architec-ture have been proposed. The first proposed architecture is a linear systolic array with pipelining process and the second architecture is a systolic array with parallel process. The second architecture reduces the number of registers by 42% compare to first architec-ture and both architectures outperformed other existing results in place. The proposed pipelined architecture has been implemented on different FPGA devices with vector size (N) 4,8,16,32 and word-length (W=8). The implementation results have shown a signifi-cant improvement and outperformed other existing results in place. Ultimately, an in-depth evaluation of a high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called func-tional level power modelling approach have been presented. The mathematical techniques that form the basis of the proposed power modeling has been validated by a range of custom IP cores. The proposed power modelling is scalable, platform independent and compares favorably with existing approaches. A hybrid, top-down design flow paradigm integrating functional level power modelling with commercially available design tools for systematic optimisation of IP cores has also been developed. The in-depth evaluation of this tool enables us to observe the behavior of different custom IP cores in terms of power consumption and accuracy using different design methodologies and arithmetic techniques on virous FPGA platforms. Based on the results achieved, the proposed model accuracy is almost 99% true for all IP core's Dynamic Power (DP) components.Thomas Gerald Gray Charitable Trus

Efficient VLSI Architectures for Image Compression Algorithms

An image, in its original form, contains huge amount of data which demands not only large amount of memory requirements for its storage but also causes inconvenient transmission over limited bandwidth channel. Image compression reduces the data from the image in either lossless or lossy way. While lossless image compression retrieves the original image data completely, it provides very low compression. Lossy compression techniques compress the image data in variable amount depending on the quality of image required for its use in particular application area. It is performed in steps such as image transformation, quantization and entropy coding. JPEG is one of the most used image compression standard which uses discrete cosine transform (DCT) to transform the image from spatial to frequency domain. An image contains low visual information in its high frequencies for which heavy quantization can be done in order to reduce the size in the transformed representation. Entropy coding follows to further reduce the redundancy in the transformed and quantized image data. Real-time data processing requires high speed which makes dedicated hardware implementation most preferred choice. The hardware of a system is favored by its lowcost and low-power implementation. These two factors are also the most important requirements for the portable devices running on battery such as digital camera. Image transform requires very high computations and complete image compression system is realized through various intermediate steps between transform and final bit-streams. Intermediate stages require memory to store intermediate results. The cost and power of the design can be reduced both in efficient implementation of transforms and reduction/removal of intermediate stages by employing different techniques. The proposed research work is focused on the efficient hardware implementation of transform based image compression algorithms by optimizing the architecture of the system. Distribute arithmetic (DA) is an efficient approach to implement digital signal processing algorithms. DA is realized by two different ways, one through storage of precomputed values in ROMs and another without ROM requirements. ROM free DA is more efficient. For the image transform, architectures of one dimensional discrete Hartley transform (1-D DHT) and one dimensional DCT (1-D DCT) have been optimized using ROM free DA technique. Further, 2-D separable DHT (SDHT) and 2-D DCT architectures have been implemented in row-column approach using two 1-D DHT and two 1-D DCT respectively. A finite state machine (FSM) based architecture from DCT to quantization has been proposed using the modified quantization matrix in JPEG image compression which requires no memory in storage of quantization table and DCT coefficients. In addition, quantization is realized without use of multipliers that require more area and are power hungry. For the entropy encoding, Huffman coding is hardware efficient than arithmetic coding. The use of Huffman code table further simplifies the implementation. The strategies have been used for the significant reduction of memory bits in storage of Huffman code table and the complete Huffman coding architecture encodes the transformed coefficients one bit per clock cycle. Direct implementation algorithm of DCT has the advantage that it is free of transposition memory to store intermediate 1-D DCT. Although recursive algorithms have been a preferred method, these algorithms have low accuracy resulting in image quality degradation. A non-recursive equation for the direct computation of DCT coefficients have been proposed and implemented in both 0.18 µm ASIC library as well as FPGA. It can compute DCT coefficients in any order and all intermediate computations are free of fractions and hence very high image quality has been obtained in terms of PSNR. In addition, one multiplier and one register bit-width need to be changed for increasing the accuracy resulting in very low hardware overhead. The architecture implementation has been done to obtain zig-zag ordered DCT coefficients. The comparison results show that this implementation has less area in terms of gate counts and less power consumption than the existing DCT implementations. Using this architecture, the complete JPEG image compression system has been implemented which has Huffman coding module, one multiplier and one register as the only additional modules. The intermediate stages (DCT to Huffman encoding) are free of memory, hence efficient architecture is obtained

Efficient architectures and power modelling of multiresolution analysis algorithms on FPGA

In the past two decades, there has been huge amount of interest in Multiresolution Analysis Algorithms (MAAs) and their applications. Processing some of their applications such as medical imaging are computationally intensive, power hungry and requires large amount of memory which cause a high demand for efficient algorithm implementation, low power architecture and acceleration. Recently, some MAAs such as Finite Ridgelet Transform (FRIT) Haar Wavelet Transform (HWT) are became very popular and they are suitable for a number of image processing applications such as detection of line singularities and contiguous edges, edge detection (useful for compression and feature detection), medical image denoising and segmentation. Efficient hardware implementation and acceleration of these algorithms particularly when addressing large problems are becoming very chal-lenging and consume lot of power which leads to a number of issues including mobility, reliability concerns. To overcome the computation problems, Field Programmable Gate Arrays (FPGAs) are the technology of choice for accelerating computationally intensive applications due to their high performance. Addressing the power issue requires optimi- sation and awareness at all level of abstractions in the design flow. The most important achievements of the work presented in this thesis are summarised here. Two factorisation methodologies for HWT which are called HWT Factorisation Method1 and (HWTFM1) and HWT Factorasation Method2 (HWTFM2) have been explored to increase number of zeros and reduce hardware resources. In addition, two novel efficient and optimised architectures for proposed methodologies based on Distributed Arithmetic (DA) principles have been proposed. The evaluation of the architectural results have shown that the proposed architectures results have reduced the arithmetics calculation (additions/subtractions) by 33% and 25% respectively compared to direct implementa-tion of HWT and outperformed existing results in place. The proposed HWTFM2 is implemented on advanced and low power FPGA devices using Handel-C language. The FPGAs implementation results have outperformed other existing results in terms of area and maximum frequency. In addition, a novel efficient architecture for Finite Radon Trans-form (FRAT) has also been proposed. The proposed architecture is integrated with the developed HWT architecture to build an optimised architecture for FRIT. Strategies such as parallelism and pipelining have been deployed at the architectural level for efficient im-plementation on different FPGA devices. The proposed FRIT architecture performance has been evaluated and the results outperformed some other existing architecture in place. Both FRAT and FRIT architectures have been implemented on FPGAs using Handel-C language. The evaluation of both architectures have shown that the obtained results out-performed existing results in place by almost 10% in terms of frequency and area. The proposed architectures are also applied on image data (256 £ 256) and their Peak Signal to Noise Ratio (PSNR) is evaluated for quality purposes. Two architectures for cyclic convolution based on systolic array using parallelism and pipelining which can be used as the main building block for the proposed FRIT architec-ture have been proposed. The first proposed architecture is a linear systolic array with pipelining process and the second architecture is a systolic array with parallel process. The second architecture reduces the number of registers by 42% compare to first architec-ture and both architectures outperformed other existing results in place. The proposed pipelined architecture has been implemented on different FPGA devices with vector size (N) 4,8,16,32 and word-length (W=8). The implementation results have shown a signifi-cant improvement and outperformed other existing results in place. Ultimately, an in-depth evaluation of a high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called func-tional level power modelling approach have been presented. The mathematical techniques that form the basis of the proposed power modeling has been validated by a range of custom IP cores. The proposed power modelling is scalable, platform independent and compares favorably with existing approaches. A hybrid, top-down design flow paradigm integrating functional level power modelling with commercially available design tools for systematic optimisation of IP cores has also been developed. The in-depth evaluation of this tool enables us to observe the behavior of different custom IP cores in terms of power consumption and accuracy using different design methodologies and arithmetic techniques on virous FPGA platforms. Based on the results achieved, the proposed model accuracy is almost 99% true for all IP core's Dynamic Power (DP) components.EThOS - Electronic Theses Online ServiceThomas Gerald Gray Charitable TrustGBUnited Kingdo

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings

Reconfigurable Computing For Video Coding

Video coding is widely used in our daily life. Due to its high computational complexity, hardware implementation is usually preferred. In this research, we investigate both ASIC hardware design approach and reconfigurable hardware design approach for video coding applications. First, we present a unified architecture that can perform Discrete Cosine Transform (DCT), Inverse Discrete Cosine Transform (IDCT), DCT domain motion estimation and compensation (DCT-ME/MC). Our proposed architecture is a Wavefront Array-based Processor with a highly modular structure consisting of 8*8 Processing Elements (PEs). By utilizing statistical properties and arithmetic operations, it can be used as a high performance hardware accelerator for video transcoding applications. We show how different core algorithms can be mapped onto the same hardware fabric and can be executed through the pre-defined PEs. In addition to the simplified design process of the proposed architecture and savings of the hardware resources, we also demonstrate that high throughput rate can be achieved for IDCT and DCT-MC by fully utilizing the sparseness property of DCT coefficient matrix. Compared to fixed hardware architecture using ASIC design approach, reconfigurable hardware design approach has higher flexibility, lower cost, and faster time-to-market. We propose a self-reconfigurable platform which can reconfigure the architecture of DCT computations during run-time using dynamic partial reconfiguration. The scalable architecture for DCT computations can compute different number of DCT coefficients in the zig-zag scan order to adapt to different requirements, such as power consumption, hardware resource, and performance. We propose a configuration manager which is implemented in the embedded processor in order to adaptively control the reconfiguration of scalable DCT architecture during run-time. In addition, we use LZSS algorithm for compression of the partial bitstreams and on-chip BlockRAM as a cache to reduce latency overhead for loading the partial bitstreams from the off-chip memory for run-time reconfiguration. A hardware module is designed for parallel reconfiguration of the partial bitstreams. The experimental results show that our approach can reduce the external memory accesses by 69% and can achieve 400 MBytes/s reconfiguration rate. Detailed trade-offs of power, throughput, and quality are investigated, and used as a criterion for self-reconfiguration. Prediction algorithm of zero quantized DCT (ZQDCT) to control the run-time reconfiguration of the proposed scalable architecture has been used, and 12 different modes of DCT computations including zonal coding, multi-block processing, and parallel-sequential stage modes are supported to reduce power consumptions, required hardware resources, and computation time with a small quality degradation. Detailed trade-offs of power, throughput, and quality are investigated, and used as a criterion for self-reconfiguration to meet the requirements set by the users

Sensor encoding using lateral inhibited, self-organized cellular neural networks

The paper focuses on the division of the sensor field into subsets of sensor events and proposes the linear transformation with the smallest achievable error for reproduction: the transform coding approach using the principal component analysis (PCA). For the implementation of the PCA, this paper introduces a new symmetrical, lateral inhibited neural network model, proposes an objective function for it and deduces the corresponding learning rules. The necessary conditions for the learning rate and the inhibition parameter for balancing the crosscorrelations vs. the autocorrelations are computed. The simulation reveals that an increasing inhibition can speed up the convergence process in the beginning slightly. In the remaining paper, the application of the network in picture encoding is discussed. Here, the use of non-completely connected networks for the self-organized formation of templates in cellular neural networks is shown. It turns out that the self-organizing Kohonen map is just the non-linear, first order approximation of a general self-organizing scheme. Hereby, the classical transform picture coding is changed to a parallel, local model of linear transformation by locally changing sets of self-organized eigenvector projections with overlapping input receptive fields. This approach favors an effective, cheap implementation of sensor encoding directly on the sensor chip. Keywords: Transform coding, Principal component analysis, Lateral inhibited network, Cellular neural network, Kohonen map, Self-organized eigenvector jets