Design of efficient constant weight codes

In a constant weight code, each code word contains a constant number of 1's. If this number is equal to half the length of the code word then the code is called balanced. These codes find many applications in computer and communication systems noise reduction in VLSI systems, fault masking in bus lines of VLSI systems, rejection of the low frequency components in digital communication systems, delay insensitive communications in asynchronous systems, data transmission in fiber optics, data storage in optical discs and magnetic tapes, fault tolerant synchronous circuits, etc. This thesis presents new efficient design methods for constant weight codes suitable to these applications. The proposed codes require low redundancy but at the same time have fast and simple encoding/decoding algorithms

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Fault-tolerant computation in semigroups and semirings

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.Includes bibliographical references (leaves 107-109).by Christoforos N. Hadjicostis.M.Eng

Fault-tolerant computation in semigroups and semirings

"May 1995."Includes bibliographical references (p. 82-84).Supported in part by the Department of the Navy, Office of the Chief of Naval Research as part of the Advanced Research Projects Agency's RASSP program. N00014-93-1-0686Christoforos N. Hadjicostis

Hardware Error Detection Using AN-Codes

Due to the continuously decreasing feature sizes and the increasing complexity of integrated circuits, commercial off-the-shelf (COTS) hardware is becoming less and less reliable. However, dedicated reliable hardware is expensive and usually slower than commodity hardware. Thus, economic pressure will most likely result in the usage of unreliable COTS hardware in safety-critical systems. The usage of unreliable, COTS hardware in safety-critical systems results in the need for software-implemented solutions for handling execution errors caused by this unreliable hardware. In this thesis, we provide techniques for detecting hardware errors that disturb the execution of a program. The detection provided facilitates handling of these errors, for example, by retry or graceful degradation. We realize the error detection by transforming unsafe programs that are not guaranteed to detect execution errors into safe programs that detect execution errors with a high probability. Therefore, we use arithmetic AN-, ANB-, ANBD-, and ANBDmem-codes. These codes detect errors that modify data during storage or transport and errors that disturb computations as well. Furthermore, the error detection provided is independent of the hardware used. We present the following novel encoding approaches: - Software Encoded Processing (SEP) that transforms an unsafe binary into a safe execution at runtime by applying an ANB-code, and - Compiler Encoded Processing (CEP) that applies encoding at compile time and provides different levels of safety by using different arithmetic codes. In contrast to existing encoding solutions, SEP and CEP allow to encode applications whose data and control flow is not completely predictable at compile time. For encoding, SEP and CEP use our set of encoded operations also presented in this thesis. To the best of our knowledge, we are the first ones that present the encoding of a complete RISC instruction set including boolean and bitwise logical operations, casts, unaligned loads and stores, shifts and arithmetic operations. Our evaluations show that encoding with SEP and CEP significantly reduces the amount of erroneous output caused by hardware errors. Furthermore, our evaluations show that, in contrast to replication-based approaches for detecting errors, arithmetic encoding facilitates the detection of permanent hardware errors. This increased reliability does not come for free. However, unexpectedly the runtime costs for the different arithmetic codes supported by CEP compared to redundancy increase only linearly, while the gained safety increases exponentially

Hardware Error Detection Using AN-Codes

Due to the continuously decreasing feature sizes and the increasing complexity of integrated circuits, commercial off-the-shelf (COTS) hardware is becoming less and less reliable. However, dedicated reliable hardware is expensive and usually slower than commodity hardware. Thus, economic pressure will most likely result in the usage of unreliable COTS hardware in safety-critical systems. The usage of unreliable, COTS hardware in safety-critical systems results in the need for software-implemented solutions for handling execution errors caused by this unreliable hardware. In this thesis, we provide techniques for detecting hardware errors that disturb the execution of a program. The detection provided facilitates handling of these errors, for example, by retry or graceful degradation. We realize the error detection by transforming unsafe programs that are not guaranteed to detect execution errors into safe programs that detect execution errors with a high probability. Therefore, we use arithmetic AN-, ANB-, ANBD-, and ANBDmem-codes. These codes detect errors that modify data during storage or transport and errors that disturb computations as well. Furthermore, the error detection provided is independent of the hardware used. We present the following novel encoding approaches: - Software Encoded Processing (SEP) that transforms an unsafe binary into a safe execution at runtime by applying an ANB-code, and - Compiler Encoded Processing (CEP) that applies encoding at compile time and provides different levels of safety by using different arithmetic codes. In contrast to existing encoding solutions, SEP and CEP allow to encode applications whose data and control flow is not completely predictable at compile time. For encoding, SEP and CEP use our set of encoded operations also presented in this thesis. To the best of our knowledge, we are the first ones that present the encoding of a complete RISC instruction set including boolean and bitwise logical operations, casts, unaligned loads and stores, shifts and arithmetic operations. Our evaluations show that encoding with SEP and CEP significantly reduces the amount of erroneous output caused by hardware errors. Furthermore, our evaluations show that, in contrast to replication-based approaches for detecting errors, arithmetic encoding facilitates the detection of permanent hardware errors. This increased reliability does not come for free. However, unexpectedly the runtime costs for the different arithmetic codes supported by CEP compared to redundancy increase only linearly, while the gained safety increases exponentially