Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

Calcul sur architecture non fiable

Although materials could be fabricated as error-free theoretically with a huge cost for worst-case design methodologies, the circuit is still susceptible to transient faults by the effects of radiation, temperature sensitivity, and etc. On the contrary, an error-resilient design enables the manufacturing process to be relieved from the variability issue so as to save material cost. Since variability and transient upsets are worsening as emerging fabrication process and size shrink are tending intense, the requirement of robust design is imminent. This thesis addresses the issue of designing on unreliable circuit. The main contributions are fourfold. Firstly a fast error-correction and low cost redundancy fault-tolerant method is presented. Moreover, we introduce judicious two-dimensional criteria to estimate the reliability and the hardware efficiency of a circuit. A general-purpose model offers low-redundancy error-resilience for contemporary logic systems as well as future nanoeletronic architectures. At last, a decoder against internal transient faults is designed in this work.En théorie, les circuits électroniques conçus selon la méthode du pire-cas sont supposés garantir un fonctionnement sans erreur pourun coût d’implémentation élevé. Dans la pratique les circuits restent sujets aux erreurs transitoires du fait de leur sensibilité aux aléastels que la radiation et la température. En revanche, une conception prenant en compte la tolérance aux fautes permet de faire face à detels aléas comme la variabilité du processus de fabrication. De plus, les erreurs transitoires et la variabilité de fabrication s’intensifientavec l’émergence de nouveaux processus de fabrication et des circuits de dimension de plus en plus réduite. La demande d’une conceptionintégrant la tolérance aux fautes devient désormais primordiale. La présente thèse a pour objectif de cerner la problématique de laconception de circuits sur des puces peu fiables et apporte des contributions suivant quatre aspects. Dans un premier temps, nous proposonsune méthode de tolérance aux fautes, basée sur la correction d’erreurs et la redondance à faible coût. Puis, nous présentonsun critère bidimensionnel judicieux permettant d’évaluer la fiabilité et l’efficacité matérielle de circuits. Nous proposons ensuite un modèleuniversel qui apporte une tolérance avec fautes à redondance faible pour les systèmes logiques d’aujourd’hui et les architecturesnanoélectroniques de demain. Enfin, nous découvrons un décodeur tolérant aux fautes transitoires internes

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

An Approach to Emulate and Validate the Effects of Single Event Upsets using the PREDICT FUTRE Hardware Integrated Framework

Due to the advances in electronics design automation industry, worldwide, the integrated approach to model and emulate the single event effects due to cosmic radiation, in particular single event upsets or single event transients is gaining momentum. As of now, no integrated methodology to inject the fault in parallel to functional test vectors or to estimate the effects of radiation for a selected function in system on chip at design phase exists. In this paper, a framework, PRogrammable single Event effects Demonstrator for dIgital Chip Technologies (PREDICT) failure assessment for radiation effects is developed using a hardware platform and aided by genetic algorithms addressing all the above challenges. A case study is carried out to evaluate the frameworks capability to emulate the effects of radiation using the co-processor as design under test (DUT) function. Using the ML605 and Virtex-6 evaluation board for single and three particle simulations with the layered atmospheric conditions, the proposed framework consumes approximately 100 min and 300 min, respectively; it consumes 600 min for 3 particle random atmospheric conditions, using the 64 GB RAM, 64-bit operating system with 3.1 GHz processor based workstation. The framework output transforms the 4 MeVcm2/mg linear energy transfer to a single event transient pulse width of 2 μs with 105 amplification factor for visualisation, which matches well with the existing experimental results data. Using the framework, the effects of radiation for the co-processing module are estimated during the design phase and the success rate of the DUT is found to be 48 per cent

Approximate and timing-speculative hardware design for high-performance and energy-efficient video processing

Since the end of transistor scaling in 2-D appeared on the horizon, innovative circuit design paradigms have been on the rise to go beyond the well-established and ultraconservative exact computing. Many compute-intensive applications – such as video processing – exhibit an intrinsic error resilience and do not necessarily require perfect accuracy in their numerical operations. Approximate computing (AxC) is emerging as a design alternative to improve the performance and energy-efficiency requirements for many applications by trading its intrinsic error tolerance with algorithm and circuit efficiency. Exact computing also imposes a worst-case timing to the conventional design of hardware accelerators to ensure reliability, leading to an efficiency loss. Conversely, the timing-speculative (TS) hardware design paradigm allows increasing the frequency or decreasing the voltage beyond the limits determined by static timing analysis (STA), thereby narrowing pessimistic safety margins that conventional design methods implement to prevent hardware timing errors. Timing errors should be evaluated by an accurate gate-level simulation, but a significant gap remains: How these timing errors propagate from the underlying hardware all the way up to the entire algorithm behavior, where they just may degrade the performance and quality of service of the application at stake? This thesis tackles this issue by developing and demonstrating a cross-layer framework capable of performing investigations of both AxC (i.e., from approximate arithmetic operators, approximate synthesis, gate-level pruning) and TS hardware design (i.e., from voltage over-scaling, frequency over-clocking, temperature rising, and device aging). The cross-layer framework can simulate both timing errors and logic errors at the gate-level by crossing them dynamically, linking the hardware result with the algorithm-level, and vice versa during the evolution of the application’s runtime. Existing frameworks perform investigations of AxC and TS techniques at circuit-level (i.e., at the output of the accelerator) agnostic to the ultimate impact at the application level (i.e., where the impact is truly manifested), leading to less optimization. Unlike state of the art, the framework proposed offers a holistic approach to assessing the tradeoff of AxC and TS techniques at the application-level. This framework maximizes energy efficiency and performance by identifying the maximum approximation levels at the application level to fulfill the required good enough quality. This thesis evaluates the framework with an 8-way SAD (Sum of Absolute Differences) hardware accelerator operating into an HEVC encoder as a case study. Application-level results showed that the SAD based on the approximate adders achieve savings of up to 45% of energy/operation with an increase of only 1.9% in BD-BR. On the other hand, VOS (Voltage Over-Scaling) applied to the SAD generates savings of up to 16.5% in energy/operation with around 6% of increase in BD-BR. The framework also reveals that the boost of about 6.96% (at 50°) to 17.41% (at 75° with 10- Y aging) in the maximum clock frequency achieved with TS hardware design is totally lost by the processing overhead from 8.06% to 46.96% when choosing an unreliable algorithm to the blocking match algorithm (BMA). We also show that the overhead can be avoided by adopting a reliable BMA. This thesis also shows approximate DTT (Discrete Tchebichef Transform) hardware proposals by exploring a transform matrix approximation, truncation and pruning. The results show that the approximate DTT hardware proposal increases the maximum frequency up to 64%, minimizes the circuit area in up to 43.6%, and saves up to 65.4% in power dissipation. The DTT proposal mapped for FPGA shows an increase of up to 58.9% on the maximum frequency and savings of about 28.7% and 32.2% on slices and dynamic power, respectively compared with stat

NASA Space Engineering Research Center for VLSI systems design

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design

Methods to improve the reliability and resiliency of near/sub-threshold digital circuits

Energy consumption is one of the primary bottlenecks to both large and small scale modern compute platforms. Reducing the operating voltage of digital circuits to voltages where the supply voltage is near or below the threshold of the transistors has recently gained attention as a method to reduce the energy required for computations by as much as 6 times. However, when operating at near/sub-threshold voltages (where the supply voltage is near or below the threshold of the transistors), imperfections in transistor manufacturing, changes in temperature, and other difficult-to-predict factors cause wide variations in the timing of Complementary Metal-Oxide Semiconductor (CMOS) circuits due to an increased sensitivity at lower voltages. These increased variations result in poor aggregate performance and cause increased rates of error occurrence in computation. This work introduces several new methods to improve the reliability of near/sub-threshold circuits. The first is a design automation technique that is used to aid in low-voltage digital standard cell synthesis. Second, two circuit-level techniques are also introduced that aim to improve the reliability and resiliency of digital circuits by means of completion/error detection. These techniques are shown to improve speed and lower energy consumption at low overheads compared to previous methods. Most importantly, these circuit-level methods are specifically designed to operate at low voltages and can themselves tolerate variations and operation in harsh environments. Finally, a test-chip prototype designed in 65nm-CMOS demonstrates the practicality and feasibility of a proposed current sensing error detector

The 1992 4th NASA SERC Symposium on VLSI Design

Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design