Energy Efficient Loop Unrolling for Low-Cost FPGAs

Many embedded applications implement block ciphers and sorting and searching algorithms which use multiple loop iterations for computation. These applications often demand low power operation. The power consumption of designs varies with the implementation choices made by designers. The sequential implementation of loop operations consumes minimal area, but latency and clock power are high. Alternatively, loop unrolling causes high glitch power. In this work, we propose a low area overhead approach for unrolling loop iterations that exhibits reduced glitch power. A latch based glitch filter is introduced that reduces the propagation of glitches from one iteration to next. We explore the optimal number of filters to be inserted for different applications that give a good balance between area and power. We also implement partial unrolling with glitch filters. This approach consumes less area while still giving energy savings comparable to the fully unrolled implementation. Our approach is targeted to Xilinx and Altera FPGAs. We simulate different implementation choices and compare energy results to evaluate the savings. We demonstrate our approach on SIMON-128 and AES-256 block ciphers and a sorting algorithm. We prototype our design on Xilinx Artix-7 and Altera Cyclone-IV-GX FPGA development boards and measure the actual power savings. Results show up-to 90% dynamic energy reduction in Xilinx designs, and 97% reduction in Altera designs with our glitch filtering approach due to glitch power reduction

Design and analysis of an FPGA-based, multi-processor HW-SW system for SCC applications

The last 30 years have seen an increase in the complexity of embedded systems from a collection of simple circuits to systems consisting of multiple processors managing a wide variety of devices. This ever increasing complexity frequently requires that high assurance, fail-safe and secure design techniques be applied to protect against possible failures and breaches. To facilitate the implementation of these embedded systems in an efficient way, the FPGA industry recently created new families of devices. New features added to these devices include anti-tamper monitoring, bit stream encryption, and optimized routing architectures for physical and functional logic partition isolation. These devices have high capacities and are capable of implementing processors using their reprogrammable logic structures. This allows for an unprecedented level of hardware and software interaction within a single FPGA chip. High assurance and fail-safe systems can now be implemented within the reconfigurable hardware fabric of an FPGA, enabling these systems to maintain flexibility and achieve high performance while providing a high level of data security. The objective of this thesis was to design and analyze an FPGA-based system containing two isolated, softcore Nios processors that share data through two crypto-engines. FPGA-based single-chip cryptographic (SCC) techniques were employed to ensure proper component isolation when the design is placed on a device supporting the appropriate security primitives. Each crypto-engine is an implementation of the Advanced Encryption Standard (AES), operating in Galois/Counter Mode (GCM) for both encryption and authentication. The features of the microprocessors and architectures of the AES crypto-engines were varied with the goal of determining combinations which best target high performance, minimal hardware usage, or a combination of the two

Studies on high-speed hardware implementation of cryptographic algorithms

Cryptographic algorithms are ubiquitous in modern communication systems where they have a central role in ensuring information security. This thesis studies efficient implementation of certain widely-used cryptographic algorithms. Cryptographic algorithms are computationally demanding and software-based implementations are often too slow or power consuming which yields a need for hardware implementation. Field Programmable Gate Arrays (FPGAs) are programmable logic devices which have proven to be highly feasible implementation platforms for cryptographic algorithms because they provide both speed and programmability. Hence, the use of FPGAs for cryptography has been intensively studied in the research community and FPGAs are also the primary implementation platforms in this thesis. This thesis presents techniques allowing faster implementations than existing ones. Such techniques are necessary in order to use high-security cryptographic algorithms in applications requiring high data rates, for example, in heavily loaded network servers. The focus is on Advanced Encryption Standard (AES), the most commonly used secret-key cryptographic algorithm, and Elliptic Curve Cryptography (ECC), public-key cryptographic algorithms which have gained popularity in the recent years and are replacing traditional public-key cryptosystems, such as RSA. Because these algorithms are well-defined and widely-used, the results of this thesis can be directly applied in practice. The contributions of this thesis include improvements to both algorithms and techniques for implementing them. Algorithms are modified in order to make them more suitable for hardware implementation, especially, focusing on increasing parallelism. Several FPGA implementations exploiting these modifications are presented in the thesis including some of the fastest implementations available in the literature. The most important contributions of this thesis relate to ECC and, specifically, to a family of elliptic curves providing faster computations called Koblitz curves. The results of this thesis can, in their part, enable increasing use of cryptographic algorithms in various practical applications where high computation speed is an issue

Hardware Design and Implementation of Role-Based Cryptography

Traditional public key cryptographic methods provide access control to sensitive data by allowing the message sender to grant a single recipient permission to read the encrypted message. The Need2Know® system (N2K) improves upon these methods by providing role-based access control. N2K defines data access permissions similar to those of a multi-user file system, but N2K strictly enforces access through cryptographic standards. Since custom hardware can efficiently implement many cryptographic algorithms and can provide additional security, N2K stands to benefit greatly from a hardware implementation. To this end, the main N2K algorithm, the Key Protection Module (KPM), is being specified in VHDL. The design is being built and tested incrementally: this first phase implements the core control logic of the KPM without integrating its cryptographic sub-modules. Both RTL simulation and formal verification are used to test the design. This is the first N2K implementation in hardware, and it promises to provide an accelerated and secured alternative to the software-based system. A hardware implementation is a necessary step toward highly secure and flexible deployments of the N2K system

Comparative Study of Keccak SHA-3 Implementations

This paper conducts an extensive comparative study of state-of-the-art solutions for im- plementing the SHA-3 hash function. SHA-3, a pivotal component in modern cryptography, has spawned numerous implementations across diverse platforms and technologies. This research aims to provide valuable insights into selecting and optimizing Keccak SHA-3 implementations. Our study encompasses an in-depth analysis of hardware, software, and software–hardware (hybrid) solutions. We assess the strengths, weaknesses, and performance metrics of each approach. Critical factors, including computational efficiency, scalability, and flexibility, are evaluated across differ- ent use cases. We investigate how each implementation performs in terms of speed and resource utilization. This research aims to improve the knowledge of cryptographic systems, aiding in the informed design and deployment of efficient cryptographic solutions. By providing a comprehensive overview of SHA-3 implementations, this study offers a clear understanding of the available options and equips professionals and researchers with the necessary insights to make informed decisions in their cryptographic endeavors

Assessing Scrubbing Techniques for Xilinx SRAM-based FPGAs in Space Applications

SRAM-based FPGAs are becoming increasingly attractive for use in space applications due to their reconfigurability and signal processing capabilities, as well as their increasing speed and capacity. Traditional SRAM-based FPGAs, however, are highly sensitive to the ionizing radiation environment in space, making them prone to radiation-induced memory upsets. In this paper, we evaluate and compare scrubbing techniques for Xilinx SRAM-based FPGAs with respect to radiation-induced single event upsets. A test framework using an exchangeable payload is developed for this purpose and run on a Xilinx Virtex-5 FPGA. We show that recent SRAM-based FPGAs can constitute a cost-efficient alternative to radiation-hardened or antifuse FPGAs for non-critical space application such as satellite instruments

On The Cost of ASIC Hardware Crackers: A SHA-1 Case Study

International audienceIn February 2017, the SHA-1 hashing algorithm was practically broken using an identical-prefix collision attack implemented on a GPU cluster, and in January 2020 a chosen-prefix collision was first computed with practical implications on various security protocols. These advances opened the door for several research questions, such as the minimal cost to perform these attacks in practice. In particular, one may wonder what is the best technology for software/hardware cryptanalysis of such primitives. In this paper, we address some of these questions by studying the challenges and costs of building an ASIC cluster for performing attacks against a hash function. Our study takes into account different scenarios and includes two cryptanalytic strategies that can be used to find such collisions: a classical generic birthday search, and a state-of-the-art differential attack using neutral bits for SHA-1. We show that for generic attacks, GPU and ASIC poses a serious practical threat to primitives with security level ∼ 64 bits, with rented GPU a good solution for a one-off attack, and ASICs more efficient if the attack has to be run a few times. ASICs also pose a non-negligible security risk for primitives with 80-bit security. For differential attacks, GPUs (purchased or rented) are often a very cost-effective choice, but ASIC provides an alternative for organizations that can afford the initial cost and look for a compact, energy-efficient, reusable solution. In the case of SHA-1, we show that an ASIC cluster costing a few millions would be able to generate chosen-prefix collisions in a day or even in a minute. This extends the attack surface to TLS and SSH, for which the chosen-prefix collision would need to be generated very quickly