Design, analysis and evaluation of sigma-delta based beamformers for medical ultrasound imaging applications

The inherent analogue nature of medical ultrasound signals in conjunction with the abundant merits provided by digital image acquisition, together with the increasing use of relatively simple front-end circuitries, have created considerable demand for single-bit beamformers in digital ultrasound imaging systems. Furthermore, the increasing need to design lightweight ultrasound systems with low power consumption and low noise, provide ample justification for development and innovation in the use of single-bit beamformers in ultrasound imaging systems. The overall aim of this research program is to investigate, establish, develop and confirm through a combination of theoretical analysis and detailed simulations, that utilize raw phantom data sets, suitable techniques for the design of simple-to-implement hardware efficient digital ultrasound beamformers to address the requirements for 3D scanners with large channel counts, as well as portable and lightweight ultrasound scanners for point-of-care applications and intravascular imaging systems. In addition, the stability boundaries of higher-order High-Pass (HP) and Band-Pass (BP) Σ−Δ modulators for single- and dual- sinusoidal inputs are determined using quasi-linear modeling together with the describing-function method, to more accurately model the modulator quantizer. The theoretical results are shown to be in good agreement with the simulation results for a variety of input amplitudes, bandwidths, and modulator orders. The proposed mathematical models of the quantizer will immensely help speed up the design of higher order HP and BP Σ−Δ modulators to be applicable for digital ultrasound beamformers. Finally, a user friendly design and performance evaluation tool for LP, BP and HP modulators is developed. This toolbox, which uses various design methodologies and covers an assortment of modulators topologies, is intended to accelerate the design process and evaluation of modulators. This design tool is further developed to enable the design, analysis and evaluation of beamformer structures including the noise analyses of the final B-scan images. Thus, this tool will allow researchers and practitioners to design and verify different reconstruction filters and analyze the results directly on the B-scan ultrasound images thereby saving considerable time and effort

Micromechanical resonator based bandpass sigma-delta modulator

Master'sMASTER OF ENGINEERIN

Design and Implementation of Novel FPGA Based Time-Interleaved Variable Centre-Frequency Digital Sigma-Delta Modulators

Novel, multi-path, time-interleaved digital sigma-delta modulators that can operate at any arbitrary frequency from DC to Nyquist are designed, analysed and synthesized in this study. Dual- and quadruple-path fourth-order Butterworth, Chebyshev, Inverse Chebyshev and Elliptical based digital sigma-delta modulators, which offer designers the flexibility of specifying the centre-frequency, pass-band/stop-band attenuation as well as the signal bandwidth are presented. These topologies are compared in terms of their signal-to-noise ratios, hardware complexity, stability, tonality and sensitivity to non-idealities. Detailed simulations performed at the behavioural-level in MATLAB are compared with the experimental results of the FPGA implementation of the designed modulators. The signal-to-noise ratios between the simulated and empirical results are shown to be different by not more than 3-5 dBs. Furthermore, this paper presents the mathematical modelling and evaluation of the tones caused by the finite wordlengths of these digital multi-path sigma-delta modulators when excited by sinusoidal input signals

Bandpass delta-sigma modulators for radio receivers

This thesis concerns discrete-time (DT) bandpass (BP) ΔΣ modulators targeted for intermediate frequency (IF) analog-to-digital (A/D) conversion in radio receivers. The receiver architecture adopted has to be capable of operating with different radio frequencies, channel bandwidths, and modulation techniques. This is necessary in order to achieve an extensive operating area and the possibility of utilizing a local mobile phone standard or a standard suitable for a specific service. The digital IF receiver is a good choice for a multi-mode and multi-band mobile phone receiver, because the signal demodulation and channel filtering are performed in the digital domain. This increases the flexibility of the receiver and relieves the design of the baseband part, but an A/D conversion with high dynamic range and low power dissipation is required. BP ΔΣ modulators are capable of converting a high-frequency narrow band signal and are therefore suitable for signal digitization in an IF receiver. First, the theory of BP ΔΣ modulators is introduced. It has been determined that resonators are the most critical circuit blocks in the implementation of a high performance BP ΔΣ modulator. Different DT resonator topologies are studied and a double-delay (DD) resonator is found to be the best candidate for a high quality resonator. A new DD switched-capacitor (SC) resonator structure has been designed. Furthermore, two evolution versions of the designed SC resonator are presented and their nonidealities are analyzed. The three designed DD SC resonator structures are a main point of the thesis, together with the experimental results. Five different DT BP ΔΣ modulator circuit structures have been implemented and measured. All three of the designed SC resonators are used in the implemented circuits. The experimental work consists of both single-bit and multi-bit structures, as well as both single-loop and cascade architectures. The circuits have been implemented with a 0.35 μm (Bi)CMOS technology and operate with a 3.0 V supply. The measured maximum signal-to-noise-and-distortion ratios (SNDRs) are 78 dB over 270 kHz (GSM), 75 dB over 1.25 MHz (IS-95), 69 dB over 1.762 MHz (DECT), and 48 dB over 3.84 MHz (WCDMA) bandwidths using a 60 MHz IF signal.reviewe

The design of a 250MHz CMOS bandpass sigma-delta A/D modulator with continuous-time circuitry

Master'sMASTER OF ENGINEERIN

Multi-stage noise shaping (MASH) delta-sigma modulators for wideband and multi-standard applications

Imperial Users onl